Gauss's law for gravity

From formulasearchengine
Revision as of 18:21, 5 August 2013 by en>Milad pourrahmani (Integral form)
Jump to navigation Jump to search

Free spectral range (FSR) is the spacing in optical frequency or wavelength between two successive reflected or transmitted optical intensity maxima or minima of an interferometer or diffractive optical element.

The FSR is not always represented by Δν or Δλ, but instead is some times only represented by the letters FSR. The reason is because these difference terms often refer to the bandwidth or linewidth of an emitted source respectively.

In General

The free spectral range(FSR) of a cavity is given by:

Δν=c2ngl

Where l is the length of the cavity, ng is the group index of the media within the cavity and c is the speed of light.

In wavelength, the FSR is given by:

Δλ=λ22ngl

Where λ is the wavelength of light in the cavity.

Diffraction gratings

The free spectral range of a diffraction grating is the largest wavelength range for a given order that does not overlap the same range in an adjacent order. If the (m+1)th order of λ and (m)th order of (λ+Δλ) lie at the same angle, then

Δλ=λm

Fabry–Pérot interferometer

In a Fabry–Pérot interferometer or etalon, the wavelength separation between adjacent transmission peaks is called the free spectral range of the etalon, and is given by:

Δλ=λ022nlcosθ+λ0λ022nlcosθ

where λ0 is the central wavelength of the nearest transmission peak, n is the index of refraction of the cavity medium, θ is the angle of incidence, and l is the thickness of the cavity. More often FSR is quoted in frequency, rather than wavelength units:

Δfc2nlcosθ
The transmission of an etalon as a function of wavelength. A high-finesse etalon (red line) shows sharper peaks and lower transmission minima than a low-finesse etalon (blue). The free spectral range is Δλ (shown above the graph).

The FSR is related to the full-width half-maximum, δλ, of any one transmission band by a quantity known as the finesse:

=Δλδλ=π2arcsin(1/F),

where F=4R(1R)2 is the coefficient of finesse, and R is the reflectivity of the mirrors.

This is commonly approximated (for R > 0.5) by

πF2=πR1/2(1R).

Template:Optics-stub