Noise-equivalent flux density

Template:Infobox Algorithm Quicksort, or partition-exchange sort, is a sorting algorithm developed by Tony Hoare that, on average, makes O(n log n) comparisons to sort n items. In the worst case, it makes O(n²) comparisons, though this behavior is rare. Quicksort is often faster in practice than other O(n log n) algorithms. Additionally, quicksort's sequential and localized memory references work well with a cache. Quicksort is a comparison sort and, in efficient implementations, is not a stable sort. Quicksort can be implemented with an in-place partitioning algorithm, so the entire sort can be done with only O(log n) additional space used by the stack during the recursion.

History

The quicksort algorithm was developed in 1960 by Tony Hoare while in the Soviet Union, as a visiting student at Moscow State University. At that time, Hoare worked in a project on machine translation for the National Physical Laboratory. He developed the algorithm in order to sort the words to be translated, to make them more easily matched to an already-sorted Russian-to-English dictionary that was stored on magnetic tape.

Quicksort gained widespread adoption, appearing a.o. in Unix as the default library sort function, whence it lent its name to the C standard library function qsort and in the reference implementation of Java. It was analyzed extensively by Robert Sedgewick, who wrote his Ph.D. thesis about the algorithm and suggested several improvements.

Algorithm

Full example of quicksort on a random set of numbers. The shaded element is the pivot. It is always chosen as the last element of the partition. However, always choosing the last element in the partition as the pivot in this way results in poor performance ($O(n^2)$) on already sorted lists, or lists of identical elements. Since sub-lists of sorted / identical elements crop up a lot towards the end of a sorting procedure on a large set, versions of the quicksort algorithm which choose the pivot as the middle element run much more quickly than the algorithm described in this diagram on large sets of numbers.

Quicksort is a divide and conquer algorithm. Quicksort first divides a large list into two smaller sub-lists: the low elements and the high elements. Quicksort can then recursively sort the sub-lists.

The steps are:

1. Pick an element, called a pivot, from the list.
2. Reorder the list so that all elements with values less than the pivot come before the pivot, while all elements with values greater than the pivot come after it (equal values can go either way). After this partitioning, the pivot is in its final position. This is called the partition operation.
3. Recursively apply the above steps to the sub-list of elements with smaller values and separately the sub-list of elements with greater values.

The base case of the recursion are lists of size zero or one, which never need to be sorted.

Simple version

In simple pseudocode, the algorithm might be expressed as this:

 function quicksort(array)
     if length(array) ≤ 1
         return array  // an array of zero or one elements is already sorted
     select and remove a pivot element pivot from 'array'  // see '#Choice of pivot' below
     create empty lists less and greater
     for each x in array
         if x ≤ pivot then append x to less
         else append x to greater
     return concatenate(quicksort(less), list(pivot), quicksort(greater)) // two recursive calls

Notice that we only examine elements by comparing them to other elements. This makes quicksort a comparison sort. This version is also a stable sort (assuming that the "for each" method retrieves elements in original order, and the pivot selected is the last among those of equal value).

The correctness of the partition algorithm is based on the following two arguments:

• At each iteration, all the elements processed so far are in the desired position: before the pivot if less than the pivot's value, after the pivot if greater than the pivot's value (loop invariant).
• Each iteration leaves one fewer element to be processed (loop variant).

The correctness of the overall algorithm can be proven via induction: for zero or one element, the algorithm leaves the data unchanged; for a larger data set it produces the concatenation of two parts, elements less than the pivot and elements greater than it, themselves sorted by the recursive hypothesis.

Benefits of Residing in a Apartment or Landed property in Singapore Property New Launches & Project Showcase In Singapore Many residential Singapore property sales involve buying property in Singapore at new launches. These are often homes underneath building, being sold new by developers. New Launch Singapore Property, 28 Imperial Residences Coming To Geylang Lorong 26 The property market is slowing down, based on personal property transactions in May Cell Apps FREE Sign Up Log in Property Brokers Feedback

Individuals all wish to be seen having the identical foresight as the experts in property investment or the massive names in their own fields. Thus the discharge of these tales works to encourage different buyers to observe suit. Bartley Ridge is the most popular new launch in district 13. Irresistible pricing from $1,1xx psf. Bartley Ridge is a ninety nine-12 months leasehold new condominium at Mount Vernon road, good next to Bartley MRT station (CC12). If you want to get more Rehda Johor chairman Koh Moo Hing said potential property consumers in the two areas Http://Modern.Dowatch.Net/Profile/Mic31K/Created/Topics are now adopting a wait-and-see attitude. How can I get the ebrochure and flooring plans of the new launch projects ? The Existing Mortgage on your HDB District 13, Freehold condominium District 11, Freehold Cluster landed house Sea Horizon EC @ Pasir Ris

