View source for Proebsting's paradox

{{for|general derivations and discussion of fictitious forces|Fictitious force}}
{{Classical mechanics|cTopic=Core topics}}{{see also|Classical mechanics|Analytical mechanics}}

This article describes a '''particle in planar motion'''<ref name=planar>See for example, {{Cite book |title=Theory of Machines and Mechanisms |author=John Joseph Uicker, Gordon R. Pennock, Joseph Edward Shigley |isbn=0-19-515598-X |publisher=Oxford University Press |year=2003 |page=10 |url=http://books.google.com/books?id=KE6HMtnXE_0C&pg=PA479&dq=fictitious+planar+motion&lr=&as_brr=0&sig=ACfU3U2TFBjf8E4Nkyj-kTjHGHXSpcNjjw#PPA10,M1}}, {{cite book |title=A Modern Approach to Classical Mechanics |author=Harald Iro |url=http://books.google.com/books?id=-L5ckgdxA5YC&pg=PA152&dq=fictitious+%22planar+motion%22&lr=&as_brr=0&sig=ACfU3U3BDRobLRePjhDfBe4xkg5pfAQ7xg#PPA28,M1 |page=Chapter 3 and Chapter 4 |publisher =World Scientific |year=2002 |isbn=981-238-213-5}}</ref>  when observed from [[non-inertial frame of reference|non-inertial reference frames]].<ref name=fictitious>''[[Fictitious force]]s'' (also known as a ''pseudo forces'', ''inertial forces'' or ''d'Alembert forces''), exist for observers in a non-inertial reference frames. See, for example, {{cite book |title=Einstein's Theory of Relativity|author=Max Born & Günther Leibfried|url=http://books.google.com/books?id=Afeff9XNwgoC&pg=PA76&dq=%22inertial+forces%22&lr=&as_brr=0&sig=0kiN27BqUqHaZ9CkPdqLIjr-Nnw#PPA77,M1
|pages=76–78|isbn=0-486-60769-0|publisher=Courier Dover Publications|location=New York|year=1962}}, [http://www-istp.gsfc.nasa.gov/stargaze/Sframes2.htm NASA: ''Accelerated Frames of Reference: Inertial Forces''], [http://regentsprep.org/Regents/physics/phys06/bcentrif/centrif.htm Science Joy Wagon: ''Centrifugal force - the ''false'' force'']</ref>   <!--

REF
--><ref name=Marsden>{{cite book |title=Introduction to Mechanics and Symmetry: A Basic Exposition of Classical Mechanical Systems |author=Jerrold E. Marsden, Tudor S. Ratiu |isbn=0-387-98643-X |year=1999 |publisher=Springer |page=251 |url=http://books.google.com/books?id=I2gH9ZIs-3AC&pg=PA251&vq=Euler+force&dq=isbn:038798643X&source=gbs_search_s&sig=ACfU3U0DkJL1h3lGMMbXyKY15GtPpspHuQ}}</ref><ref name=Taylor1>{{cite book |author=John Robert Taylor|title=Classical Mechanics |page=Chapter 9, pp. 327 ff |url=http://books.google.com/books?id=P1kCtNr-pJsC&pg=PP1&dq=isbn:189138922X&lr=&as_brr=0&sig=JVfFlMT5TvXh1I64JAFBFq7pA6s#PPA327,M1
|isbn=1-891389-22-X|publisher=University Science Books|location=Sausalito CA|year=2004}}</ref> The most famous examples of planar motion are related to the motion of two spheres that are gravitationally attracted to one another, and the generalization of this problem to [[planetary motion]].<ref name=Scheck>{{cite book |title=Mechanics |author=Florian Scheck |page=13 |url =http://books.google.com/books?id=UhYyuUEUFrUC&pg=PA13&dq=fictitious+planar+motion&lr=&as_brr=0&sig=ACfU3U37S7B9qjCksFxp_akPVkeGuLQiWw |publisher=Birkhäuser |year=2005 |isbn=3-540-21925-0 |edition=4th}}</ref> See [[Centrifugal force (rotating reference frame)#Planetary motion|centrifugal force]], [[two-body problem]], [[orbit]] and [[Kepler's laws of planetary motion]]. Those problems fall in the general field of [[analytical dynamics]], the determination of orbits from given laws of force.<ref name=Whittaker1>
{{cite book |title=A Treatise on the Analytical Dynamics of Particles and Rigid Bodies: With an Introduction to the Problem of Three Bodies |author=Edmund Taylor Whittaker |isbn=0-521-35883-3 |publisher=Cambridge University Press |page=Chapter 1, p. 1 |year=1988 |edition=Fourth edition of 1936 with foreword by Sir William McCrea |url=http://books.google.com/books?id=epH1hCB7N2MC&printsec=frontcover&dq=inauthor:%22E+T+Whittaker%22&lr=&as_brr=0&sig=SN7_oYmNYM4QRSgjULXBU5jeQrA&source=gbs_book_other_versions_r&cad=0_2#PPA1,M1 }}</ref> This article is focused more on the [[kinematics|kinematical]] issues surrounding planar motion, that is, determination of the forces necessary to result in a certain trajectory ''given'' the particle trajectory. 
General results presented in [[fictitious force]]s here are applied to observations of a moving particle as seen from several specific non-inertial frames, for example, a ''local'' frame (one tied to the moving particle so it appears stationary), and  a ''co-rotating'' frame (one with an arbitrarily located but fixed axis and a rate of rotation that makes the particle appear to have only radial motion and zero [[azimuth]]al motion). The Lagrangian approach to fictitious forces is introduced.

Unlike real [[force]]s such as [[electromagnetic force]]s, fictitious forces do not originate from physical interactions between objects.

==Analysis using fictitious forces==
The appearance of fictitious forces normally is associated with use of a [[non-inertial frame of reference]], and their absence with use of an [[inertial frame of reference]]. The connection between inertial frames and [[fictitious force]]s (also called ''inertial forces'' or ''pseudo-forces''), is expressed, for example, by Arnol'd:<ref name=Arnold>{{cite book |title=Mathematical Methods of Classical Mechanics |page=129 |author=V. I. Arnol'd |isbn=978-0-387-96890-2 |year=1989 |url=http://books.google.com/books?as_q=&num=10&btnG=Google+Search&as_epq=additional+terms+called+inertial+forces.+This+allows+us+to+detect+experimentally&as_oq=&as_eq=&as_brr=0&lr=&as_vt=&as_auth=&as_pub=&as_sub=&as_drrb=c&as_miny=&as_maxy=&as_isbn=|publisher=Springer}}</ref>
{{Quotation|The equations of motion in an non-inertial system differ from the equations in an inertial system by additional terms called inertial forces. This allows us to detect experimentally the non-inertial nature of a system.|V. I. Arnol'd: ''Mathematical Methods of Classical Mechanics'' Second Edition, p. 129}}
  
A slightly different tack on the subject is provided by Iro:<ref name=Iro>{{cite book |url= http://books.google.com/books?id=-L5ckgdxA5YC&pg=PA179&dq=force+%22non-inertial+%22&lr=&as_brr=0&sig=ACfU3U3fCW68SLm1zalPZWi0LvLK4DrXYg#PPA180,M1 |author = Harald Iroh |page=180 |title=A Modern Approach to Classical Mechanics |isbn=981-238-213-5 |publisher=World Scientific |year=2002}}</ref>
{{Quotation|An additional force due to nonuniform relative motion of two reference frames is called a ''pseudo-force''.|H Iro in ''A Modern Approach to Classical Mechanics'' p. 180}}

Fictitious forces do not appear in the [[Newton's laws of motion|equations of motion]] in an [[inertial frame of reference]]: in an inertial frame, the motion of an object is explained by the real impressed forces. In a non-inertial frame such as a rotating frame, however,  Newton's first and second laws still can be used to make accurate physical predictions provided fictitious forces are included along with the real forces. For solving problems of mechanics in non-inertial reference frames, the advice given in textbooks is to treat the fictitious forces like real forces and to pretend you are in an inertial frame.<!--

REF
--><ref name=Hand>{{cite book |title=Analytical Mechanics |author =Louis N. Hand, Janet D. Finch |page=267 |url=http://books.google.com/books?id=1J2hzvX2Xh8C&pg=PA267&vq=fictitious+forces&dq=Hand+inauthor:Finch&lr=&as_brr=0&source=gbs_search_s&sig=ACfU3U33emV_6eJZihu3M6IZKurSt85_eg
|isbn=0-521-57572-9 |publisher=Cambridge University Press |year=1998 }}</ref><!--
-->
<!--

REF
--><ref name=Rao1>{{cite book |title=Classical Mechanics |author=K.S. Rao |page=162 |url=http://books.google.com/books?id=Al7LRzoQhxsC&pg=PA268&vq=by+adding+the+terms&dq=real+%22inertial+forces%22&lr=&as_brr=0&source=gbs_search_s&sig=ACfU3U0uHeQp1Yb_zTlGk50Hj40vcMVkHg#PPA162,M1
|isbn=81-7371-436-3 |year=2003 |publisher=Orient Longman  }}</ref>
{{Quotation|Treat the fictitious forces like real forces, and pretend you are in an inertial frame.|Louis N. Hand, Janet D. Finch ''Analytical Mechanics'', p. 267}}

It should be mentioned that "treating the fictitious forces like real forces" means, in particular, that fictitious forces as seen in a particular non-inertial frame transform as ''vectors'' under coordinate transformations made within that frame, that is, like real forces.

==Moving objects and observational frames of reference==
Next, it is observed that time varying coordinates are used in both inertial and non-inertial frames of reference, so the use of time varying coordinates should not be confounded with a change of observer, but is only a change of the observer's choice of description.  Elaboration of this point and some citations on the subject follow.

===Frame of reference and coordinate system===
The term [[frame of reference]] is used often in a very broad sense, but for the present discussion its meaning is restricted to refer to an observer's ''state of motion'', that is, to either an [[inertial frame]] of reference or a [[non-inertial frame]] of reference.

The term [[coordinate system]] is used to differentiate between different possible choices for a set of variables to describe motion, choices available to any observer, regardless of their state of motion. Examples are [[Cartesian coordinates]], [[polar coordinates]] and (more generally) [[curvilinear coordinates]].
 
