|
|
| Line 1: |
Line 1: |
| {{Mechanical failure modes}}
| | Hi there. Allow me start by introducing the writer, her title is Sophia Boon but she never really liked that name. Alaska is the only place I've been residing in but now I'm contemplating other options. He functions as a bookkeeper. I am truly fond of to go to karaoke but I've been using on new things recently.<br><br>my page: real psychics; [http://www.peaceonhaiti.org/?document_srl=1795264 http://www.peaceonhaiti.org/?document_srl=1795264], |
| | |
| '''Thermal shock''' occurs when a thermal [[gradient]] causes different parts of an object to [[coefficient of thermal expansion|expand]] by different amounts. This differential expansion can be understood in terms of [[stress (physics)|stress]] or of [[Strain (materials science)|strain]], equivalently. At some point, this stress can exceed the [[tensile strength|strength]] of the material, causing a crack to form. If nothing stops this crack from propagating through the material, it will cause the object's structure to fail.
| |
| | |
| Failure due to thermal shock can be prevented by;
| |
| # Reducing the thermal gradient seen by the object, by
| |
| ## changing its temperature more slowly
| |
| ## increasing the material's thermal conductivity
| |
| # Reducing the material's coefficient of thermal expansion
| |
| # Increasing its strength
| |
| # Introducing built-in compressive stress, as for example in [[tempered glass]]
| |
| # Decreasing its [[Young's modulus]]
| |
| # Increasing its [[toughness]], by
| |
| ## crack tip blunting, i.e., [[Plasticity (physics)|plasticity]] or [[zirconia|phase transformation]]
| |
| ## crack deflection
| |
| | |
| ==Effect on materials==
| |
| | |
| [[Borosilicate glass]] is made to withstand thermal shock better than most other glass through a combination of reduced expansion coefficient and greater strength, though [[fused quartz]] outperforms it in both these respects. Some [[glass-ceramic]] materials (mostly in [[LAS glass-ceramic|LAS]] system<ref>Scott L. Swartz, ''Ceramics having negative coefficient of thermal expansion, method of making such ceramics, and parts made from such ceramics'', United States Patent 6066585</ref>) include a controlled proportion of material with a negative expansion coefficient, so that the overall coefficient can be reduced to almost exactly zero over a reasonably wide range of temperatures.
| |
| | |
| [[Reinforced carbon-carbon]] is extremely resistant to thermal shock, due to [[graphite]]'s extremely high thermal conductivity and low expansion coefficient, the high strength of [[carbon fiber]], and a reasonable ability to deflect cracks within the structure.
| |
| | |
| To measure thermal shock the [[impulse excitation technique]] proved to be a useful tool. It can be used to measure [[Young's modulus]], [[Shear modulus]], [[Poisson's ratio]] and [[damping]] coefficient in a non destructive way. The same test-piece can be measured after different thermal shock cycles and this way the deterioration in physical properties can be mapped out.
| |
| | |
| ==Relative robustness of materials==
| |
| The robustness of a material to thermal shock, or thermal shock resistance<ref>
| |
| {{cite journal
| |
| |author=T. J. Lue
| |
| |coauthors=N. A. Fleck
| |
| |title=The Thermal Shock Resistance of Solids
| |
| |journal=[[Acta Materialia]]
| |
| |volume=46
| |
| |issue=13
| |
| |pages=4755–4768
| |
| |year=1998
| |
| |url=http://www-mech.eng.cam.ac.uk/profiles/fleck/papers/96.pdf
| |
| |doi=
| |
| |bibcode =}}
| |
| </ref>
| |
| is characterized with the '''thermal shock parameter''':<ref name="ThermalShok">{{cite journal |title=Spectroscopic, optical, and thermomechanical properties of neodymium- and chromium-doped gadolinium scandium gallium garnet |author=W.F.Krupke |coauthors= M.D. Shinn, J.E. Marion, J.A. Caird, and S.E. Stokowski |journal=[[JOSAB]] |url=http://josab.osa.org/abstract.cfm?id=3938 |volume=3 |year=1986 |issue=1 |pages=102–114 |format=abstract |doi=10.1364/JOSAB.3.000102|bibcode = 1986JOSAB...3..102K }}</ref>
| |
| :<math>R_{\mathrm{T}} = \frac{k\sigma_{\mathrm{T}}(1-\nu)}{\alpha E}\,</math>,
| |
| | |
| where
| |
| * <math>k</math> is thermal conductivity,
| |
| * <math>\sigma_{\mathrm{T}}</math> is maximal tension the material can resist,
| |
| * <math>\alpha</math> is the [[thermal expansion coefficient]]
| |
| * <math>E</math> is the [[Young's modulus]], and
| |
| * <math>\nu</math> is the [[Poisson ratio]].