FindSgNewLaunch is the main Singapore Property web site - one of the best place to begin your actual estate search whether you might be an investor, shopping for for own use, or searching for a spot to lease. With detailed details about each property, together with maps and pictures. We deliver you probably the most complete choice out there. No. For brand spanking new Singapore property gross sales, you possibly can withdraw at any time earlier than booking the unit, without penalty. On the preview, the agent will let you recognize the exact worth for you to resolve whether or not to proceed or not. Solely when you resolve to proceed will the agent book the unit for you. Pending for Sale Licence Approval All Pending for Sale Licence Approval New launch FREEHOLD condominium @ Braddell New launch condominium combined growth at Yishun PROJECT TITLE

To not worry, we'll hold you in our VIP Precedence list for future new launch VIP Preview. We'll contact you to establish your wants and advocate related tasks, both new launch or resale properties that probably match your standards. In case you're looking for resale property, such as these few years old, or just got Short-term Occupation Permit (PRIME), you might click on here right here for fast search and submit your shortlisted listings to us, we'll check and call you for viewing.

Oceanfront Suites, irresistible pricing for a 946 leasehold property with magnificent sea view. Dreaming of basking and feeling the warmth of pure sunlight is now just a click on away. Oceanfront Suites - Seaside residing no longer needs to remain an unattainable This Cambodia new launch, a mega development has also 762 residential models. Additionally located within this Oxley abroad property is a mega shopping center with 627 outlets and also up to 963 available workplace spaces and is surrounded by quite a few Embassy, resorts, Casinos and many vacationer relax space. Belysa EC @ Pasir Ris Esparina EC @ Sengkang Dell Launches World's first Gender-GEDI Female Entrepreneurship Index on 06/04/thirteen by Istanbul, Turkey. Paris Ris EC @ Paris Ris in search of indication of curiosity.

The developer should open a Venture Account with a financial institution or monetary establishment for every housing venture he undertakes, before he's issued with a Sale License (license to sell models in his development). All payments from buyers before completion of the challenge, and construction loans, go into the mission account. New launch rental LA FIESTA, an thrilling new condominium located along Sengkang Square / Compassvale Highway is a brief stroll to the bustling Sengkang City Centre the place the bus interchange, Sengkang MRT and LRT stations are located. Glorious location,Premium rental with Bayfront resort lifestyle theme and views ofwaterscape. Close to EC pricing - Worth for cash! Apr 02, 2013 Sengkang New Rental Launch, La Fiesta- Sengkang MRTstation at your gate.

As The Hillford property launch at Jalan Jurong Kechil may be very close to to beauty world mrt , the environment for the plot of land which belongs to World Class Land remains very upbeat as it is rather close to to Holland Village. Review now by visiting the brand new apartment pages on our website, each displaying complete particulars and the latest information of each new launch. You can even contact us directly to obtain quick & correct answers to all of your questions with high of the road service. An inevitable conclusion is that costs within the property market have just set new highs. The apparent connotation for potential buyers is to take motion now before prices bounce again. tract and points to his property line, marked by a big maple in a sea of Search SG Developersale.com

In-place partition in action on a small list. The boxed element is the pivot element, blue elements are less or equal, and red elements are larger.

In-place version

The disadvantage of the simple version above is that it requires O(n) extra storage space, which is as bad as naive merge sort. The additional memory allocations required can also drastically impact speed and cache performance in practical implementations. There is a more complex version which uses an in-place partition algorithm and can achieve the complete sort using O(log n) space (not counting the input) on average (for the call stack). We start with a partition function:

  // left is the index of the leftmost element of the subarray
  // right is the index of the rightmost element of the subarray (inclusive)
  // number of elements in subarray = right-left+1
  function partition(array, left, right, pivotIndex)
     pivotValue := array[pivotIndex]
     swap array[pivotIndex] and array[right]  // Move pivot to end
     storeIndex := left
     for i from left to right - 1  // left ≤ i < right
         if array[i] <= pivotValue
             swap array[i] and array[storeIndex]
             storeIndex := storeIndex + 1  // only increment storeIndex if swapped
     swap array[storeIndex] and array[right]  // Move pivot to its final place
     return storeIndex

This is the in-place partition algorithm. It partitions the portion of the array between indexes left and right, inclusively, by moving all elements less than array[pivotIndex] before the pivot, and the equal or greater elements after it. In the process it also finds the final position for the pivot element, which it returns. It temporarily moves the pivot element to the end of the subarray, so that it doesn't get in the way. Because it only uses exchanges, the final list has the same elements as the original list. Notice that an element may be exchanged multiple times before reaching its final place. Also, in case of pivot duplicates in the input array, they can be spread across the right subarray, in any order. This doesn't represent a partitioning failure, as further sorting will reposition and finally "glue" them together.

This form of the partition algorithm is not the original form; multiple variations can be found in various textbooks, such as versions not having the storeIndex. However, this form is probably the easiest to understand.