Here are two quotes relating "state of motion" and "coordinate system":<ref name=Lyle>{{cite book  |title=Handbook of Continuum Mechanics: General Concepts, Thermoelasticity |page= 9 |author=Jean Salençon, Stephen Lyle |url=http://books.google.com/books?id=H3xIED8ctfUC&pg=PA9&dq=physical+%22frame+of+reference%22&lr=&as_brr=0&sig=ACfU3U1tEWQICZdsXeuLyfmH2PoLgZnMGA
|isbn=3-540-41443-6 |year=2001 |publisher=Springer  }}</ref><ref name=Norton>John D. Norton (1993). [http://www.pitt.edu/~jdnorton/papers/decades.pdf ''General covariance and the foundations of general relativity: eight decades of dispute''], ''Rep. Prog. Phys.'', '''56''', pp. 835-6.</ref>

{{Quotation|We first introduce the notion of ''reference frame'', itself related to the idea of ''observer'': the reference frame is, in some sense, the "Euclidean space carried by the observer". Let us give a more mathematical definition:… the reference frame is... the set of all points in the Euclidean space with the rigid body motion of the observer. The frame, denoted <math>\mathfrak{R}</math>, is said to move with the observer.… The spatial positions of particles are labelled relative to a frame <math>\mathfrak{R}</math> by establishing a ''coordinate system'' ''R'' with origin ''O''. The corresponding set of axes, sharing the rigid body motion of the frame <math>\mathfrak{R}</math>, can be considered to give a physical realization of <math>\mathfrak{R}</math>. In a frame <math>\mathfrak{R}</math>, coordinates are changed from ''R'' to ''R''{{'}}{{Clarify|date=November 2013|reason=Should this be a Prime (symbol) instead of an apostrophe?}} by carrying out, at each instant of time, the same coordinate transformation on the components of ''intrinsic'' objects (vectors and tensors) introduced to represent physical quantities ''in this frame''.| Jean Salençon, Stephen Lyle. (2001). ''Handbook of Continuum Mechanics: General Concepts, Thermoelasticity'' p. 9}}

{{Quotation|In traditional developments of special and general relativity it has been customary not to distinguish between two quite distinct ideas. The first is the notion of a coordinate system, understood simply as the smooth, invertible assignment of four numbers to events in spacetime neighborhoods. The second, the frame of reference, refers to an idealized system used to assign such numbers …  To avoid unnecessary restrictions, we can divorce this arrangement from metrical notions. … Of special importance for our purposes is that each frame of reference has a definite state of motion at each event of spacetime.…Within the context of special relativity and as long as we restrict ourselves to frames of reference in inertial motion, then little of importance depends on the difference between an inertial frame of reference and the inertial coordinate system it induces. This comfortable circumstance ceases immediately once we begin to consider frames of reference in nonuniform motion even within special relativity.…the notion of frame of reference has reappeared as a structure distinct from a coordinate system.|John D. Norton: ''General Covariance and the Foundations of General Relativity: eight decades of dispute'', ''Rep. Prog. Phys.'', '''56''', pp. 835-7.}}

===Time varying coordinate systems===
In a general coordinate system, the basis vectors for the coordinates may vary in time at fixed positions, or they may vary with position at fixed times, or both. It may be noted that coordinate systems attached to both inertial frames and non-inertial frames can have basis vectors that vary in time, space or both, for example the description of a trajectory in polar coordinates as seen from an inertial frame.<ref name=Moore>See Moore and Stommel, Chapter 2, p. 26, which deals with polar coordinates in an inertial frame of reference (what these authors call a "Newtonian frame of reference"), {{cite book |page=26 |author=Henry Stommel & Dennis W. Moore |title=An Introduction to the Coriolis Force |url=http://books.google.com/books?id=-JQx_t3yGB4C&printsec=frontcover&dq=coriolis+inauthor:Stommel&lr=&as_brr=0&sig=ACfU3U0gX4wrzVzo7bwD7I8HJ_bd24e2Rg#PPA26,M1  |isbn=0-231-06636-8 |year=1989 |publisher=Columbia University Press}}</ref> or as seen from a rotating frame.<ref name=Moore2>For example, Moore and Stommel point our that in a ''rotating'' polar coordinate system, the acceleration terms include reference to the rate of rotation of the  ''rotating frame''. {{cite book |page=55 |author=Henry Stommel & Dennis W. Moore |title=An Introduction to the Coriolis Force |url=http://books.google.com/books?id=-JQx_t3yGB4C&printsec=frontcover&dq=coriolis+inauthor:Stommel&lr=&as_brr=0&sig=ACfU3U0gX4wrzVzo7bwD7I8HJ_bd24e2Rg#PPA55,M1}}</ref> A time-dependent ''description'' of observations does not change the frame of reference in which the observations are made and recorded.

==Fictitious forces in a local coordinate system==
{{anchor|Figure 1}}
[[File:Local unit vectors.PNG|thumb |315px|Figure 1: Local coordinate system for planar motion on a curve. Two different positions are shown for distances ''s'' and ''s'' + ''ds'' along the curve. At each position ''s'', unit vector '''u'''<sub>n</sub> points along the outward normal to the curve and unit vector '''u'''<sub>t</sub> is tangential to the path. The radius of curvature of the path  is ρ as found from the rate of rotation of the tangent to the curve with respect to arc length, and is the radius of the [[osculating circle]] at position ''s''.  The unit circle on the left shows the rotation of the unit vectors with ''s''.]]
{{see also|Generalized forces|Curvilinear coordinates|Generalized coordinates|Frenet-Serret formulas}}
In discussion of a particle moving in a circular orbit,<ref name=particle>The term ''particle'' is used in mechanics to describe an object without reference to its orientation. The term [[rigid body]] is used when orientation is also a factor. Thus, the [[center of mass]] of a rigid body is a "particle".</ref> in an inertial frame of reference one can identify the centripetal and tangential forces. It then seems to be no problem to switch hats, change perspective, and talk about the fictitious forces commonly called the [[Centrifugal force (rotating reference frame)|centrifugal]] and [[Euler force]]. But what underlies this switch in vocabulary is a change of observational frame of reference from the inertial frame where we started, where centripetal and tangential forces make sense, to a rotating frame of reference where the particle appears motionless and fictitious centrifugal and Euler forces have to be brought into play. That switch is unconscious, but real.

Suppose we sit on a particle in general planar motion (not just a circular orbit). What analysis underlies a switch of hats to introduce fictitious centrifugal and Euler forces?

To explore that question, begin in an inertial frame of reference. By using a coordinate system commonly used in planar motion, the so-called [[Centripetal force#Local coordinates|''local'' coordinate system]],<ref name=observer>Observational frames of reference and [[coordinate system]]s are independent ideas. A frame of reference is a physical notion related to the observer's state of motion. A coordinate system is a mathematical description, which can be chosen to suit the observations.  A change to a coordinate system that moves in time affects the description of the particle motion, but does not change the observer's state of motion. For more discussion, see [[Frame of reference]]</ref> as shown in [[#Figure 1|Figure 1]], it becomes easy to identify formulas for the centripetal inward force normal to the trajectory (in direction opposite to '''u<sub>n</sub>''' in [[#Figure 1|Figure 1]]), and the tangential force parallel to the trajectory (in direction '''u<sub>t</sub>'''), as shown next.

To introduce the unit vectors of the local coordinate system shown in [[#Figure 1|Figure 1]], one approach is to begin in Cartesian coordinates in an inertial framework and describe the local coordinates in terms of these Cartesian coordinates. In [[#Figure 1|Figure 1]], the [[arc length]] ''s'' is the distance the particle has traveled along its path in time ''t''.  The path '''r''' (''t'') with components ''x''(''t''), ''y''(''t'') in Cartesian coordinates is described using arc length ''s''(''t'') as:<ref name=curvature>The article on [[curvature]] treats a more general case where the curve is parametrized by an arbitrary variable (denoted ''t''), rather than by the arc length ''s''.</ref>
:<math>\mathbf{r}(s) = \left[ x(s),\ y(s) \right] \ . </math>
[[File:Skywriter.JPG|thumb |180px |The arc length ''s(t)'' measures distance along the skywriter's trail. Image from [http://asrs.arc.nasa.gov/docs/cb/cb_343.pdf NASA ASRS]]]
One way to look at the use of ''s'' is to think of the path of the particle as sitting in space, like the trail left by a [[Skywriting|skywriter]], independent of time. Any position on this path is described by stating its distance ''s'' from some starting point on the path. Then an incremental displacement along the path ''ds'' is described by:
:<math>d\mathbf{r}(s) = \left[ dx(s),\ dy(s) \right]=\left[ x'(s),\ y'(s) \right] ds  \ , </math>
where primes are introduced to denote derivatives with respect to ''s''. The magnitude of this displacement is ''ds'', showing that:<ref name=Shabana0>{{cite book |title=Railroad Vehicle Dynamics: A Computational Approach |author=Ahmed A. Shabana, Khaled E. Zaazaa, Hiroyuki Sugiyama |page=91 |url=http://books.google.com/books?id=YgIDSQT0FaUC&pg=RA1-PA207&dq=%22generalized+coordinate%22&lr=&as_brr=0&sig=ACfU3U2tosoLUEAUNkGu2x8TTtuxLfeLGQ#PRA1-PA91,M1
|isbn=1-4200-4581-4 |publisher=CRC Press |year=2007   }}</ref>
:<math>\left[ x'(s)^2 + y'(s)^2 \right] = 1 \ . </math>&ensp;&ensp;&ensp;&ensp;{{anchor|Eq. 1}}(Eq. 1)
This displacement is necessarily tangent to the curve at ''s'', showing that the unit vector tangent to the curve is:
:<math>\mathbf{u}_t(s) = \left[ x'(s), \ y'(s) \right] \ , </math>
while the outward unit vector normal to the curve is 
:<math>\mathbf{u}_n(s) = \left[ y'(s),\ -x'(s) \right] \ , </math>
Orthogonality can be verified by showing the vector [[dot product]] is zero. The unit magnitude of these vectors is a consequence of [[#Eq. 1|Eq. 1]].

As an aside, notice that the use of unit vectors that are not aligned along the Cartesian ''xy''-axes does not mean we are no longer in an inertial frame. All it means is that we are using unit vectors that vary with ''s'' to describe the path, but still observe the motion from the inertial frame.

