Electrostatic ion cyclotron wave

The Rijndael S-box is a matrix (square array of numbers) used in the Rijndael cipher, which the Advanced Encryption Standard (AES) cryptographic algorithm was based on. The S-box (substitution box) serves as a lookup table.

Forward S-box

The S-box is generated by determining the multiplicative inverse for a given number in GF(2⁸) = GF(2)[x]/(x⁸ + x⁴ + x³ + x + 1), Rijndael's finite field (zero, which has no inverse, is set to zero). The multiplicative inverse is then transformed using the following affine transformation:

${\begin{bmatrix}1&0&0&0&1&1&1&1\\1&1&0&0&0&1&1&1\\1&1&1&0&0&0&1&1\\1&1&1&1&0&0&0&1\\1&1&1&1&1&0&0&0\\0&1&1&1&1&1&0&0\\0&0&1&1&1&1&1&0\\0&0&0&1&1&1&1&1\end{bmatrix}}{\begin{bmatrix}x_{0}\\x_{1}\\x_{2}\\x_{3}\\x_{4}\\x_{5}\\x_{6}\\x_{7}\end{bmatrix}}+{\begin{bmatrix}1\\1\\0\\0\\0\\1\\1\\0\end{bmatrix}}$

where [x₀, ..., x₇] is the multiplicative inverse as a vector.

This affine transformation is the sum of multiple rotations of the byte as a vector, where addition is the XOR operation.

For example, the multiplicative inverse of 0x11 is 0xb4. The affine transformation is defined as:

$A^{4}b4+A^{3}b4+A^{2}b4+A^{1}b4+A^{0}b4+63$
where A is the matrix:

${\begin{bmatrix}0&0&0&0&0&0&0&1\\1&0&0&0&0&0&0&0\\0&1&0&0&0&0&0&0\\0&0&1&0&0&0&0&0\\0&0&0&1&0&0&0&0\\0&0&0&0&1&0&0&0\\0&0&0&0&0&1&0&0\\0&0&0&0&0&0&1&0\end{bmatrix}}$

This can further be simplified as:

$(A^{4}+A^{3}+A^{2}+A+I)b4+63$

The rotational matrices simplify to:

${\begin{bmatrix}1&0&0&0&1&1&1&1\\1&1&0&0&0&1&1&1\\1&1&1&0&0&0&1&1\\1&1&1&1&0&0&0&1\\1&1&1&1&1&0&0&0\\0&1&1&1&1&1&0&0\\0&0&1&1&1&1&1&0\\0&0&0&1&1&1&1&1\end{bmatrix}}{\begin{bmatrix}0\\0\\1\\0\\1\\1\\0\\1\end{bmatrix}}+{\begin{bmatrix}1\\1\\0\\0\\0\\1\\1\\0\end{bmatrix}}$

which is equal to 0x82.

The matrix multiplication can be calculated by the following algorithm:

1. Store the multiplicative inverse of the input number in two 8-bit unsigned temporary variables: s and x.
2. Rotate the value s one bit to the left; if the value of s had a high bit (eighth bit from the right) of one, make the low bit of s one; otherwise the low bit of s is zero.
3. Exclusive OR the value of x with the value of s, storing the value in x
4. For three more iterations, repeat steps two and three; steps two and three are done a total of four times.
5. The value of x will now have the result of the multiplication.

After the matrix multiplication is done, exclusive or the value by the decimal number 99 (the hexadecimal number 0x63, the binary number 1100011, and the bit string 11000110 representing the number in LSb first notation).

This will generate the following S-box, which is represented here with hexadecimal notation:

   | 0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
---|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
00 |63 7c 77 7b f2 6b 6f c5 30 01 67 2b fe d7 ab 76 
10 |ca 82 c9 7d fa 59 47 f0 ad d4 a2 af 9c a4 72 c0 
20 |b7 fd 93 26 36 3f f7 cc 34 a5 e5 f1 71 d8 31 15 
30 |04 c7 23 c3 18 96 05 9a 07 12 80 e2 eb 27 b2 75 
40 |09 83 2c 1a 1b 6e 5a a0 52 3b d6 b3 29 e3 2f 84 
50 |53 d1 00 ed 20 fc b1 5b 6a cb be 39 4a 4c 58 cf 
60 |d0 ef aa fb 43 4d 33 85 45 f9 02 7f 50 3c 9f a8 
70 |51 a3 40 8f 92 9d 38 f5 bc b6 da 21 10 ff f3 d2 
80 |cd 0c 13 ec 5f 97 44 17 c4 a7 7e 3d 64 5d 19 73 
90 |60 81 4f dc 22 2a 90 88 46 ee b8 14 de 5e 0b db 
a0 |e0 32 3a 0a 49 06 24 5c c2 d3 ac 62 91 95 e4 79 
b0 |e7 c8 37 6d 8d d5 4e a9 6c 56 f4 ea 65 7a ae 08 
c0 |ba 78 25 2e 1c a6 b4 c6 e8 dd 74 1f 4b bd 8b 8a 
d0 |70 3e b5 66 48 03 f6 0e 61 35 57 b9 86 c1 1d 9e 
e0 |e1 f8 98 11 69 d9 8e 94 9b 1e 87 e9 ce 55 28 df 
f0 |8c a1 89 0d bf e6 42 68 41 99 2d 0f b0 54 bb 16 

Here the column is determined by the least significant nibble, and the row is determined by the most significant nibble. For example, the value 0x9a is converted into 0xb8 by Rijndael's S-box. Note that the multiplicative inverse of 0x00 is defined as itself.

For C, C++ here is the initialization of the table:

unsigned char s[256] = 
{
   0x63, 0x7C, 0x77, 0x7B, 0xF2, 0x6B, 0x6F, 0xC5, 0x30, 0x01, 0x67, 0x2B, 0xFE, 0xD7, 0xAB, 0x76,
   0xCA, 0x82, 0xC9, 0x7D, 0xFA, 0x59, 0x47, 0xF0, 0xAD, 0xD4, 0xA2, 0xAF, 0x9C, 0xA4, 0x72, 0xC0,
   0xB7, 0xFD, 0x93, 0x26, 0x36, 0x3F, 0xF7, 0xCC, 0x34, 0xA5, 0xE5, 0xF1, 0x71, 0xD8, 0x31, 0x15,
   0x04, 0xC7, 0x23, 0xC3, 0x18, 0x96, 0x05, 0x9A, 0x07, 0x12, 0x80, 0xE2, 0xEB, 0x27, 0xB2, 0x75,
   0x09, 0x83, 0x2C, 0x1A, 0x1B, 0x6E, 0x5A, 0xA0, 0x52, 0x3B, 0xD6, 0xB3, 0x29, 0xE3, 0x2F, 0x84,
   0x53, 0xD1, 0x00, 0xED, 0x20, 0xFC, 0xB1, 0x5B, 0x6A, 0xCB, 0xBE, 0x39, 0x4A, 0x4C, 0x58, 0xCF,
   0xD0, 0xEF, 0xAA, 0xFB, 0x43, 0x4D, 0x33, 0x85, 0x45, 0xF9, 0x02, 0x7F, 0x50, 0x3C, 0x9F, 0xA8,
   0x51, 0xA3, 0x40, 0x8F, 0x92, 0x9D, 0x38, 0xF5, 0xBC, 0xB6, 0xDA, 0x21, 0x10, 0xFF, 0xF3, 0xD2,
   0xCD, 0x0C, 0x13, 0xEC, 0x5F, 0x97, 0x44, 0x17, 0xC4, 0xA7, 0x7E, 0x3D, 0x64, 0x5D, 0x19, 0x73,
   0x60, 0x81, 0x4F, 0xDC, 0x22, 0x2A, 0x90, 0x88, 0x46, 0xEE, 0xB8, 0x14, 0xDE, 0x5E, 0x0B, 0xDB,
   0xE0, 0x32, 0x3A, 0x0A, 0x49, 0x06, 0x24, 0x5C, 0xC2, 0xD3, 0xAC, 0x62, 0x91, 0x95, 0xE4, 0x79,
   0xE7, 0xC8, 0x37, 0x6D, 0x8D, 0xD5, 0x4E, 0xA9, 0x6C, 0x56, 0xF4, 0xEA, 0x65, 0x7A, 0xAE, 0x08,
   0xBA, 0x78, 0x25, 0x2E, 0x1C, 0xA6, 0xB4, 0xC6, 0xE8, 0xDD, 0x74, 0x1F, 0x4B, 0xBD, 0x8B, 0x8A,
   0x70, 0x3E, 0xB5, 0x66, 0x48, 0x03, 0xF6, 0x0E, 0x61, 0x35, 0x57, 0xB9, 0x86, 0xC1, 0x1D, 0x9E,
   0xE1, 0xF8, 0x98, 0x11, 0x69, 0xD9, 0x8E, 0x94, 0x9B, 0x1E, 0x87, 0xE9, 0xCE, 0x55, 0x28, 0xDF,
   0x8C, 0xA1, 0x89, 0x0D, 0xBF, 0xE6, 0x42, 0x68, 0x41, 0x99, 0x2D, 0x0F, 0xB0, 0x54, 0xBB, 0x16
};