Once we have this, writing quicksort itself is easy:

 function quicksort(array, left, right)
     // If the list has 2 or more items
     if left < right
         // See "#Choice of pivot" section below for possible choices
         choose any pivotIndex such that left ≤ pivotIndex ≤ right
         // Get lists of bigger and smaller items and final position of pivot
         pivotNewIndex := partition(array, left, right, pivotIndex)
         // Recursively sort elements smaller than the pivot (assume pivotNewIndex - 1 does not underflow)
         quicksort(array, left, pivotNewIndex - 1)
         // Recursively sort elements at least as big as the pivot (assume pivotNewIndex + 1 does not overflow)
         quicksort(array, pivotNewIndex + 1, right)

Each recursive call to this quicksort function reduces the size of the array being sorted by at least one element, since in each invocation the element at pivotNewIndex is placed in its final position. Therefore, this algorithm is guaranteed to terminate after at most n recursive calls. However, since partition reorders elements within a partition, this version of quicksort is not a stable sort.

Implementation issues

Choice of pivot

In very early versions of quicksort, the leftmost element of the partition would often be chosen as the pivot element. Unfortunately, this causes worst-case behavior on already sorted arrays, which is a rather common use-case. The problem was easily solved by choosing either a random index for the pivot, choosing the middle index of the partition or (especially for longer partitions) choosing the median of the first, middle and last element of the partition for the pivot (as recommended by Sedgewick).

Selecting a pivot element is also complicated by the existence of integer overflow. If the boundary indices of the subarray being sorted are sufficiently large, the naïve expression for the middle index, (left + right)/2, will cause overflow and provide an invalid pivot index. This can be overcome by using, for example, left + (right-left)/2 to index the middle element, at the cost of more complex arithmetic. Similar issues arise in some other methods of selecting the pivot element.

Repeated elements

With a partitioning algorithm such as the one described above (even with one that chooses good pivot values), quicksort exhibits poor performance for inputs that contain many repeated elements. The problem is clearly apparent when all the input elements are equal: at each recursion, the left partition is empty (no input values are less than the pivot), and the right partition has only decreased by one element (the pivot is removed). Consequently, the algorithm takes quadratic time to sort an array of equal values.

To solve this quicksort equivalent of the Dutch national flag problem, an alternative linear-time partition routine can be used that separates the values into three groups: values less than the pivot, values equal to the pivot, and values greater than the pivot. (Bentley and McIlroy call this a "fat partition" and note that it was already implemented in the qsort of Version 7 Unix.) The values equal to the pivot are already sorted, so only the less-than and greater-than partitions need to be recursively sorted. In pseudocode, the quicksort algorithm becomes

function quicksort(A, lo, hi)
    if lo < hi
        p = pivot(A, lo, hi)
        left, right = partition(A, p, lo, hi)  // note: multiple return values
        quicksort(A, lo, left)
        quicksort(A, right, hi)

The best case for the algorithm now occurs when all elements are equal (or are chosen from a small set of Buying, selling and renting HDB and personal residential properties in Singapore are simple and transparent transactions. Although you are not required to engage a real property salesperson (generally often known as a "public listed property developers In singapore agent") to complete these property transactions, chances are you'll think about partaking one if you are not accustomed to the processes concerned.

Professional agents are readily available once you need to discover an condominium for hire in singapore In some cases, landlords will take into account you more favourably in case your agent comes to them than for those who tried to method them by yourself. You need to be careful, nevertheless, as you resolve in your agent. Ensure that the agent you are contemplating working with is registered with the IEA – Institute of Estate Brokers. Whereas it might sound a hassle to you, will probably be worth it in the end. The IEA works by an ordinary algorithm and regulations, so you'll protect yourself in opposition to probably going with a rogue agent who prices you more than they should for his or her service in finding you an residence for lease in singapore.

There isn't any deal too small. Property agents who are keen to find time for any deal even if the commission is small are the ones you want on your aspect. Additionally they present humbleness and might relate with the typical Singaporean higher. Relentlessly pursuing any deal, calling prospects even without being prompted. Even if they get rejected a hundred times, they still come again for more. These are the property brokers who will find consumers what they need eventually, and who would be the most successful in what they do. 4. Honesty and Integrity

This feature is suitable for you who need to get the tax deductions out of your PIC scheme to your property agency firm. It's endorsed that you visit the correct site for filling this tax return software. This utility must be submitted at the very least yearly to report your whole tax and tax return that you're going to receive in the current accounting 12 months. There may be an official website for this tax filling procedure. Filling this tax return software shouldn't be a tough thing to do for all business homeowners in Singapore.

A wholly owned subsidiary of SLP Worldwide, SLP Realty houses 900 associates to service SLP's fast rising portfolio of residential tasks. Real estate is a human-centric trade. Apart from offering comprehensive coaching applications for our associates, SLP Realty puts equal emphasis on creating human capabilities and creating sturdy teamwork throughout all ranges of our organisational hierarchy. Worldwide Presence At SLP International, our staff of execs is pushed to make sure our shoppers meet their enterprise and investment targets. Under is an inventory of some notable shoppers from completely different industries and markets, who've entrusted their real estate must the expertise of SLP Worldwide.