Using the tangent vector, the angle of the tangent to the curve, say θ, is given by:
:<math>\sin \theta =\frac{y'(s)}{\sqrt{x'(s)^2+y'(s)^2}} = y'(s) \ ;</math> &ensp; and &ensp; <math>\cos \theta =\frac{x'(s)}{\sqrt{x'(s)^2+y'(s)^2}} = x'(s) \ .</math>
The radius of curvature is introduced completely formally (without need for geometric interpretation) as:
:<math>\frac{1}{\rho} = \frac{d\theta}{ds}\ . </math>
The derivative of θ can be found from that for sin θ:
:<math>\frac{d \sin\theta}{ds} = \cos \theta \frac {d\theta}{ds} = \frac{1}{\rho} \cos \theta \  </math>
::<math> = \frac{1}{\rho} x'(s)\ . </math>
Now:
:<math>\frac{d \sin \theta }{ds} = \frac{d}{ds} \frac{y'(s)}{\sqrt{x'(s)^2+y'(s)^2}}</math>&ensp;&ensp;<math>= \frac{y''(s)x'(s)^2-y'(s)x'(s)x''(s)} {\left(x'(s)^2+y'(s)^2\right)^{3/2}}\ , </math>
in which the denominator is unity according to [[#Eq. 1|Eq. 1]]. With this formula for the derivative of the sine, the radius of curvature becomes:
:<math>\frac {d\theta}{ds} = \frac{1}{\rho} = y''(s)x'(s) - y'(s)x''(s)\ </math>&ensp;<math>=\frac{y''(s)}{x'(s)} = -\frac{x''(s)}{y'(s)} \ ,</math>
where the equivalence of the forms stems from differentiation of [[#Eq. 1|Eq. 1]]:
:<math>x'(s)x''(s) + y'(s)y''(s) = 0 \ . </math>
Having set up the description of any position on the path in terms of its associated value for ''s'', and having found the properties of the path in terms of this description, motion of the particle is introduced by stating the particle position at any time ''t'' as the corresponding value ''s (t)''.

Using the above results for the path properties in terms of ''s'', the acceleration in the inertial reference frame as described in terms of the components normal and tangential to the path of the particle can be found in terms of the function ''s''(''t'') and its various time derivatives (as before, ''primes'' indicate differentiation with respect to ''s''):
:<math>\mathbf{a}(s) = \frac{d}{dt}\mathbf{v}(s) </math>&ensp;&ensp;<math>= \frac{d}{dt}\left[\frac{ds}{dt} \left( x'(s), \ y'(s) \right) \right]\  </math>
::<math> = \left(\frac{d^2s}{dt^2}\right)\mathbf{u}_t(s) +\left(\frac{ds}{dt}\right) ^2 \left(x''(s),\ y''(s) \right) </math>
::<math> = \left(\frac{d^2s}{dt^2}\right)\mathbf{u}_t(s) - \left(\frac{ds}{dt}\right) ^2 \frac{1}{\rho} \mathbf{u}_n(s) \ , </math>
as can be verified by taking the dot product with the unit vectors '''u'''<sub>t</sub>(''s'') and  '''u'''<sub>n</sub>(''s''). This result for acceleration is the same as that for circular motion based on the radius ρ.  Using this coordinate system in the inertial frame, it is easy to identify the force normal to the trajectory as the centripetal force and that parallel to the trajectory as the tangential force.

Next, we change observational frames. Sitting on the particle, we adopt a non-inertial frame where the particle is at rest (zero velocity). This frame has a continuously changing origin, which at time ''t'' is the center of curvature (the center of the [[osculating circle]] in [[#Figure 1|Figure 1]]) of the path at time ''t'', and whose rate of rotation is the angular rate of motion of the particle about that origin at time ''t''. This non-inertial frame also employs unit vectors normal to the trajectory and parallel to it.

The [[angular velocity]] of this frame is the angular velocity of the particle about the center of curvature at time ''t''.  The centripetal force of the inertial frame is interpreted  in the non-inertial frame where the body is at rest as a force necessary to overcome the centrifugal force. Likewise, the force causing any acceleration of speed along the path seen in the inertial frame becomes the force necessary to overcome the Euler force in the non-inertial frame where the particle is at rest. There is zero Coriolis force in the frame, because the particle has zero velocity in this frame. For a pilot in an airplane, for example, these fictitious forces are a matter of direct experience.<ref name=Coriolis>However, the pilot also will experience Coriolis force, because the pilot is not a ''particle''. When the pilot's head moves, for example, the head has a velocity in the non-inertial frame, and becomes subject to Coriolis force. This force causes pilot disorientation in a turn. See [[Coriolis effect (perception)]], {{cite book |title=Space biology and medicine |author=Arnauld E. Nicogossian |page=337 |url=http://books.google.com/books?id=aO6zut2K7lsC&pg=PA337&dq=Coriolis+effect+airplane+nausea&lr=&as_brr=0&sig=ACfU3U2ODlvCKri-JbJfB-OdyhXyhozbnw
|isbn=1-56347-180-9 |year=1996 |publisher=American Institute of Aeronautics and Astronautics, Inc |location=Reston, VA}}, and {{cite book |title=Fundamentals of Space Medicine |author=Gilles Clément |page=41 |url=http://books.google.com/books?id=Neura4O-taIC&pg=PA41&dq=Coriolis+effect+airplane+nausea&lr=&as_brr=0&sig=ACfU3U16LpzGILe3QVGIeOl5tyYFDAKLrA
|isbn=1-4020-1598-4 |year=2003 |publisher=Springer}}.</ref>  However, these fictitious forces cannot be related to a simple observational frame of reference other than the particle itself, unless it is in a particularly simple path, like a circle.

That said, from a qualitative standpoint, the path of an airplane can be approximated by an arc of a circle for a limited time, and for the limited time a particular radius of curvature applies, the centrifugal and Euler forces can be analyzed on the basis of circular motion with that radius. See article discussing [[Banked turn#Aviation|turning an airplane]].

Next, reference frames rotating about a fixed axis are discussed in more detail.

==Fictitious forces in polar coordinates==
{{main|polar coordinates}}
Description of particle motion often is simpler in non-Cartesian coordinate systems, for example, polar coordinates. When equations of motion are expressed in terms of any curvilinear coordinate system, extra terms appear that represent how the basis vectors change as the coordinates change. These terms arise automatically on transformation to polar (or cylindrical) coordinates and are thus not fictitious ''forces'', but rather are simply added ''terms'' in the acceleration in polar coordinates.<ref name=Jakobsen>{{cite book |title=Chemical Reactor Modeling |author=Hugo A Jakobsen |page=724 |url=http://books.google.com/books?id=mrP6RNajRs0C&pg=PA724&dq=reactive+centrifugal&lr= |isbn=3-540-25197-9 |year=2007 |publisher=Springer}}</ref>

===Two terminologies===
In a purely mathematical treatment, regardless of the frame that the coordinate system is associated with (inertial or non-inertial), extra terms appear in the acceleration of an observed particle when using curvilinear coordinates. For example, in polar coordinates the acceleration is given by (see below for details):
::<math>\boldsymbol{a} = \frac{d\boldsymbol{v}}{dt} =\frac{d^2\mathbf{r}}{dt^2} = (\ddot r - r\dot\theta^2)\hat{\boldsymbol{r}} + (r\ddot\theta + 2\dot r \dot\theta)\hat{\boldsymbol\theta} \ , </math>
which contains not just double time derivatives of the coordinates but added terms. This example employs polar coordinates, but more generally the added terms depend upon which coordinate system is chosen (that is, polar, elliptic, or whatever).
Sometimes these coordinate-system dependent ''terms'' also are referred to as "fictitious forces", introducing a second meaning for "fictitious forces", despite the fact that these terms do not have the vector [[General covariance|transformation properties]] expected of forces. For example, see Shankar<ref name=Shankar>{{cite book |title=Principles of Quantum Mechanics |author=Ramamurti Shankar |edition=2nd Edition |page=81 |url=http://books.google.com/books?id=2zypV5EbKuIC&pg=PA81&dq=Coriolis+%22polar+coordinates%22&lr=&as_brr=0 |year=1994 |isbn=0-306-44790-8 |publisher=Springer  }}</ref> and Hildebrand.<ref name=Hildebrand>{{cite book |author=Francis Begnaud Hildebrand |title=Methods of Applied Mathematics |page=156 |url=http://books.google.com/books?id=17EZkWPz_eQC&pg=PA156&dq=absence+fictitious+force&lr=&as_brr=0&sig=ACfU3U1rrR7AnDqhMl7XJkkOEMJLr8co2Q |isbn=0-486-67002-3 |publisher=Courier Dover Publications |year=1992 |edition=Reprint of 2nd Edition of 1965}}</ref> According to this terminology, fictitious forces are determined in part by the coordinate system itself, regardless of the frame it is attached to, that is, regardless of whether the coordinate system is attached to an inertial or a non-inertial frame of reference. In contrast, the fictitious forces defined in terms of the ''state of motion of the observer'' vanish in inertial frames of reference. To distinguish these two terminologies, the fictitious forces that vanish in an inertial frame of reference, the inertial forces of Newtonian mechanics, are called in this article the "state-of-motion" fictitious forces and those that originate in the interpretation of time derivatives in particular coordinate systems are called "coordinate" fictitious forces.<ref name=terminology>Although used in this article, these names are not in common use. Alternative names sometimes found are "Newtonian fictitious force" instead of "state-of-motion" fictitious force, and "generalized fictitious force" instead of "coordinate fictitious force". This last term originates in the Lagrangian formulation for mechanics using generalized coordinates. See {{cite book |author=Francis Begnaud Hildebrand |title=Methods of Applied Mathematics |page=156 |url=http://books.google.com/books?id=17EZkWPz_eQC&pg=PA156&dq=absence+fictitious+force&lr=&as_brr=0&sig=ACfU3U1rrR7AnDqhMl7XJkkOEMJLr8co2Q |isbn=0-486-67002-3 |publisher=Courier Dover Publications |year=1992 |edition=Reprint of 2nd Edition of 1965}}</ref>

Assuming it is clear that "state of motion" and "coordinate system" are ''different'', it follows that the dependence of centrifugal force (as in this article) upon "state of motion" and its independence from "coordinate system", which contrasts with the "coordinate" version with exactly the opposite dependencies, indicates that two different ideas are referred to by the terminology "fictitious force". The present article emphasizes one of these two ideas ("state-of-motion"), although the other also is described.