| |
| | |
| ==Thermal shock parameter in the physics of solid-state lasers==
| |
| | |
| The [[laser]] [[gain medium]] generates heat. This heat is drained through the [[heat sink]]. The transfer of heat occurs at a certain [[temperature gradient]].
| |
| The non-uniform [[thermal expansion]] of a bulk material causes the [[Stress (physics)|stress]] and [[tension (physics)|tension]], which may break the device even at a slow change of temperature.
| |
| (for example, [[continuous-wave operation]]). This phenomenon is also called '''thermal shock'''.
| |
| The robustness of a [[laser material]] to the thermal shock is characterized by the '''thermal shock parameter'''.
| |
| <ref name="ThermalShok"/> (see above)
| |
| | |
| Roughly, at the efficient operation of laser, the power <math>P_{\mathrm{h}}</math> of heat generated in the gain medium is proportional to the output power <math>P_{\mathrm{s}}</math> of the laser, and the coefficient <math>q</math> of proportionality can be interpreted as heat generation parameter; then, <math>P_{\mathrm{h}}=q P_{\mathrm{s}}.</math> The heat generation parameter is basically determined by the [[quantum defect]] of the [[laser action]], and one can estimate <math>q=1-\omega_{\mathrm{s}}/\omega_{\mathrm{p}}</math>, where <math>\omega_{\mathrm{p}}</math> and <math>\omega_{\mathrm{s}}</math> are frequency of the pump and that of the lasing.
| |
| | |
| Then, for the layer of the gain medium placed at the heat sink, the maximal power can be estimated as
| |
| :<math>P_{\mathrm{s, max}} = 3 \frac{R_{\mathrm{T}}}{q} \frac{L^2}{h},\,</math>
| |
| where <math>h</math> is thickness of the layer and <math>L</math> is the transversal size.
| |
| This estimate assumes the unilateral heat drain, as it takes place in the [[active mirror]]s.
| |
| For the double-side sink, the coefficient 4 should be applied.
| |
| | |
| ===Thermal loading===
| |
| The estimate above is not the only parameter which determines the limit of overheating of a gain medium.
| |
| The maximal raise <math>\Delta T</math> of temperature, at which the medium still can efficiently lase, is also important property of the laser material.
| |
| This overheating limits the maximal power with estimate
| |
| | |
| :<math>P_{\mathrm{s, max}} = 2 \frac {k \Delta T}{q} \frac{L^2}{h}\,</math>
| |
| | |
| Combination of the two estimates above of the maximal power gives the estimate
| |
| | |
| :<math>P_{\mathrm{s, max}} = R \frac{L^2}{h}\,</math>
| |
| | |
| where
| |
| | |
| :<math>
| |
| R= \textrm{min}
| |
| \left\{
| |
| \begin{array}{c}
| |
| 3 R_{\mathrm{T}}/q\\
| |
| 2 k\Delta T/q
| |
| \end{array}
| |
| \right.