If you're looking for a real estate or Singapore property agent online, you merely need to belief your instinct. It is because you don't know which agent is sweet and which agent will not be. Carry out research on a number of brokers by looking out the internet. As soon as if you find yourself certain that a selected agent is dependable and trustworthy, you'll be able to choose to utilize his partnerise find you a house in Singapore. More often than not, a property agent is considered to be good if she or he places the contact data on his web site. This is able to imply that the agent does not thoughts you calling them and asking them any questions regarding properties in Singapore. After chatting with them you too can see them of their office after taking an appointment.

Another method by way of which you could find out whether the agent is sweet is by checking the feedback, of the shoppers, on the website. There are various individuals would publish their comments on the web site of the Singapore property agent. You can take a look at these feedback and the see whether it will be clever to hire that specific Singapore property agent. You may even get in contact with the developer immediately. Many Singapore property brokers know the developers and you may confirm the goodwill of the agent by asking the developer. elements). In the case of all equal elements, the modified quicksort will perform at most two recursive calls on empty subarrays and thus finish in linear time.

Optimizations

Two other important optimizations, also suggested by Sedgewick and widely used in practice are:

• To make sure at most O(log N) space is used, recurse first into the smaller half of the array, and use a tail call to recurse into the other.
• Use insertion sort, which has a smaller constant factor and is thus faster on small arrays, for invocations on small arrays (i.e. where the length is less than a threshold k determined experimentally). This can be implemented by simply stopping the recursion when less than k elements are left, leaving the entire array k-sorted: each element will be at most k positions away from its final position. Then, a single insertion sort pass finishes the sort in O(k×n) time. A separate insertion sort of each small segment as they are identified adds the overhead of starting and stopping many small sorts, but avoids wasting effort comparing keys across the many segment boundaries, which keys will be in order due to the workings of the quicksort process.

Parallelization

Like merge sort, quicksort can also be parallelized due to its divide-and-conquer nature. Individual in-place partition operations are difficult to parallelize, but once divided, different sections of the list can be sorted in parallel. The following is a straightforward approach: If we have $p$ processors, we can divide a list of $n$ elements into $p$ sublists in O(n) average time, then sort each of these in $O(\frac{n}{p}\log \frac{n}{p})$ average time. Ignoring the O(n) preprocessing and merge times, this is linear speedup. If the split is blind, ignoring the values, the merge naïvely costs O(n). If the split partitions based on a succession of pivots, it is tricky to parallelize and naïvely costs O(n). Given O(log n) or more processors, only O(n) time is required overall, whereas an approach with linear speedup would achieve O(log n) time for overall.

One advantage of this simple parallel quicksort over other parallel sort algorithms is that no synchronization is required, but the disadvantage is that sorting is still O(n) and only a sublinear speedup of O(log n) is achieved. A new thread is started as soon as a sublist is available for it to work on and it does not communicate with other threads. When all threads complete, the sort is done.

Other more sophisticated parallel sorting algorithms can achieve even better time bounds. For example, in 1991 David Powers described a parallelized quicksort (and a related radix sort) that can operate in O(log n) time on a CRCW PRAM with n processors by performing partitioning implicitly.

Formal analysis

Average-case analysis using discrete probability

Quicksort takes O(n log n) time on average, when the input is a random permutation. Why? For a start, it is not hard to see that the partition operation takes O(n) time.

In the most unbalanced case, each time we perform a partition we divide the list into two sublists of size 0 and $n-1$ (for example, if all elements of the array are equal). This means each recursive call processes a list of size one less than the previous list. Consequently, we can make $n-1$ nested calls before we reach a list of size 1. This means that the call tree is a linear chain of $n-1$ nested calls. The $i$th call does $O(n-i)$ work to do the partition, and ${\sum }_{i=0}^n(n-i)=O(n^2)$, so in that case Quicksort takes $O(n^2)$ time. That is the worst case: given knowledge of which comparisons are performed by the sort, there are adaptive algorithms that are effective at generating worst-case input for quicksort on-the-fly, regardless of the pivot selection strategy.

In the most balanced case, each time we perform a partition we divide the list into two nearly equal pieces. This means each recursive call processes a list of half the size. Consequently, we can make only ${\log }_{2}n$ nested calls before we reach a list of size 1. This means that the depth of the call tree is ${\log }_{2}n$. But no two calls at the same level of the call tree process the same part of the original list; thus, each level of calls needs only O(n) time all together (each call has some constant overhead, but since there are only O(n) calls at each level, this is subsumed in the O(n) factor). The result is that the algorithm uses only O(n log n) time.

In fact, it's not necessary to be perfectly balanced; even if each pivot splits the elements with 75% on one side and 25% on the other side (or any other fixed fraction), the call depth is still limited to ${\log }_{4/3}n$, so the total running time is still O(n log n).