Below, polar coordinates are introduced for use in (first) an inertial frame of reference and then (second) in a rotating frame of reference. The two different uses of the term "fictitious force" are pointed out. First, however, follows a brief digression to explain further how the "coordinate" terminology for fictitious force has arisen.

====Lagrangian approach====
{{see also|Lagrangian|Lagrangian mechanics|Generalized coordinates|Euler-Lagrange equations}}

To motivate the introduction of "coordinate" inertial forces by more than a reference to "mathematical convenience", what follows is a digression to show these forces correspond to what are called by some authors "generalized" fictitious forces or "generalized inertia forces".<ref name=Greenberg>{{cite book |title=Advanced Dynamics |author= Donald T. Greenwood |isbn=0-521-82612-8 |publisher=Cambridge University Press |year=2003 |page=77 |url=http://books.google.com/books?id=r2CSj1A-zWQC&pg=PA237&dq=%22generalized+inertia+force%22&lr=&as_brr=0&sig=ACfU3U3MK5xDZDKq3p-tuf-vNz-li-0Flw#PPA77,M1    }}</ref><ref name=Amirouche>{{cite book |title=Fundamentals of Multibody Dynamics: Theory and Applications |author=Farid M. L. Amirouche |page=207 |url=http://books.google.com/books?id=_nlEcQYldeIC&pg=PA497&dq=%22generalized+inertial+force%22&lr=&as_brr=0&sig=ACfU3U1WZwSvXxTsX2BG4NwmgqAx5aa0ew#PPA207,M1 |isbn=0-8176-4236-6 |publisher=Springer |year=2006   }}</ref><ref name=Joseph>{{cite book |author= Harold Josephs, Ronald L. Huston |title=Dynamics of Mechanical Systems |page=377 |url=http://books.google.com/books?id=vZeeO7J68EIC&pg=PA377&dq=%22generalized+inertia+force%22&lr=&as_brr=0&sig=ACfU3U0BRjNDkpj5MtRcyJCcTbuzu-N0Nw#PPA377,M1 |isbn=0-8493-0593-4 |publisher=CRC Press |year=2002  }}</ref><ref name= Shabana>{{cite book |title=Computational Dynamics |page=217 |url=http://books.google.com/books?id=KUJkG13VF98C&pg=PA217&dq=%22generalized+inertia+force%22&lr=&as_brr=0&sig=ACfU3U37S59yoqvW8V-FZQ4PVAIB3CzGJQ |author= Ahmed A. Shabana |isbn=0-471-37144-0 |publisher=Wiley |year=2001  }}</ref> These forces are introduced via the [[Lagrangian mechanics]] approach to mechanics based upon describing a system by ''generalized coordinates'' usually denoted as {''q<sub>k</sub>''}. The only requirement on these coordinates is that they are necessary and sufficient to uniquely characterize the state of the system: they need not be (although they could be) the coordinates of the particles in the system. Instead, they could be the angles and extensions of links in a robot arm, for instance. If a mechanical system consists of ''N'' particles and there are ''m'' independent kinematical conditions imposed, it is possible to characterize the system uniquely by ''n'' = 3''N - m'' independent [[generalized coordinates]] {''q<sub>k</sub>''}.<ref name=Lanczos3>{{cite book |title=The Variational Principles of Mechanics |author =Cornelius Lanczos |page=10 |isbn=0-486-65067-7 |year=1986 |url=http://books.google.com/books?id=ZWoYYr8wk2IC&pg=PR4&dq=isbn:0486650677&sig=ACfU3U2R5sLjGS22S-h8Z_j9RiPJnKcKZg#PPA7,M1 |publisher=Dover Publications |edition=1970 reprint of 4th}}</ref>

In classical mechanics, the Lagrangian is defined as the [[kinetic energy]], <math>T</math>, of the system minus its [[potential energy]], <math>U</math>.<ref name=Lanczos4>{{cite book |title=The Variational Principles of Mechanics |author =Cornelius Lanczos |pages=112–113 |isbn=0-486-65067-7 |year=1986 |url=http://books.google.com/books?id=ZWoYYr8wk2IC&pg=PR4&dq=isbn:0486650677&sig=ACfU3U2R5sLjGS22S-h8Z_j9RiPJnKcKZg#PPA7,M1 |publisher=Dover Publications |edition=Reprint of 1970 4th}}</ref> In symbols,

:<math>L = T - U.\quad</math>

Under conditions that are given in [[Lagrangian mechanics]], if the Lagrangian of a system is known, then the [[equation of motion|equations of motion]] of the system may be obtained by a direct substitution of the expression for the Lagrangian into the [[Euler–Lagrange equation]], a particular family of [[partial differential equation]]s.

Here are some definitions:<ref name=Lagrangian>{{cite book |title= Mathematical Methods of Classical Mechanics |author=Vladimir Igorevich Arnolʹd |url=http://books.google.com/books?id=Pd8-s6rOt_cC&pg=PA129&dq=%22additional+terms+called+inertial+forces.+This+allows+us+to+detect+experimentally%22&lr=&as_brr=0&sig=ACfU3U3k_JqejV-asMO-2LKNELQKDVjY7Q#PPA60,M1 |page=60 |isbn=0-387-96890-3 |publisher=Springer |year=1989}}</ref>

:'''Definition''':
::<math>L(\boldsymbol{q},\  \boldsymbol {\dot{q}},\  t)= T-U</math>
:is the ''Lagrange function'' or ''Lagrangian'', ''q<sub>i</sub>'' are the ''generalized coordinates'', <math>\dot{q_i}</math> are ''generalized velocities'',
::<math>\partial L / \partial \dot{q_i} </math> &ensp; are ''generalized momenta'',
::<math>\partial L/\partial q_i </math> &ensp; are ''generalized forces'',
::<math>\frac{d}{dt} \frac{\partial L}{\partial \dot{q_i}} -\frac {\partial L}{\partial q_i} = 0 </math> &ensp; are ''Lagrange's equations''.

It is not the purpose here to outline how Lagrangian mechanics works. The interested reader can look at other articles explaining this approach. For the moment, the goal is simply to show that  the Lagrangian approach can lead to "generalized fictitious forces" that ''do not vanish in inertial frames''. What is pertinent here is that in the case of a single particle, the Lagrangian approach can be arranged to capture exactly the "coordinate" fictitious forces just introduced.

To proceed, consider a single particle, and introduce the generalized coordinates as {''q<sub>k</sub>''} = (''r, θ''). Then Hildebrand <ref name=Hildebrand/> shows in polar coordinates with the ''q<sub>k</sub>'' = ''(r, θ)'' the "generalized momenta" are:
::<math> p_r = m \dot r \ , \ p_{\theta} = mr^2 \dot{\theta}\ , </math>
leading, for example, to the generalized force:
::<math>\frac{d}{dt}p_r =Q_r + mr{\dot{ \theta}}^2 \ , </math>
with ''Q<sub>r</sub>'' the impressed radial force. The connection between "generalized forces" and Newtonian forces varies with the choice of coordinates. This Lagrangian formulation introduces exactly the "coordinate" form of fictitious forces mentioned above that allows "fictitious" (generalized) forces in inertial frames, for example, the term <span style="vertical-align:20%;"><math>mr { \dot{\theta}}^2 \ . </math></span> Careful reading of Hildebrand shows he doesn't discuss the role of "inertial frames of reference", and in fact, says "[The] presence or absence [of inertia forces] depends, not upon the particular problem at hand but ''upon the coordinate system chosen''." By coordinate system presumably is meant the choice of {''q<sub>k</sub>''}. Later he says "If ''accelerations'' associated with generalized coordinates are to be of prime interest (as is usually the case), the [nonaccelerational] terms may be conveniently transferred to the right … and considered as additional (generalized) inertia forces. Such inertia forces are often said to be of the ''Coriolis'' type."

In short, the emphasis of some authors upon coordinates and their derivatives and their introduction of (generalized) fictitious forces that do not vanish in inertial frames of reference is an outgrowth of the use of [[generalized coordinates]] in [[Lagrangian mechanics]]. For example, see McQuarrie<ref name=McQuarrie>

{{cite book |author=Donald Allan McQuarrie |title=Statistical Mechanics |pages=5–6 |url=http://books.google.com/books?id=itcpPnDnJM0C&pg=PA5&dq=centrifugal+%22polar+coordinates%22&lr=&as_brr=0&sig=ACfU3U3i8xqTmx894j9QhQagOncOyBPWWA#PPA5,M1
|isbn=1-891389-15-7 |year=2000 |publisher=University Science Books }}

</ref> Hildebrand,<ref name=Hildebrand/> and von Schwerin.<ref name=Schwerin>

{{cite book |title=Multibody system simulation: numerical methods, algorithms, and software |author=Reinhold von Schwerin |url=http://books.google.com/books?id=Vy5dxkgPjNUC&pg=PA24 |page=24 |isbn=3-540-65662-6 |publisher=Springer |year=1999}}

</ref> Below is an example of this usage as employed in the design of robotic manipulators:<ref name=Eberhard>

{{cite book |title=Automatic Differentiation of Algorithms: From Simulation to Optimization |page=131 |author=George F. Corliss, Christele Faure, Andreas Griewank, Laurent Hascoet (editors) |url=http://books.google.com/books?id=z3nZ62xY43QC&pg=PA131&dq=centrifugal+generalized&lr=&as_brr=0&sig=ACfU3U2x3lfNrJyiJ4121VgAzh4bmb_xPA |isbn=0-387-95305-1 |publisher=Springer |year=2002  }}

</ref><ref name= Henninger>

{{cite book |title=Advances in Computational Multibody Systems |page = 322 |author= Jorge A. C. Ambrósio (editor) |isbn=1-4020-3392-3 |publisher=Springer |year=2003 |url=http://books.google.com/books?id=Jv6e3oxkI6YC&pg=PA322&dq=centrifugal+generalized&lr=&as_brr=0&sig=ACfU3U3Ho22GpT7PLsFsmy--WsgdxauPgg  }}