Inverse S-box

The inverse S-box is simply the S-box run in reverse. For example, the inverse S-box of 0xb8 is 0x9a. It is calculated by first calculating the inverse affine transformation of the input value, followed by the multiplicative inverse. The inverse affine transformation is as follows:

${\begin{bmatrix}0&0&1&0&0&1&0&1\\1&0&0&1&0&0&1&0\\0&1&0&0&1&0&0&1\\1&0&1&0&0&1&0&0\\0&1&0&1&0&0&1&0\\0&0&1&0&1&0&0&1\\1&0&0&1&0&1&0&0\\0&1&0&0&1&0&1&0\end{bmatrix}}{\begin{bmatrix}x_{0}\\x_{1}\\x_{2}\\x_{3}\\x_{4}\\x_{5}\\x_{6}\\x_{7}\end{bmatrix}}+{\begin{bmatrix}1\\0\\1\\0\\0\\0\\0\\0\end{bmatrix}}$

The following table represents Rijndael's inverse S-box:

   | 0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
---|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|--|
00 |52 09 6a d5 30 36 a5 38 bf 40 a3 9e 81 f3 d7 fb 
10 |7c e3 39 82 9b 2f ff 87 34 8e 43 44 c4 de e9 cb 
20 |54 7b 94 32 a6 c2 23 3d ee 4c 95 0b 42 fa c3 4e 
30 |08 2e a1 66 28 d9 24 b2 76 5b a2 49 6d 8b d1 25 
40 |72 f8 f6 64 86 68 98 16 d4 a4 5c cc 5d 65 b6 92 
50 |6c 70 48 50 fd ed b9 da 5e 15 46 57 a7 8d 9d 84 
60 |90 d8 ab 00 8c bc d3 0a f7 e4 58 05 b8 b3 45 06 
70 |d0 2c 1e 8f ca 3f 0f 02 c1 af bd 03 01 13 8a 6b 
80 |3a 91 11 41 4f 67 dc ea 97 f2 cf ce f0 b4 e6 73 
90 |96 ac 74 22 e7 ad 35 85 e2 f9 37 e8 1c 75 df 6e 
a0 |47 f1 1a 71 1d 29 c5 89 6f b7 62 0e aa 18 be 1b 
b0 |fc 56 3e 4b c6 d2 79 20 9a db c0 fe 78 cd 5a f4 
c0 |1f dd a8 33 88 07 c7 31 b1 12 10 59 27 80 ec 5f 
d0 |60 51 7f a9 19 b5 4a 0d 2d e5 7a 9f 93 c9 9c ef 
e0 |a0 e0 3b 4d ae 2a f5 b0 c8 eb bb 3c 83 53 99 61 
f0 |17 2b 04 7e ba 77 d6 26 e1 69 14 63 55 21 0c 7d 

For C, C++ implementation, here is the initialization of the table:

unsigned char inv_s[256] = 
{
   0x52, 0x09, 0x6A, 0xD5, 0x30, 0x36, 0xA5, 0x38, 0xBF, 0x40, 0xA3, 0x9E, 0x81, 0xF3, 0xD7, 0xFB,
   0x7C, 0xE3, 0x39, 0x82, 0x9B, 0x2F, 0xFF, 0x87, 0x34, 0x8E, 0x43, 0x44, 0xC4, 0xDE, 0xE9, 0xCB,
   0x54, 0x7B, 0x94, 0x32, 0xA6, 0xC2, 0x23, 0x3D, 0xEE, 0x4C, 0x95, 0x0B, 0x42, 0xFA, 0xC3, 0x4E,
   0x08, 0x2E, 0xA1, 0x66, 0x28, 0xD9, 0x24, 0xB2, 0x76, 0x5B, 0xA2, 0x49, 0x6D, 0x8B, 0xD1, 0x25,
   0x72, 0xF8, 0xF6, 0x64, 0x86, 0x68, 0x98, 0x16, 0xD4, 0xA4, 0x5C, 0xCC, 0x5D, 0x65, 0xB6, 0x92,
   0x6C, 0x70, 0x48, 0x50, 0xFD, 0xED, 0xB9, 0xDA, 0x5E, 0x15, 0x46, 0x57, 0xA7, 0x8D, 0x9D, 0x84,
   0x90, 0xD8, 0xAB, 0x00, 0x8C, 0xBC, 0xD3, 0x0A, 0xF7, 0xE4, 0x58, 0x05, 0xB8, 0xB3, 0x45, 0x06,
   0xD0, 0x2C, 0x1E, 0x8F, 0xCA, 0x3F, 0x0F, 0x02, 0xC1, 0xAF, 0xBD, 0x03, 0x01, 0x13, 0x8A, 0x6B,
   0x3A, 0x91, 0x11, 0x41, 0x4F, 0x67, 0xDC, 0xEA, 0x97, 0xF2, 0xCF, 0xCE, 0xF0, 0xB4, 0xE6, 0x73,
   0x96, 0xAC, 0x74, 0x22, 0xE7, 0xAD, 0x35, 0x85, 0xE2, 0xF9, 0x37, 0xE8, 0x1C, 0x75, 0xDF, 0x6E,
   0x47, 0xF1, 0x1A, 0x71, 0x1D, 0x29, 0xC5, 0x89, 0x6F, 0xB7, 0x62, 0x0E, 0xAA, 0x18, 0xBE, 0x1B,
   0xFC, 0x56, 0x3E, 0x4B, 0xC6, 0xD2, 0x79, 0x20, 0x9A, 0xDB, 0xC0, 0xFE, 0x78, 0xCD, 0x5A, 0xF4,
   0x1F, 0xDD, 0xA8, 0x33, 0x88, 0x07, 0xC7, 0x31, 0xB1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xEC, 0x5F,
   0x60, 0x51, 0x7F, 0xA9, 0x19, 0xB5, 0x4A, 0x0D, 0x2D, 0xE5, 0x7A, 0x9F, 0x93, 0xC9, 0x9C, 0xEF,
   0xA0, 0xE0, 0x3B, 0x4D, 0xAE, 0x2A, 0xF5, 0xB0, 0xC8, 0xEB, 0xBB, 0x3C, 0x83, 0x53, 0x99, 0x61,
   0x17, 0x2B, 0x04, 0x7E, 0xBA, 0x77, 0xD6, 0x26, 0xE1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0C, 0x7D
};

Design criteria

The Rijndael S-Box was specifically designed to be resistant to linear and differential cryptanalysis. This was done by minimizing the correlation between linear transformations of input/output bits, and at the same time minimizing the difference propagation probability.

In addition, to strengthen the S-Box against algebraic attacks, the affine transformation was added. In the case of suspicion of a backdoor being built into the cipher, the current S-box might be replaced by another one. The authors claim that the Rijndael cipher structure should provide enough resistance against differential and linear cryptanalysis, even if an S-Box with "average" correlation / difference propagation properties is used.

An alternate equation for the affine transformation

An equivalent equation for the affine transformation is

$b'_{i}=b_{i}\oplus b_{(i+4)mod8}\oplus b_{(i+5)mod8}\oplus b_{(i+6)mod8}\oplus b_{(i+7)mod8}\oplus c_{i}$

where b' b and c are 8 bit arrays and c is 01100011.

Implementations

This can be done with the following Java code:

public static boolean[] affineX (boolean[] bprime, boolean[] b, boolean[] c) {	
    for (int j=0; j<8; j++) {
	bprime[j]  = b[j] ^ b[(j+4)%8];
	bprime[j] ^= b[(j+5)%8];
	bprime[j] ^= b[(j+6)%8];
	bprime[j] ^= b[(j+7)%8];
	bprime[j] ^= c[j];
    }
    return  bprime;
}

References

43 year old Petroleum Engineer Harry from Deep River, usually spends time with hobbies and interests like renting movies, property developers in singapore new condominium and vehicle racing. Constantly enjoys going to destinations like Camino Real de Tierra Adentro.