| |
| </math>
| |
| | |
| [[Image:DiskLaserScalingLimit.gif|250px|right|thumb|Estimates
| |
| <ref name="kouz07">
| |
| {{cite journal
| |
| |author=D.Kouznetsov
| |
| |coauthors=J.-F.Bisson
| |
| |title=Role of the undoped cap in the scaling of a thin disk laser
| |
| |journal=[[JOSA B]]
| |
| |volume=25
| |
| |issue=3
| |
| |pages=338–345
| |
| |year=2008
| |
| |url=http://www.opticsinfobase.org/abstract.cfm?URI=josab-25-3-338
| |
| |doi=10.1364/JOSAB.25.000338
| |
| |bibcode = 2008JOSAB..25..338K }}
| |
| </ref> of maximal value of [[round-trip loss|loss]] <math>\beta</math>, at which desirable output power <math>P</math> is still available in a single disk laser, versus normalized power
| |
| <math>s=\frac{\omega_{\rm p}}{\omega_{\rm s}}\frac{P Q}{R^2}</math>, and experimental data (circles)]]
| |
| is '''thermal loading'''; parameter, which is important property of the laser material. The thermal loading, [[saturation intensity]] <math>Q</math>
| |
| and the [[round-trip loss|loss]] <math>\beta</math> determine the limit of [[power scaling]] of the [[disk laser]]s
| |
| .<ref>{{cite journal| author=D. Kouznetsov|coauthors= J.F. Bisson, J. Dong, and K. Ueda| title=Surface loss limit of the power scaling of a thin-disk laser| journal=JOSAB| volume=23| issue=6| pages=1074–1082| year=2006| url=http://josab.osa.org/abstract.cfm?id=90157| accessdate=2007-01-26| doi=10.1364/JOSAB.23.001074| format=abstract| bibcode=2006JOSAB..23.1074K}}; [http://www.ils.uec.ac.jp/~dima/disk.pdf]</ref>
| |
| Roughly, the maximal power at the optimised sizes <math>L</math> and <math>h</math>, is of order of
| |
| <math>P=\frac{R^2}{Q\beta^3}</math>.
| |
| This estimate is very sensitive to the loss <math>\beta</math>.
| |
| However, the same expression can be interpreted as a robust estimate of the upper bound of the loss <math>~\beta~</math> required for the desirable output power <math>P</math>:
| |
| :<math>~\beta_{\mathrm{max}}=\left(\frac{R^2}{PQ}\right)^{\frac{1}{3}}.</math>
| |
| All the disk lasers reported work at the round-trip loss below this estimate.<ref name="kouz07"/>
| |
| The thermal shock parameter and the loading depend of the temperature of the heat sink.
| |
| Certain hopes are related with a laser, operating at [[cryogenic]] temperatures.
| |
| The corresponding Increase of the '''thermal shock parameter''' would allow to softer requirements for the [[round-trip loss]] of the disk laser at the [[power scaling]].
| |
| | |
| ==Examples of thermal shock failure==
| |
| {{unreferenced section|date=June 2013}}
| |
| *Hard rocks containing ore veins such as [[quartzite]] were formerly broken down using [[fire-setting]], which involved heating the rock face with a wood fire, then quenching with water to induce crack growth. It is described by [[Diodorus Siculus]] in Egyptian [[gold mine]]s, [[Pliny the Elder]] and [[Georg Agricola]].
| |
| *Ice cubes placed in a glass of warm water crack by thermal shock as the exterior surface increases in temperature much faster than the interior. As ice has a larger volume than the water that created it, the outer layer shrinks as it warms and begins to melt, whilst the interior remains largely unchanged. This rapid change in volume between different layers creates stresses in the ice that build until the force exceeds the strength of the ice, and a crack forms, sometimes with enough force to shoot ice shards out of the container.
| |
| *Incandescent bulbs that have been running for a while have a very hot surface. Splashing cold water on them can cause the glass to shatter due to thermal shock, and the bulb to implode.
| |
| *An antique cast iron cookstove is basically an iron box on legs, that has a cast iron top. One builds a wood or coal fire inside the box and cooks on the top outer surface of the box, like a griddle. If one builds too hot a fire, and then tries to cool the stove by pouring water on the top surface, it will crack and perhaps fail by thermal shock.
| |
| *The causes of three aircraft incidents in the 1990s ([[United Airlines Flight 585]], [[USAir Flight 427]] and [[Eastwind Airlines Flight 517]]). Thermal shock caused their power control unit in the tail to jam and cause rudder hardover, forcing the planes in the direction the rudder turns.
| |
| *It is widely hypothesized{{By whom|date=April 2010}} that following the [[Bellfounding|casting]] of the [[Liberty Bell]], it was allowed to cool too quickly which weakened the integrity of the bell and resulted in a large crack along the side of it the first time it was rung. Similarly, the strong gradient of temperature (due to the fire) is believed to cause the crash of the [[Tsar Bell]].
| |
| *Thermal shock is a primary contributor to [[head gasket]] failure in internal combustion engines.
| |
| | |
| ==See also==
| |
| *[[Strain (materials science)|Strain]]
| |
| *[[Impulse excitation technique]]
| |
| | |
| == References ==
| |
| {{Reflist}}
| |
| | |
| {{DEFAULTSORT:Thermal Shock}}
| |
| [[Category:Materials degradation]]
| |
| [[Category:Laser science]]
| |