</ref><ref name=Ge>

{{cite book |title=Adaptive Neural Network Control of Robotic Manipulators |author=Shuzhi S. Ge, Tong Heng Lee, Christopher John Harris |isbn=981-02-3452-X |publisher=World Scientific |year=1998 |pages=47–48 |url=http://books.google.com/books?id=cdBENqlY_ucC&printsec=frontcover&dq=CHristoffel+centrifugal&lr=&as_brr=0#PPA47,M1 }}

</ref>
{{Quotation|In the above [Lagrange-Euler] equations, there are three types of terms. The first involves the second derivative of the generalized co-ordinates. The second is quadratic in <math>\mathbf{\dot q}</math> where the coefficients may depend on <math>\mathbf{q}</math>. These are further classified into two types. Terms involving a product of the type <math>{\dot q_i}^2</math> are called ''centrifugal forces'' while those involving a product of the type <math>\dot q_i \dot q_j</math> for ''i ≠ j'' are called ''Coriolis forces''. The third type is functions of <math>\mathbf{q}</math> only and are called ''gravitational forces''.|Shuzhi S. Ge, Tong Heng Lee & Christopher John Harris: ''Adaptive Neural Network Control of Robotic Manipulators'', pp. 47-48}}

For a robot manipulator, the equations may be written in a form using [[Christoffel symbols]] ''Γ<sub>ijk</sub>'' (discussed further below) as:<ref name= Murray>

{{cite book |title =A mathematical introduction to robotic manipulation |url=http://books.google.com/books?id=D_PqGKRo7oIC&printsec=frontcover&source=gbs_summary_r&cad=0#PPA170,M1 |page=170 |author=Richard M. Murray, Zexiang Li, S. Shankar Sastry |year=1994 |publisher=CRC Press |isbn=0-8493-7981-4}}

</ref><ref name=Siciliano>

{{cite book |title=Modelling and control of robot manipulators |author=Lorenzo Sciavicco, Bruno Siciliano |url=http://books.google.com/books?id=v9PLbcYd9aUC&pg=PA142 |pages=142 ''ff'' |isbn=1-85233-221-2 |publisher=Springer |edition=2 |year=2000}}

</ref>

:<math>\sum_{j=1}^n \ M_{ij}(\boldsymbol q ) \ddot q_j + \sum_               {j,k=1}^n \Gamma_{ijk}\dot q_j \dot q_k +\frac{\partial V}{\partial q_i} =\Upsilon_i \ ; i= 1, ... , n \ , </math>

where ''M'' is the "manipulator inertia matrix" and ''V'' is the potential energy due to gravity (for example), and <math>\Upsilon_i</math> are the generalized forces on joint ''i''. The terms involving Christoffel symbols therefore determine the "generalized centrifugal" and "generalized Coriolis" terms.

The introduction of ''generalized'' fictitious forces often is done without notification and without specifying the word "generalized".  This sloppy use of terminology leads to endless confusion because these ''generalized'' fictitious forces, unlike the standard "state-of-motion" fictitious forces, do not vanish in inertial frames of reference.

===Polar coordinates in an inertial frame of reference===
Below, the acceleration of a particle is derived as seen in an inertial frame using polar coordinates. There are no "state-of-motion" fictitious forces in an inertial frame, by definition. Following that presentation, the contrasting terminology of "coordinate" fictitious forces is presented and critiqued on the basis of the non-vectorial transformation behavior of these "forces".

In an inertial frame, let <math>\mathbf{r}</math> be the position vector of a moving particle. Its Cartesian components (''x'', ''y'') are:
:<math>\mathbf{r} =(r\cos\theta,\  r\sin\theta)\ ,</math>

with polar coordinates ''r'' and  θ depending on time ''t''.

Unit vectors are defined in the radially outward direction <math>\mathbf{r}</math>: 
:<math>\hat{\boldsymbol{r}} = \frac{ \partial \mathbf{r}}{ \partial r} =  (\cos\theta,\ \sin\theta)</math>

and in the direction at right angles to <math>\mathbf{r}</math>:
:<math>\hat{\boldsymbol\theta} =\frac{\partial^2 {\mathbf{r}}}{\partial r \, \partial \theta}= (-\sin\theta\ ,\cos\theta) \ .</math>

These unit vectors vary in direction with time:
:<math>\frac{d}{dt}\hat{\boldsymbol{r}} = (-\sin\theta,\ \cos\theta)\frac{d \theta}{dt} = \frac{d \theta}{dt}\hat{\boldsymbol\theta} , </math>
and:
:<math>\frac{d}{dt}\hat{\boldsymbol{\theta}} = (-\cos\theta,\ -\sin\theta)\frac{d \theta}{dt} =- \frac{d \theta}{dt}\hat{\boldsymbol r} . </math>

Using these derivatives, the first and second derivatives of position are:

:<math>\boldsymbol{v} =\frac{d\mathbf{r}}{dt} = \dot r\hat{\boldsymbol{r}} + r\dot\theta\hat{\boldsymbol\theta},</math>

:<math>\boldsymbol{a} = \frac{d\boldsymbol{v}}{dt} =\frac{d^2\mathbf{r}}{dt^2} = (\ddot r - r\dot\theta^2)\hat{\boldsymbol{r}} + (r\ddot\theta + 2\dot r \dot\theta)\hat{\boldsymbol\theta} \ , </math>
where dot-overmarkings indicate time differentiation. With this form for the acceleration <math>\boldsymbol{a}</math>, in an inertial frame of reference Newton's second law expressed in polar coordinates is:
:<math>\boldsymbol{F} = m \boldsymbol{a} = m(\ddot r - r\dot\theta^2)\hat{\boldsymbol{r}} + m(r\ddot\theta + 2\dot r \dot\theta)\hat{\boldsymbol\theta} \ , </math>
where ''' ''F'' ''' is the net real force on the particle. No fictitious forces appear because all fictitious forces are zero by definition in an inertial frame.

From a mathematical standpoint, however, it sometimes is handy to put only the second-order derivatives on the right side of this equation; that is we write the above equation by rearrangement of terms as:
:<math>\boldsymbol{F} +m r\dot\theta^2\hat{\mathbf{r}} - m 2\dot r \dot\theta\hat{\boldsymbol\theta} = m \tilde{\boldsymbol{a}}= m\ddot r \hat{\boldsymbol{r}} +m r\ddot\theta\hat{\boldsymbol\theta} \ , </math>
where a "coordinate" version of the "acceleration" is introduced:
:<math> \tilde{\boldsymbol{a}}= \ddot r \hat{\boldsymbol{r}} + r\ddot\theta\hat{\boldsymbol\theta} \ , </math>
consisting of only second-order time derivatives of the coordinates ''r'' and θ. The terms moved to the force-side of the equation are now treated as ''extra'' "fictitious forces" and, confusingly, the resulting forces also are called the "centrifugal" and "Coriolis" force.

These newly defined "forces" are non-zero in an ''inertial frame'', and so certainly are not the same as the previously identified fictitious forces that are zero in an inertial frame and non-zero only in a non-inertial frame.<ref name=Stommer4>For a treatment using these terms as fictitious forces, see {{cite book |title=An Introduction to the Coriolis Force |author=Henry Stommel, Dennis W. Moore |page=36 |url=http://books.google.com/books?id=-JQx_t3yGB4C&pg=PA36&dq=%22acceleration+terms+on+the+righthand%22&lr=&as_brr=0&sig=ACfU3U2TxfwVuND0hVjSKzIEdo9w81diQQ
|isbn=0-231-06636-8}}</ref> In this article, these newly defined forces are called the "coordinate" centrifugal force and the "coordinate" Coriolis force to separate them from the "state-of-motion" forces.

[[File:Displaced polar coordinates.JPG|thumb |200px |Figure 2: Two coordinate systems differing by a displacement of origin. Radial motion with constant velocity '''''v''''' in one frame is not radial in the other frame. Angular rate <span style="vertical-align:+20%;"><math>\dot \theta=0</math></span>, but   <span style="vertical-align:+15%;"><math>\dot \theta ' \ne 0 \ .</math></span>]]

==== Change of origin ====

Here is an illustration showing the so-called "centrifugal term"  <span style="vertical-align:+20%;"><math>r\dot\theta^2</math></span> does not transform as a true force, putting any reference to this term not just as a "term", but as a centrifugal ''force'', in a dubious light. Suppose in frame ''S'' a particle moves radially away from the origin at a constant velocity. See Figure 2. The force on the particle is zero by Newton's first law. Now we look at the same thing from frame ''S' '', which is the same, but displaced in origin. In ''S' '' the particle still is in straight line motion at constant speed, so again the force is zero.

What if we use polar coordinates in the two frames? In frame ''S'' the radial motion is constant and there is no angular motion. Hence, the acceleration is:
:::<math>\boldsymbol a  = \left(\ddot r -r {\dot \theta}^2 \right ) \hat{ \boldsymbol r} + \left(r \ddot \theta +2 \dot r \dot \theta \right) \hat {\boldsymbol \theta} = 0\ ,</math>
and each term individually is zero because <span style="vertical-align:+15%;"><math>\dot \theta = 0, \ \ddot \theta =0</math></span> and <span style="vertical-align:+15%;"><math>\ddot r =0 \ </math></span>. There is no force, including no <span style="vertical-align:+22%;"><math>r\dot\theta^2</math></span> "force" in frame ''S''.
In frame ''S' '', however, we have:
:::<math>\boldsymbol a '   = \left( \ddot {r } ' -r '   \dot {\theta } ' ^2 \right)  \hat { \boldsymbol r } ' + \left( r ' \ddot \theta ' +2 \dot r ' \dot \theta ' \right) \hat {\boldsymbol \theta } ' \ </math>
In this case the azimuthal term is zero, being the rate of change of angular momentum. To obtain zero acceleration in the radial direction, however, we require:
:::<math>\ddot r '= r ' \dot {\theta}' ^2 \ . </math>
The right-hand side is non-zero, inasmuch as neither <span style="vertical-align:+15%;"><math>r'\ </math></span> nor <span style="vertical-align:+20%;"><math>\dot \theta'</math></span> is zero. That is, we cannot obtain zero force (zero <span style="vertical-align:+15%;"><math>\boldsymbol a '\ </math></span>) if we retain only <span style="vertical-align:+20%;"><math>\ddot r'</math></span> as the acceleration; we need both terms.