So what happens on average? If the pivot has rank somewhere in the middle 50 percent, that is, between the 25th percentile and the 75th percentile, then it splits the elements with at least 25% and at most 75% on each side. If we could consistently choose a pivot from the two middle 50 percent, we would only have to split the list at most ${\log }_{4/3}n$ times before reaching lists of size 1, yielding an O(n log n) algorithm.

When the input is a random permutation, the pivot has a random rank, and so it is not guaranteed to be in the middle 50 percent. However, when we start from a random permutation, in each recursive call the pivot has a random rank in its list, and so it is in the middle 50 percent about half the time. That is good enough. Imagine that you flip a coin: heads means that the rank of the pivot is in the middle 50 percent, tail means that it isn't. Imagine that you are flipping a coin over and over until you get k heads. Although this could take a long time, on average only 2k flips are required, and the chance that you won't get $k$ heads after $100k$ flips is highly improbable (this can be made rigorous using Chernoff bounds). By the same argument, Quicksort's recursion will terminate on average at a call depth of only $2{\log }_{4/3}n$. But if its average call depth is O(log n), and each level of the call tree processes at most $n$ elements, the total amount of work done on average is the product, O(n log n). Note that the algorithm does not have to verify that the pivot is in the middle half—if we hit it any constant fraction of the times, that is enough for the desired complexity.

Average-case analysis using recurrences

An alternative approach is to set up a recurrence relation for the T(n) factor, the time needed to sort a list of size $n$. In the most unbalanced case, a single Quicksort call involves O(n) work plus two recursive calls on lists of size $0$ and $n-1$, so the recurrence relation is

$T(n)=O(n)+T(0)+T(n-1)=O(n)+T(n-1).$

This is the same relation as for insertion sort and selection sort, and it solves to worst case $T(n)=O(n^2)$.

In the most balanced case, a single quicksort call involves O(n) work plus two recursive calls on lists of size $n/2$, so the recurrence relation is

$T(n)=O(n)+2T\left(\frac{n}{2}\right).$

The master theorem tells us that T(n) = O(n log n).

The outline of a formal proof of the O(n log n) expected time complexity follows. Assume that there are no duplicates as duplicates could be handled with linear time pre- and post-processing, or considered cases easier than the analyzed. When the input is a random permutation, the rank of the pivot is uniform random from 0 to n-1. Then the resulting parts of the partition have sizes i and n-i-1, and i is uniform random from 0 to n-1. So, averaging over all possible splits and noting that the number of comparisons for the partition is $n-1$, the average number of comparisons over all permutations of the input sequence can be estimated accurately by solving the recurrence relation:

$C(n)=n-1+\frac{1}{n}\sum _{i=0}^{n-1}(C(i)+C(n-i-1))$

Solving the recurrence gives $C(n)=2n\ln n=1.39n{\log }_{2}n.$

This means that, on average, quicksort performs only about 39% worse than in its best case. In this sense it is closer to the best case than the worst case. Also note that a comparison sort cannot use less than ${\log }_2(n!)$ comparisons on average to sort $n$ items (as explained in the article Comparison sort) and in case of large $n$, Stirling's approximation yields ${\log }_2(n!)\approx n({\log }_{2}n-{\log }_{2}e)$, so quicksort is not much worse than an ideal comparison sort. This fast average runtime is another reason for quicksort's practical dominance over other sorting algorithms.

Analysis of Randomized quicksort

Using the same analysis, one can show that Randomized quicksort has the desirable property that, for any input, it requires only O(n log n) expected time (averaged over all choices of pivots). However, there exists a combinatorial proof, more elegant than both the analysis using discrete probability and the analysis using recurrences.

To each execution of Quicksort corresponds the following binary search tree (BST): the initial pivot is the root node; the pivot of the left half is the root of the left subtree, the pivot of the right half is the root of the right subtree, and so on. The number of comparisons of the execution of Quicksort equals the number of comparisons during the construction of the BST by a sequence of insertions. So, the average number of comparisons for randomized Quicksort equals the average cost of constructing a BST when the values inserted $(x_1,x_2,...,x_n)$ form a random permutation.

Consider a BST created by insertion of a sequence $(x_1,x_2,...,x_n)$ of values forming a random permutation. Let C denote the cost of creation of the BST. We have: $C=\sum _i\sum _{j<i}$ (whether during the insertion of $x_i$ there was a comparison to $x_j$).

By linearity of expectation, the expected value E(C) of C is $E(C)=\sum _i\sum _{j<i}$ Pr(during the insertion of $x_i$ there was a comparison to $x_j$).

Fix i and j<i. The values $x_1,x_2,...,x_j$, once sorted, define j+1 intervals. The core structural observation is that $x_i$ is compared to $x_j$ in the algorithm if and only if $x_i$ falls inside one of the two intervals adjacent to $x_j$.