Despite the above facts, suppose we adopt polar coordinates, and wish to say that <span style="vertical-align:+20%;"><math>r\dot\theta^2</math></span> is "centrifugal force", and reinterpret <span style="vertical-align:+10%;"><math>\ddot r</math></span> as "acceleration" (without dwelling upon any possible justification). How does this decision fare when we consider that a proper formulation of physics is geometry and coordinate-independent? See the article on [[general covariance]].<ref name=Atmanspacher>For a rather abstract but complete discussion, see {{cite book |title=Recasting Reality: Wolfgang Pauli's Philosophical Ideas and Contemporary Science |author=Harald Atmanspacher & Hans Primas |page=§2.2, p. 42 ''ff'' |url=http://books.google.com/books?id=v_YOBo-lMS8C&pg=PA57&dq=equivalence+%22covariant+law%22&lr=&as_brr=0#PPA43,M1 |isbn=3-540-85197-6 |publisher=Springer |year=2008}}</ref> To attempt to form a covariant expression, this so-called centrifugal "force" can be put into vector notation as:

:<math>\boldsymbol{F_{\dot \theta}} = -\boldsymbol {\omega \times}\left(\boldsymbol{\omega \times r }\right)\ ,</math>

with:

:<math>\boldsymbol \omega =  \dot \theta  \boldsymbol{\hat k} \ ,</math>

and <span style="vertical-align:+15%;"><math>\boldsymbol{\hat k}</math></span> a unit vector normal to the plane of motion. Unfortunately, although this expression formally looks like a vector, when an observer changes origin the value of <span style="vertical-align:+15%;"><math>\dot \theta</math></span> changes (see Figure 2), so observers in the same frame of reference standing on different street corners see different "forces" even though the actual events they witness are identical.
How can a physical force (be it fictitious or real) be zero in one frame ''S'', but non-zero in another frame ''S' '' identical, but a few feet away?  Even for exactly the same particle behavior the expression <span style="vertical-align:+20%;"><math>r\dot\theta^2</math></span> is different in every frame of reference, even for very trivial distinctions between frames. In short, if we take <span style="vertical-align:+20%;"><math>r\dot\theta^2</math></span> as "centrifugal force", it does not have a universal significance: it is ''unphysical''.

Beyond this problem, the real impressed net force is zero. (There is no real impressed force in straight-line motion at constant speed). If we adopt polar coordinates, and wish to say that <span style="vertical-align:+20%;"><math>r\dot\theta^2</math></span> is "centrifugal force", and reinterpret <span style="vertical-align:+10%;"><math>\ddot r</math></span> as "acceleration", the oddity results in frame ''S' '' that [[straight-line motion]] at constant speed requires a net force in polar coordinates, but not in Cartesian coordinates. Moreover, this perplexity applies in frame ''S''{{'}}{{Clarify|date=November 2013|reason=Should this be a Prime (symbol) instead of an apostrophe?}}, but not in frame ''S''.

The absurdity of the behavior of <span style="vertical-align:+20%;"><math>r\dot\theta^2</math></span> indicates that one must say that  <span style="vertical-align:+20%;"><math>r\dot\theta^2</math></span> is ''not'' centrifugal ''force'', but simply one of two ''terms'' in the acceleration. This view, that the acceleration is composed of two terms, is frame-independent: there is zero centrifugal force in any and every inertial frame. It also is coordinate-system independent: we can use Cartesian, polar, or any other curvilinear system: they all produce zero.

Apart from the above physical arguments, of course, the derivation above, based upon application of the mathematical rules of differentiation, shows the radial acceleration does indeed consist of the two terms <span style="vertical-align:+20%;"><math>\ddot r -r\dot\theta^2</math></span>.

That said, the next subsection shows  there is a connection between these centrifugal and Coriolis ''terms'' and the fictitious ''forces'' that pertain to a particular ''rotating'' frame of reference (as distinct from an inertial frame).

{{anchor|Figure 3}}
[[File:Co-rotating frame.PNG|thumb |300px |Figure 3: Inertial frame of reference ''S'' and instantaneous non-inertial ''co-rotating'' frame of reference ''S' ''. The co-rotating frame rotates at angular rate &Omega; equal to the rate of rotation of the particle about the origin of '' S' '' at the particular moment ''t''. Particle is located at vector position '''r'''''(t)'' and unit vectors are shown in the radial direction to the particle from the origin, and also in the direction of increasing angle &theta; normal to the radial direction. These unit vectors ''need not'' be related to the tangent and normal to the path. Also, the radial distance ''r'' ''need not'' be related to the radius of curvature of the path.]]

===Co-rotating frame===
In the case of planar motion of a particle, the "coordinate" centrifugal and Coriolis acceleration terms found above to be non-zero in an inertial frame can be shown to be the negatives of the "state-of-motion" centrifugal and Coriolis terms that appear in a very particular non-inertial ''co-rotating'' frame (see next subsection).<ref name=Taylor40>For the following discussion, see {{cite book |url=http://books.google.com/books?as_q=&num=10&btnG=Google+Search&as_epq=shares+the+same+origin+O+and+is+rotating&as_oq=&as_eq=&as_brr=0&lr=&as_vt=&as_auth=&as_pub=&as_sub=&as_drrb=c&as_miny=&as_maxy=&as_isbn= |author=John R Taylor |title=Classical Mechanics |quote=At the chosen instant ''t<sub>0</sub>'', the frame ''S' '' and the particle are rotating at the same rate....In the inertial frame, the forces are simpler (no "fictitious" forces) but the accelerations are more complicated.; in the rotating frame, it is the other way round. |page=§9.10, pp. 358–359 |isbn=1-891389-22-X |publisher=University Science Books |year=2005}}</ref> See [[#Figure 3|Figure 3]]. To define a co-rotating frame, first an origin is selected from which the distance ''r(t)'' to the particle is defined. An axis of rotation is set up that is perpendicular to the plane of motion of the particle, and passing through this origin. Then, at the selected moment ''t'', the rate of rotation of the co-rotating frame Ω is made to match the rate of rotation of the particle about this axis, ''dθ/dt''. The co-rotating frame applies only for a moment, and must be continuously re-selected as the particle moves. For more detail, see [[Polar coordinate system#Centrifugal and Coriolis terms|Polar coordinates, centrifugal and Coriolis terms]].

===Polar coordinates in a rotating frame of reference===
Next, the same approach is used to find the fictitious forces of a (non-inertial) rotating frame. For example, if a rotating polar coordinate system is adopted for use in a rotating frame of observation, both rotating at the same constant counterclockwise rate Ω, we find the equations of motion in this frame as follows: the radial coordinate in the rotating frame is taken as ''r'', but the angle θ' in the rotating frame changes with time:
:<math>\theta ' = \theta - \Omega t \ . </math>
Consequently,
:<math>\dot\theta ' = \dot\theta  - \Omega \ . </math>
Plugging this result into the acceleration using the unit vectors of the previous section:
:<math>\frac{d^2\mathbf{r}}{dt^2} = \left( \ddot r - r \left( \dot\theta ' +\Omega\right) ^2 \right) \hat{\mathbf{r}} + \left( r\ddot\theta ' + 2\dot r \left(\dot\theta ' + \Omega \right) \right)\hat{\boldsymbol\theta}</math>
::<math>=(\ddot r - r\dot\theta '^2)\hat{\mathbf{r}} + (r\ddot\theta' + 2\dot r \dot\theta ')\hat{\boldsymbol\theta} - \left( 2 r \Omega \dot\theta ' + r \Omega^2 \right)\hat{\mathbf{r}} + \left( 2 \dot r  \Omega \right)  \hat{\boldsymbol\theta} \ .  </math>
The leading two terms are the same form as those in the inertial frame, and they are the only terms if the frame is ''not'' rotating, that is, if Ω=0. However, in this rotating frame we have the extra terms:<ref name=Stommel5>{{cite book |title=An Introduction to the Coriolis Force |author=Henry Stommel & Dennis W. Moore |year=1989 |isbn=0-231-06636-8 |url=http://books.google.com/books?id=-JQx_t3yGB4C&pg=PA55&dq=%22an+additional+centrifugal+%22force%22%22&lr=&as_brr=0&sig=ACfU3U2rCWI1cSoAXXliJk_WyJxH8fQiSA |page=55 }}</ref>

:<math>- \left( 2 r \Omega \dot\theta ' + r \Omega^2 \right)\hat{\mathbf{r}} + \left( 2 \dot r  \Omega \right)  \hat{\boldsymbol\theta}  </math>
The radial term Ω<sup>2</sup> ''r'' is the centrifugal force per unit mass due to the system's rotation at rate Ω and the radial term <span style="vertical-align:20%;"><math>2 r \Omega \dot\theta '</math></span> is the radial component of the Coriolis force per unit mass, where <span style="vertical-align:20%;"><math>r \dot\theta '</math></span> is the tangential component of the particle velocity as seen in the rotating frame. The term <span style="vertical-align:10%;"><math>- \left( 2 \dot r  \Omega \right)  \hat{\boldsymbol\theta}  </math></span> is the so-called ''azimuthal'' component of the Coriolis force per unit mass. In fact, these extra terms can be used to ''measure'' Ω and provide a test to see whether or not the frame is rotating, just as explained in the example of [[Rotating spheres|rotating identical spheres]]. If the particle's motion can be described by the observer using Newton's laws of motion ''without'' these Ω-dependent terms, the observer is in an [[inertial frame of reference]] where Ω=0.

These "extra terms" in the acceleration of the particle are the "state of motion" fictitious forces for this rotating frame, the forces introduced by rotation of the frame at angular rate Ω.<ref name=Stommel2>This derivation can be found in {{cite book |title=An Introduction to the Coriolis Force |author=Henry Stommel, Dennis W. Moore |page= Chapter III, pp. 54 ''ff'' |url=http://books.google.com/books?id=-JQx_t3yGB4C&printsec=frontcover&dq=coriolis+inauthor:Stommel&lr=&as_brr=0&sig=ACfU3U0gX4wrzVzo7bwD7I8HJ_bd24e2Rg#PPA54,M1}}</ref>

In this rotating frame, what are the "coordinate" fictitious forces? As before, suppose we choose to put only the second-order time derivatives on the right side of Newton's law:
:<math>\boldsymbol{F} +m r\dot\theta '^2\hat{\mathbf{r}} -m 2\dot r \dot\theta '\hat{\boldsymbol\theta} +m \left( 2 r \Omega \dot\theta ' + r \Omega^2 \right)\hat{\mathbf{r}} - m\left( 2 \dot r  \Omega \right)  \hat{\boldsymbol\theta} </math>&ensp;<math>= m\ddot r\hat{\mathbf{r}}+ m r\ddot\theta'\ \hat{\boldsymbol\theta} </math>&ensp;<math>= m\tilde{\boldsymbol{a} }   </math>

If we choose for convenience to treat <span style="vertical-align:10%;"><math> \tilde{\boldsymbol{a}}</math></span> as some so-called "acceleration", then the terms <span style="vertical-align:10%;"><math> (  m r\dot\theta '^2\hat{\mathbf{r}} -m 2\dot r \dot\theta '\hat{\boldsymbol\theta})</math></span> are added to the so-called "fictitious force", which are not "state-of-motion" fictitious forces, but are actually components of force that persist even when Ω=0, that is, they persist even in an inertial frame of reference. Because these extra terms are added, the "coordinate" fictitious force is not the same as the "state-of-motion" fictitious force. Because of these extra terms, the "coordinate" fictitious force is not zero even in an inertial frame of reference.

====More on the co-rotating frame====
Notice however, the case of a rotating frame that happens to have the same angular rate as the particle, so that Ω = ''dθ/dt'' at some particular moment (that is, the polar coordinates are set up in the instantaneous, non-inertial co-rotating frame of [[#Figure 3|Figure 3]]). In this case, at this moment, ''dθ'/dt = 0''. In this co-rotating non-inertial frame at this moment the "coordinate" fictitious forces are only those due to the motion of the frame, that is, they are the same as the "state-of-motion" fictitious forces, as discussed in the remarks about the co-rotating frame of [[#Figure 3|Figure 3]] in the previous section.

==Fictitious forces in curvilinear coordinates==
{{see also|Curvilinear coordinate system|Covariant derivative}}
[[File:General curvilinear coordinates 1.svg|thumb|350px|Figure 4: Coordinate surfaces, coordinate lines, and coordinate axes of general curvilinear coordinates.]]
To quote Bullo and Lewis: "Only in exceptional circumstances can the configuration of Lagrangian system be described by a vector in a vector space. In the natural mathematical setting, the system's configuration space is described loosely as a curved space, or more accurately as a [[differentiable manifold]]."<ref name=Bullo>{{cite book |title=Geometric Control of Mechanical Systems |author=Francesco Bullo, Andrew D. Lewis |publisher= Springer |year=2005 |isbn=0-387-22195-6 |page=3 |url=http://books.google.com/books?id=jg7VumxOoe4C&pg=PA186&dq=Coriolis+%22polar+coordinates%22&lr=&as_brr=0#PPA3,M1}}</ref>

Instead of [[Cartesian coordinates]], when equations of motion are expressed in a [[curvilinear coordinates|curvilinear coordinate]] system, [[Christoffel symbol]]s appear in the acceleration of a particle expressed in this coordinate system, as described below in more detail. Consider description of a particle motion from the viewpoint of an ''inertial frame of reference'' in curvilinear coordinates. Suppose the position of a point ''P'' in Cartesian coordinates is (''x'', ''y'', ''z'') and in curvilinear coordinates is (''q<sub>1</sub>'', ''q<sub>2</sub>''. ''q<sub>3</sub>''). Then functions exist that relate these descriptions:
:<math>x = x(q_1,\ q_2,\ q_3)\ ;</math>&ensp;<math>\ q_1 = q_1(x,\ y, \ z) \ , </math>
and so forth. (The number of dimensions may be larger than three.) An important aspect of such coordinate systems is the element of arc length that allows distances to be determined. If the curvilinear coordinates form an [[orthogonal coordinates|orthogonal coordinate]] system, the element of arc length ''ds'' is expressed as:
:<math>ds^2 = \sum_{k=1}^{d} \left( h_{k}\right)^{2} \left( dq_{k} \right)^{2} \ ,  </math>
where the quantities ''h<sub>k</sub>'' are called ''scale factors''.<ref name =Feshbach>{{cite book |title=Methods of Mathematical Physics |author=PM Morse & H Feshbach |publisher=McGraw Hill |page=25 |edition =First Edition |year=1953}}</ref> A change ''dq<sub>k</sub>'' in ''q<sub>k</sub>'' causes a displacement ''h<sub>k</sub> dq<sub>k</sub>'' along the coordinate line for ''q<sub>k</sub>''. At a point ''P'', we place unit vectors '''e<sub>k</sub>'''  each tangent to a coordinate line of a variable ''q<sub>k</sub>''. Then any vector can be expressed in terms of these basis vectors, for example, from an inertial frame of reference, the position vector of a moving particle '''r''' located at time ''t'' at position ''P'' becomes:
:<math> \boldsymbol{r} =\sum_{k=1}^{d} q_k \  \boldsymbol{e_k} \, </math>
where ''q<sub>k</sub>'' is the vector [[dot product]] of '''r''' and '''e<sub>k</sub>'''.
The velocity '''v''' of a particle at ''P'', can be expressed at ''P'' as:
:<math> \boldsymbol{v} =\sum_{k=1}^{d} v_k \  \boldsymbol{e_k} \, </math>
::<math>=\frac{d}{dt}\boldsymbol {r} =\sum_{k=1}^{d} \dot q_k \  \boldsymbol{e_k} + \sum_{k=1}^{d} q_k \  \dot{\boldsymbol{e_k}}  \, </math>
where ''v<sub>k</sub>'' is the vector [[dot product]] of '''v''' and '''e<sub>k</sub>''', and over dots indicate time differentiation.
The time derivatives of the basis vectors can be expressed in terms of the scale factors introduced above. for example:
:<math>\frac{\partial}{\partial q_2} \boldsymbol {e_1} = -\boldsymbol{e}_2 \frac{1}{h_2}\frac{\partial h_1}{\partial q_2} -\boldsymbol{e}_3 \frac{1}{h_3}\frac{\partial h_1}{\partial q_3} \ ,</math> &ensp;or, in general, &ensp; <math> \frac { \partial \boldsymbol{e_j} } { \partial q_k} = \sum_{n=1}^{d} {\Gamma^n}_{kj}\boldsymbol{e_n} \ , </math>
in which the coefficients of the unit vectors are the [[Christoffel symbols]] for the coordinate system. The general notation and formulas for the Christoffel symbols are:<ref name =Feshbach2>{{cite book |title=Methods of Mathematical Physics |author=PM Morse & H Feshbach |publisher=McGraw Hill |pages=47–48 |edition =First Edition |year=1953}}</ref><ref name=Liu>{{cite book |title=Continuum mechanics |author=I-Shih Liu |page= Appendix A2 |url=http://books.google.com/books?id=-gWqM4uMV6wC&pg=PT307&dq=CHristoffel+centrifugal&lr=&as_brr=0&sig=ACfU3U1dNjYh273fApEPFhrIf5Y2r7_e4Q#PPT291,M1
|isbn=3-540-43019-9 |publisher=Springer |year=2002}}</ref>
:<math>{\Gamma^i}_{ii}=\begin{Bmatrix}
 \,i\,\\
 i\,\,i
\end{Bmatrix} = \frac{1}{h_i}\frac{\partial h_i}{\partial q_i}\! \ ;\ </math>&ensp;<math>{\Gamma^i}_{ij}=\ \begin{Bmatrix}
 \,i\,\\
 i\,\,j
\end{Bmatrix} = \frac{1}{h_i}\frac{\partial h_i}{\partial q_j}= \begin{Bmatrix}
 \,i\,\\
 j\,\,i
\end{Bmatrix}\! \ ;\ </math>&ensp;<math>{\Gamma^j}_{ii}=\begin{Bmatrix}
\,j\,\\
 i\,\,i
\end{Bmatrix} = -\frac{h_i}{{h_j}^2}\frac{\partial h_i}{\partial q_j} \ ,
</math>
and the symbol is zero when all the indices are different. Despite appearances to the contrary, the Christoffel symbols ''do not form the components of a tensor''. For example, they are zero in Cartesian coordinates, but not in polar coordinates.<ref name=Riley>{{cite book |title=Mathematical Methods for Physics and Engineering |page=965 |url=http://books.google.com/books?id=Mq1nlEKhNcsC&pg=PA965&dq=tensor+%22Christoffel+symbol%22&lr=&as_brr=0 |author=K. F. Riley, M. P. Hobson, S. J. Bence |publisher=Cambridge University Press |year=2006 |isbn=0-521-86153-5 }}</ref>