Observe that since $(x_1,x_2,...,x_n)$ is a random permutation, $(x_1,x_2,...,x_j,x_i)$ is also a random permutation, so the probability that $x_i$ is adjacent to $x_j$ is exactly $2/(j+1)$.

We end with a short calculation: $E(C)=\sum _i\sum _{j<i}2/(j+1)=O(\sum _i\log i)=O(n\log n).$

Space complexity

The space used by quicksort depends on the version used.

The in-place version of quicksort has a space complexity of O(log n), even in the worst case, when it is carefully implemented using the following strategies:

• in-place partitioning is used. This unstable partition requires O(1) space.
• After partitioning, the partition with the fewest elements is (recursively) sorted first, requiring at most O(log n) space. Then the other partition is sorted using tail recursion or iteration, which doesn't add to the call stack. This idea, as discussed above, was described by R. Sedgewick, and keeps the stack depth bounded by O(log n).

Quicksort with in-place and unstable partitioning uses only constant additional space before making any recursive call. Quicksort must store a constant amount of information for each nested recursive call. Since the best case makes at most O(log n) nested recursive calls, it uses O(log n) space. However, without Sedgewick's trick to limit the recursive calls, in the worst case quicksort could make O(n) nested recursive calls and need O(n) auxiliary space.

From a bit complexity viewpoint, variables such as left and right do not use constant space; it takes O(log n) bits to index into a list of n items. Because there are such variables in every stack frame, quicksort using Sedgewick's trick requires $O((\log n{)}^2)$ bits of space. This space requirement isn't too terrible, though, since if the list contained distinct elements, it would need at least O(n log n) bits of space.

Another, less common, not-in-place, version of quicksort uses O(n) space for working storage and can implement a stable sort. The working storage allows the input array to be easily partitioned in a stable manner and then copied back to the input array for successive recursive calls. Sedgewick's optimization is still appropriate.

Selection-based pivoting

A selection algorithm chooses the kth smallest of a list of numbers; this is an easier problem in general than sorting. One simple but effective selection algorithm works nearly in the same manner as quicksort, and is accordingly known as quickselect. The difference is that instead of making recursive calls on both sublists, it only makes a single tail-recursive call on the sublist which contains the desired element. This change lowers the average complexity to linear or O(n) time, which is optimal for selection, but worst-case time is still O(n²).

A variant of quickselect, the median of medians algorithm, chooses pivots more carefully, ensuring that the pivots are near the middle of the data (between the 30th and 70th percentiles), and thus has guaranteed linear time – worst-case O(n). This same pivot strategy can be used to construct a variant of quickselect (median of medians quicksort) with worst-case O(n) time. However, the overhead of choosing the pivot is significant, so this is generally not used in practice.

More abstractly, given a worst-case O(n) selection algorithm, one can use it to find the ideal pivot (the median) at every step of quicksort, producing a variant with worst-case O(n log n) running time. In practical implementations this variant is considerably slower on average, but it is of theoretical interest, showing how an optimal selection algorithm can yield an optimal sorting algorithm.

Variants

There are four well known variants of quicksort:

• Balanced quicksort: choose a pivot likely to represent the middle of the values to be sorted, and then follow the regular quicksort algorithm.
• External quicksort: The same as regular quicksort except the pivot is replaced by a buffer. First, read the M/2 first and last elements into the buffer and sort them. Read the next element from the beginning or end to balance writing. If the next element is less than the least of the buffer, write it to available space at the beginning. If greater than the greatest, write it to the end. Otherwise write the greatest or least of the buffer, and put the next element in the buffer. Keep the maximum lower and minimum upper keys written to avoid resorting middle elements that are in order. When done, write the buffer. Recursively sort the smaller partition, and loop to sort the remaining partition. This is a kind of three-way quicksort in which the middle partition (buffer) represents a sorted subarray of elements that are approximately equal to the pivot.
• Three-way radix quicksort (developed by Sedgewick and also known as multikey quicksort): is a combination of radix sort and quicksort. Pick an element from the array (the pivot) and consider the first character (key) of the string (multikey). Partition the remaining elements into three sets: those whose corresponding character is less than, equal to, and greater than the pivot's character. Recursively sort the "less than" and "greater than" partitions on the same character. Recursively sort the "equal to" partition by the next character (key). Given we sort using bytes or words of length W bits, the best case is O(KN) and the worst case O(2^KN) or at least O(N²) as for standard quicksort, given for unique keys N<2^K, and K is a hidden constant in all standard comparison sort algorithms including quicksort. This is a kind of three-way quicksort in which the middle partition represents a (trivially) sorted subarray of elements that are exactly equal to the pivot.
• Quick radix sort (also developed by Powers as a o(K) parallel PRAM algorithm). This is again a combination of radix sort and quicksort but the quicksort left/right partition decision is made on successive bits of the key, and is thus O(KN) for N K-bit keys. Note that all comparison sort algorithms effectively assume an ideal K of O(logN) as if k is smaller we can sort in O(N) using a hash table or integer sorting, and if K >> logN but elements are unique within O(logN) bits, the remaining bits will not be looked at by either quicksort or quick radix sort, and otherwise all comparison sorting algorithms will also have the same overhead of looking through O(K) relatively useless bits but quick radix sort will avoid the worst case O(N²) behaviours of standard quicksort and quick radix sort, and will be faster even in the best case of those comparison algorithms under these conditions of uniqueprefix(K) >> logN. See Powers for further discussion of the hidden overheads in comparison, radix and parallel sorting.

Comparison with other sorting algorithms

Quicksort is a space-optimized version of the binary tree sort. Instead of inserting items sequentially into an explicit tree, quicksort organizes them concurrently into a tree that is implied by the recursive calls. The algorithms make exactly the same comparisons, but in a different order. An often desirable property of a sorting algorithm is stability - that is the order of elements that compare equal is not changed, allowing controlling order of multikey tables (e.g. directory or folder listings) in a natural way. This property is hard to maintain for in situ (or in place) quicksort (that uses only constant additional space for pointers and buffers, and logN additional space for the management of explicit or implicit recursion). For variant quicksorts involving extra memory due to representations using pointers (e.g. lists or trees) or files (effectively lists), it is trivial to maintain stability. The more complex, or disk-bound, data structures tend to increase time cost, in general making increasing use of virtual memory or disk.

The most direct competitor of quicksort is heapsort. Heapsort's worst-case running time is always O(n log n). But, heapsort is assumed to be on average somewhat slower than standard in-place quicksort. This is still debated and in research, with some publications indicating the opposite. Introsort is a variant of quicksort that switches to heapsort when a bad case is detected to avoid quicksort's worst-case running time. If it is known in advance that heapsort is going to be necessary, using it directly will be faster than waiting for introsort to switch to it.

Quicksort also competes with mergesort, another recursive sort algorithm but with the benefit of worst-case O(n log n) running time. Mergesort is a stable sort, unlike standard in-place quicksort and heapsort, and can be easily adapted to operate on linked lists and very large lists stored on slow-to-access media such as disk storage or network attached storage. Although quicksort can easily be implemented as a stable sort using linked lists, it will often suffer from poor pivot choices without random access. The main disadvantage of mergesort is that, when operating on arrays, efficient implementations require O(n) auxiliary space, whereas the variant of quicksort with in-place partitioning and tail recursion uses only O(log n) space. (Note that when operating on linked lists, mergesort only requires a small, constant amount of auxiliary storage.)

Bucket sort with two buckets is very similar to quicksort; the pivot in this case is effectively the value in the middle of the value range, which does well on average for uniformly distributed inputs.

One-parameter family of Partition sorts

Richard Cole and David C. Kandathil, in 2004, discovered a one-parameter family of sorting algorithms, called Partition sorts, which on average (with all input orderings equally likely) perform at most $n\log n+O(n)$ comparisons (close to the information theoretic lower bound) and $\mathrm{\Theta }(n\log n)$ operations; at worst they perform $\mathrm{\Theta }(n{\log }^{2}n)$ comparisons (and also operations); these are in-place, requiring only additional $O(\log n)$ space. Practical efficiency and smaller variance in performance were demonstrated against optimised quicksorts (of Sedgewick and Bentley-McIlroy).

See also

• Introsort
• Flashsort

Notes

43 year old Petroleum Engineer Harry from Deep River, usually spends time with hobbies and interests like renting movies, property developers in singapore new condominium and vehicle racing. Constantly enjoys going to destinations like Camino Real de Tierra Adentro.

References

• Template:Cite doi
• Template:Cite doi
• Template:Cite doi
• Template:Cite doi
• Template:Cite doi
• Template:Cite doi (Reprinted in Hoare and Jones: Essays in computing science, 1989.)
• Template:Cite doi
• Donald Knuth. The Art of Computer Programming, Volume 3: Sorting and Searching, Third Edition. Addison-Wesley, 1997. ISBN 0-201-89685-0. Pages 113–122 of section 5.2.2: Sorting by Exchanging.
• Thomas H. Cormen, Charles E. Leiserson, Ronald L. Rivest, and Clifford Stein. Introduction to Algorithms, Second Edition. MIT Press and McGraw-Hill, 2001. ISBN 0-262-03293-7. Chapter 7: Quicksort, pp. 145–164.
• A. LaMarca and R. E. Ladner. "The Influence of Caches on the Performance of Sorting." Proceedings of the Eighth Annual ACM-SIAM Symposium on Discrete Algorithms, 1997. pp. 370–379.
• Faron Moller. Analysis of Quicksort. CS 332: Designing Algorithms. Department of Computer Science, Swansea University.
• Template:Cite doi
• Template:Cite doi

External links

DTZ's auction group in Singapore auctions all types of residential, workplace and retail properties, retailers, homes, accommodations, boarding houses, industrial buildings and development websites. Auctions are at the moment held as soon as a month.