Using relations like this one,<ref name=Synge>{{cite book |title=Tensor Calculus |author=JL Synge & A Schild |page=52 |url=http://books.google.com/books?id=SjKoMuMdB4oC&pg=RA1-PA52&dq=tensor+%22Christoffel+symbol%22&lr=&as_brr=0#PRA1-PA52,M1  |isbn= 0-486-63612-7 |publisher=Courier Dover Publications |year=1978 |edition=Reprint of 1969 edition}}</ref>
:<math>\dot{\boldsymbol{e_j}} =\sum_{k=1}^{d}\frac {\partial}{\partial q_k}\boldsymbol{e_j}\dot q_k \   </math>
::<math>=\sum_{k=1}^{d} \sum_{i=1}^{d} {\Gamma^k}_{ij}\dot q_i \boldsymbol{e_k}\ ,</math>
which allows all the time derivatives to be evaluated. For example, for the velocity:
:<math> \boldsymbol{v} =\frac{d}{dt}\boldsymbol {r} =\sum_{k=1}^{d} \dot q_k \  \boldsymbol{e_k} + \sum_{k=1}^{d} q_k \  \dot{\boldsymbol{e_k}}   </math>
::<math>=\sum_{k=1}^{d} \dot q_k \  \boldsymbol{e_k} + \sum_{j=1}^{d} q_j \  \dot{\boldsymbol{e_j}}  , </math>
::<math>=\sum_{k=1}^{d} \dot q_k \  \boldsymbol{e_k} + \sum_{k=1}^{d}\sum_{j=1}^{d}\sum_{i=1}^{d} q_j \  {\Gamma^k}_{ij} \boldsymbol {e_k} \dot q_i  \  </math>
::<math>=\sum_{k=1}^{d}\left( \dot q_k \  + \sum_{j=1}^{d}\sum_{i=1}^{d} q_j \  {\Gamma^k}_{ij} \dot q_i \right) \boldsymbol{e_k} \ , </math>
with the Γ-notation for the Christoffel symbols replacing the curly bracket notation.
Using the same approach, the acceleration is then
:<math>\boldsymbol{a} = \frac{d}{dt} \boldsymbol{v} = \sum_{k=1}^{d} \dot v_k \  \boldsymbol{e_k} + \sum_{k=1}^{d} v_k \  \dot{\boldsymbol{e_k}}  \ . </math>
::<math>= \sum_{k=1}^{d} \left(\dot v_k \   + \sum_{j=1}^{d} \sum_{i=1}^{d}v_j{\Gamma^k}_{ij}\dot q_i    \right)\boldsymbol{e_k}  \ . </math>
Looking at the relation for acceleration, the first summation contains the time derivatives of velocity, which would be associated with acceleration if these were Cartesian coordinates, and the second summation (the one with Christoffel symbols) contains terms related to the way the unit vectors change with time.<ref name=Silberstein2>For application of the Christoffel symbols formalism to a rotating coordinate system, see {{cite book |author=Ludwik Silberstein |title=The Theory of General Relativity and Gravitation |pages=30–32 |url=http://books.google.com/books?lr=&as_brr=0&id=C1SwFdj_kGUC&dq=CHristoffel+centrifugal&jtp=29#PRA1-PA30,M1
|publisher=D. Van Nostrand |year=1922  }}</ref>

==="State-of-motion" <span style="font-family: Calibri; font-size:109%; font-style:italic; font-weight:normal;">versus</span> "coordinate" fictitious forces===
[[#Fictitious_forces_in_polar_coordinates|Earlier]] in this article a distinction was introduced between two terminologies, the fictitious forces that vanish in an inertial frame of reference are called in this article the "state-of-motion" fictitious forces and those that originate from differentiation in a particular coordinate system are called "coordinate" fictitious forces. Using the expression for the acceleration above, Newton's law of motion in the inertial frame of reference becomes:
:<math>\boldsymbol {F} =m\boldsymbol{a} =m  \sum_{k=1}^{d} \left(\dot v_k \   + \sum_{j=1}^{d} \sum_{i=1}^{d}v_j{\Gamma^k}_{ij}\dot q_i    \right)\boldsymbol{e_k}  \ , </math>
where ''' ''F'' ''' is the net real force on the particle. No "state-of-motion" fictitious forces are present because the frame is inertial, and "state-of-motion" fictitious forces are zero in an inertial frame, by definition.

The "coordinate" approach to Newton's law above is to retain the second-order time derivatives of the coordinates {''q<sub>k</sub>''} as the only terms on the right side of this equation, motivated more by mathematical convenience than by physics. To that end, the force law can be rewritten, taking the second summation to the force-side of the equation as:
:<math>\boldsymbol {F}   -m \sum_{j=1}^{d} \sum_{i=1}^{d}v_j{\Gamma^k}_{ij}\dot q_i    \boldsymbol{e_k}  =m\tilde{\boldsymbol{a}}\ , </math>
with the convention that the "acceleration" <span style="vertical-align:10%;"><math>\tilde{\boldsymbol{a}}</math></span> is now:
:<math>\tilde{\boldsymbol{a}} = \sum_{k=1}^{d} \dot v_k\boldsymbol{e_k}  \ .</math>
In the expression above, the summation added to the force-side of the equation now is treated as if added "forces" were present. These summation terms are customarily called fictitious forces within this "coordinate" approach, although in this inertial frame of reference all "state-of-motion" fictitious forces are identically zero. Moreover, these "forces" do not transform under coordinate transformations as ''vectors''. Thus, the designation of the terms of the summation as "fictitious forces" uses this terminology for contributions that are completely different from any real force, and from the "state-of-motion" fictitious forces. What adds to this confusion is that these "coordinate" fictitious forces are divided into two groups and given the ''same names'' as the "state-of-motion" fictitious forces, that is, they are divided into "centrifugal" and "Coriolis" terms, despite their inclusion of terms that are not the "state-of-motion" centrifugal and Coriolis terms. For example, these "coordinate" centrifugal and Coriolis terms can be nonzero ''even in an inertial frame of reference'' where the "state-of-motion" centrifugal force (the subject of this article) and Coriolis force always are zero.<ref name=Silberstein>For a more extensive criticism of lumping together the two types of fictitious force, see {{cite book |author=Ludwik Silberstein |title=The Theory of General Relativity and Gravitation |page=29 |url=http://books.google.com/books?lr=&as_brr=0&id=C1SwFdj_kGUC&dq=CHristoffel+centrifugal&jtp=29#PRA1-PA29,M1
|publisher=D. Van Nostrand |year=1922  }}</ref>

If the frame is not inertial, for example, in a rotating frame of reference, the "state-of-motion" fictitious forces are included in the above "coordinate" fictitious force expression.<ref name=note>See Silberstein.</ref> Also, if the "acceleration" expressed in terms of first-order time derivatives of the velocity happens to result in terms that are ''not'' simply second-order derivatives of the coordinates {''q<sub>k</sub>''} in time, then these terms that are not second-order also are brought to the force-side of the equation and included with the fictitious forces. From the standpoint of a Lagrangian formulation, they can be called [[Generalized force|''generalized'']] fictitious forces. See Hildebrand,<ref name=Hildebrand/> for example.

Formulation of dynamics in terms of Christoffel symbols and the "coordinate" version of fictitious forces is used often in the design of [[robotics|robots]] in connection with a [[Lagrangian mechanics|Lagrangian formulation]] of the equations of motion.<ref name=Ge/><ref name=Kelly>See {{cite book |title= Control of robot manipulators in joint space |author=R. Kelly, V. Santibáñez, Antonio Loría |page= 72 |url=http://books.google.com/books?id=jfhy4ZUPuhYC&printsec=frontcover&dq=Control+of+robot+manipulators+inauthor:kelly&lr=&as_brr=0&sig=ACfU3U2W_sj1AIIM-BoXw957U3Nu1PO1Jw#PPA72,M1
|isbn=1-85233-994-2 |year=2005 |publisher=Springer  }}</ref>

==Notes and references==

{{reflist|2}}

==Further reading==
* [http://members.tripod.com/~gravitee/booki2.htm Newton's description in Principia]
* [http://www.infoplease.com/ce6/sci/A0811114.html Centrifugal reaction force] - Columbia electronic encyclopedia
* M. Alonso and E.J. Finn, ''Fundamental university physics'', Addison-Wesley
* [http://regentsprep.org/Regents/physics/phys06/bcentrif/default.htm Centripetal force] vs. [http://regentsprep.org/Regents/physics/phys06/bcentrif/centrif.htm Centrifugal force]  - from an online Regents Exam physics tutorial by the Oswego City School District
* [http://www.npl.washington.edu/av/altvw55.html Centrifugal force acts inwards near a black hole]
* [http://hyperphysics.phy-astr.gsu.edu/HBASE/corf.html#cent Centrifugal force] at the HyperPhysics concepts site
* [http://www.netsurf.com/nss/misc/centrifugal.html A list of interesting links]
*{{cite book |title=Mathematical methods for physics and engineering: A comprehensive guide |chapter=Derivatives of basis vectors and Christoffel symbols  |author=Kenneth Franklin Riley, Michael Paul Hobson, Stephen John Bence |url=http://books.google.com/books?id=9p6sUTxUoZ0C&pg=PA814 |pages=814 ''ff'' |isbn=0-521-89067-5 |publisher=Cambridge University Press |year=2002 |edition=2 }}

==External links==
* [http://mensch.org/physlets/merry.html Motion over a flat surface] Java physlet by Brian Fiedler (from School of Meteorology at the University of Oklahoma) illustrating fictitious forces. The physlet shows both the perspective as seen from a rotating and from a non-rotating point of view.
* [http://mensch.org/physlets/inosc.html Motion over a parabolic surface] Java physlet by Brian Fiedler (from School of Meteorology at the University of Oklahoma) illustrating fictitious forces. The physlet shows both the perspective as seen from a rotating and as seen from a non-rotating point of view.
* [http://www.youtube.com/watch?v=49JwbrXcPjc Animation clip] showing scenes as viewed from both an inertial frame and a rotating frame of reference, visualizing the Coriolis and centrifugal forces.
* [http://www.mathpages.com/home/kmath633/kmath633.htm Centripetal and Centrifugal Forces] at MathPages
* [http://www.bbc.co.uk/dna/h2g2/A597152 Centrifugal Force] at h2g2
* [http://math.ucr.edu/home/baez/physics/General/Centrifugal/centri.html John Baez: ''Does centrifugal force hold the Moon up?'' ]

== See also ==
{{Col-begin}}
{{Col-1-of-3}}
* [[Centrifuge#Calculating relative centrifugal force|Calculating relative centrifugal force]]
* [[Circular motion]]
* [[Coriolis effect|Coriolis force]]
* [[Coriolis effect (perception)]]
* [[Centripetal force]]
* [[Equivalence principle]]
* [[Bucket argument]]
* [[Frame of reference]]
* [[Inertial frame of reference]]
* [[Rotational motion]]
{{Col-2-of-3}}
* [[Euler force]] - a force that appears when the frame angular rotation rate varies
* [[Reactive centrifugal force]] - a force that occurs as [[Newton's 3rd law|reaction]] due to a centripetal force
* [[Fictitious force]] – a force that can be made to vanish by changing frame of reference
* [[Orthogonal coordinates]]
* [[Osculating circle]]
* [[Frenet-Serret formulas]]
* [[Statics]]
{{Col-3-of-3}}
* [[Kinetics (physics)]]
* [[Kinematics]]
* [[Applied mechanics]]
*[[Analytical mechanics]]
*[[Dynamics (physics)]]
*[[Classical mechanics]]
*[[D'Alembert's principle]]
*[[Centrifuge]]
{{col-end}}
<br>

[[Category:Fictitious forces]]
[[Category:Force]]
[[Category:Mechanics]]
[[Category:Rotation]]