Whitehaven @ Pasir Panjang – A boutique improvement nicely nestled peacefully in serene Pasir Panjang personal estate presenting a hundred and twenty rare freehold private apartments tastefully designed by the famend Ong & Ong Architect. Only a short drive away from Science Park and NUS Campus, Jade Residences, a recent Freehold condominium which offers high quality lifestyle with wonderful facilities and conveniences proper at its door steps. Its fashionable linear architectural fashion promotes peace and tranquility living nestled within the D19 personal housing enclave. Rising workplace sector leads real estate market efficiency, while prime retail and enterprise park segments moderate and residential sector continues in decline International Market Perspectives - 1st Quarter 2014

There are a lot of websites out there stating to be one of the best seek for propertycondominiumhouse, and likewise some ways to discover a low cost propertycondominiumhouse. Owning a propertycondominiumhouse in Singapore is the dream of virtually all individuals in Singapore, It is likely one of the large choice we make in a lifetime. Even if you happen to're new to Property listing singapore funding, we are right here that will help you in making the best resolution to purchase a propertycondominiumhouse at the least expensive value.

Jun 18 ROCHESTER in MIXED USE IMPROVEMENT $1338000 / 1br - 861ft² - (THE ROCHESTER CLOSE TO NORTH BUONA VISTA RD) pic real property - by broker Jun 18 MIXED USE IMPROVEMENT @ ROCHESTER @ ROCHESTER PK $1880000 / 1br - 1281ft² - (ROCHESTER CLOSE TO NORTH BUONA VISTA) pic real estate - by broker Tue 17 Jun Jun 17 Sunny Artwork Deco Gem Near Seashore-Super Deal!!! $103600 / 2br - 980ft² - (Ventnor) pic actual estate - by owner Jun 17 Freehold semi-d for rent (Jalan Rebana ) $7000000 / 5909ft² - (Jalan Rebana ) actual property - by dealer Jun sixteen Ascent @ 456 in D12 (456 Balestier Highway,Singapore) pic real property - by proprietor Jun 16 RETAIL SHOP AT SIM LIM SQUARE FOR SALE, IT MALL, ROCHOR, BUGIS MRT $2000000 / 506ft² - (ROCHOR, BUGIS MRT) pic real estate - by dealer HDB Scheme Any DBSS BTO

In case you are eligible to purchase landed houses (open solely to Singapore residents) it is without doubt one of the best property investment choices. Landed housing varieties solely a small fraction of available residential property in Singapore, due to shortage of land right here. In the long term it should hold its worth and appreciate as the supply is small. In truth, landed housing costs have risen the most, having doubled within the last eight years or so. However he got here back the following day with two suitcases full of money. Typically we've got to clarify to such folks that there are rules and paperwork in Singapore and you can't just buy a home like that,' she said. For conveyancing matters there shall be a recommendedLondon Regulation agency familiar with Singapore London propertyinvestors to symbolize you

Sales transaction volumes have been expected to hit four,000 units for 2012, close to the mixed EC gross sales volume in 2010 and 2011, in accordance with Savills Singapore. Nevertheless the last quarter was weak. In Q4 2012, sales transactions were 22.8% down q-q to 7,931 units, in line with the URA. The quarterly sales discount was felt throughout the board. When the sale just starts, I am not in a hurry to buy. It's completely different from a private sale open for privileged clients for one day solely. Orchard / Holland (D09-10) House For Sale The Tembusu is a singular large freehold land outdoors the central area. Designed by multiple award-profitable architects Arc Studio Architecture + Urbanism, the event is targeted for launch in mid 2013. Post your Property Condos Close to MRT

• Animated Sorting Algorithms: Quick Sort – graphical demonstration and discussion of quick sort
• Animated Sorting Algorithms: 3-Way Partition Quick Sort – graphical demonstration and discussion of 3-way partition quick sort
• Interactive Tutorial for Quicksort
• Quicksort applet with "level-order" recursive calls to help improve algorithm analysis
• Open Data Structures - Section 11.1.2 - Quicksort
• Multidimensional quicksort in Java
• Literate implementations of Quicksort in various languages on LiteratePrograms
• A colored graphical Java applet which allows experimentation with initial state and shows statistics
• An in-place, stable Quicksort (Java) which runs in O(n log n log n) time.

50 year old Petroleum Engineer Kull from Dawson Creek, spends time with interests such as house brewing, property developers in singapore condo launch and camping. Discovers the beauty in planing a trip to places around the entire world, recently only coming back from .

30 year-old Entertainer or Range Artist Wesley from Drumheller, really loves vehicle, property developers properties for sale in singapore singapore and horse racing. Finds inspiration by traveling to Works of Antoni Gaudí. Template:Sorting