Steroid 15beta-monooxygenase

The ratio estimator is a statistical parameter and is defined to be the ratio of means of two variates. Ratio estimates are biased and corrections must be made when they are used in experimental or survey work. The ratio estimates are asymmetrical and symmetrical tests such as the t test should not be used to generate confidence intervals.

It is also worth noting that the bias is of the order O(1/n) (see big O notation) so as the sample size (n) increases, the bias will asymptotically approach 0. Therefore, the estimator is approximately unbiased for large sample sizes.

Definition

Assume there are two characteristics – x and y – that can be observed for each sampled element in the data set. The ratio R is

$R={\overline{\mu }}_y/{\overline{\mu }}_x$

The ratio estimate of a value of the y variate (θ_y) is

${\theta }_y=R{\theta }_x$

where θ_x is the corresponding value of the x variate. θ_y is known to be asymptotically normally distributed.

Statistical properties

Fitter (General ) Cameron Broadbent from Stevensville, spends time with hobbies including metal detection, property developers in singapore and psychology. Finds encouragement by making vacation to Tomb of Askia.

Have a look at my page; condo for Sale The sample ratio (r) is estimated from the sample

$r=\frac{\overline{y}}{\overline{x}}=\frac{\sum _{i=1}^{n}y}{\sum _{i=1}^{n}x}$

That the ratio is biased can be shown with Jensen's inequality as follows:

$E\left(\frac{x}{y}\right)=E\left(x\frac{1}{y}\right)=E(x)E\left(\frac{1}{y}\right)\ge E(x)\frac{1}{E(y)}=\frac{E(x)}{E(y)}$

Under simple random sampling the bias is of the order O( n⁻¹ ). An upper bound on the relative bias of the estimate is provided by the coefficient of variation (the ratio of the standard deviation to the mean). Under simple random sampling the relative bias is O( n^-1/2 ).

Correction of the mean's bias

The correction methods, depending on the distributions of the x and y variates, differ in their efficiency making it difficult to recommend an overall best method. Because the estimates of r are biased a corrected version should be used in all subsequent calculations.

A correction of the bias accurate to the first order is

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=r-\frac{s_{[y/x]x}}{m_x}$

where m_x is the mean of the variate x and s_ab is the covariance between a and b.

To simplify the notation s_ab will be used subsequently to denote the covariance between the variates a and b.

Another estimator based on the Taylor expansion is

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=r+\frac{1}{n}(1-\frac{n-1}{N-1})\frac{r{s}_x^2-\rho s_x{s}_y}{m_x^2}$

where n is the sample size, N is the population size, m_x is the mean of the variate x, s_x² and s_y² are the sample variances of the x and y variates respectively and ρ is the sample correlation between the x and y variates.

A computationally simpler but slightly less accurate version of this estimator is

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=r-\frac{N-n}{N}\frac{(r{s}_x^2-\rho s_x{s}_y)}{n{m}_x^2}$

where N is the population size, n is the sample size, m_x is the mean of the x variate, s_x² and s_y² are the sample variances of the x and y variates respectively and ρ is the sample correlation between the x and y variates. These versions differ only in the factor in the denominator ( N - 1 ). For a large N the difference is negligible.

A second-order correction is

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=r[1+\frac{1}{n}(\frac{1}{m_x}-\frac{s_{xy}}{m_x{m}_y})+\frac{1}{n^2}(\frac{2}{m_x^2}-\frac{s_{xy}}{m_x{m}_y}[2+\frac{3}{m_x}]+\frac{s_{x^{2}y}}{m_x^2{m}_y})]$

Other methods of bias correction have also been proposed. To simplify the notation the following variables will be used

$\theta =\frac{1}{n}-\frac{1}{N}$

$c_x^2=\frac{s_x^2}{m_x^2}$

$c_{xy}=\frac{s_{xy}}{m_x{m}_y}$

Pascual's estimator:

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=r+\frac{N-1}{N}\frac{m_y-r{m}_x}{n-1}$

Beale's estimator:

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=r\frac{1+\theta c_{xy}}{1+\theta c_x^2}$

Tin's estimator:

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=r(1+\theta (c_{xy}-c_x^2))$

Sahoo's estimator:

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=\frac{r}{1+\theta (c_x^2-c_{xy})}$

Sahoo has also proposed a number of additional estimators:

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=r(1+\theta c_{xy})(1-\theta c_x^2)$

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=\frac{r(1-\theta c_x^2)}{1-\theta c_{xy}}$

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=\frac{r}{(1+\theta c_{xy})(1+\theta c_x^2)}$

If m_x and m_y are both greater than 10, then the following approximation is correct to order O( n⁻³ ).

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=r[1-\frac{2}{n^2{m}_x}(\frac{1}{m_x}-\frac{s_{xy}}{m_x{m}_y})(1+\frac{13}{2n}+\frac{8}{n{m}_x})]$

An asymptotically correct estimator is

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=r+c_x^2\frac{m_y}{m_x}-\frac{s_{xy}}{m_x^2}$

Jackknife estimation

A jackknife estimate of the ratio is less biased that the naive form. A jackknife estimator of the ratio is

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=nr-\frac{n-1}{n}\sum _{i\ne j1}^n{r}_i$

where n is the size of the sample and the r_i are estimated with the omission of one pair of variates at a time.

An alternative method is to divide the sample into g groups each of size p with n = pg. Let r_i be the estimate of the i^th group. Then the estimator

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=gr-\frac{g-1}{g}\sum _{i=1}^g{r}_i$

has a bias of at most O( n⁻² ).

Other estimators based on the division of the sample into g groups are:

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=\frac{g}{g+1}r-\frac{1}{g(g-1)}\sum _{i=1}^g{r}_i$

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=\overline{r}+\frac{n}{n-1}\frac{m_y-\overline{r}{m}_x}{m_x}$

$r_{\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{r}}=\overline{r_g}+\frac{g(m_y-\overline{r_g}{m}_x)}{m_x}$

where $\overline{r}$ is the mean of the ratios r_g of the g groups and

$\overline{r_g}=\sum \frac{r_i^{\text{'}}}{g}$

where r_i^' is the value of the sample ratio with the i^th group omitted.

Other methods of estimation

Other methods of estimating a ratio estimator include maximum likelihood and bootstrapping.

Estimate of total

The estimated total of the y variate ( τ_y ) is

${\tau }_y=r{\tau }_x$

where ( τ_x ) is the total of the x variate.

Variance estimates

The variance of the sample ratio is approximately:

$\mathrm{var}(r)=\frac{1}{s_x^2+m_x^2}[(s_y^2-s_{x^2[y^2/x^2]})-(s_{x[y/x]}{)}^2+2m_y{s}_{x[y/x]}-\frac{s_x^2}{m_x^2}(m_y-s_{x[y/x]}^2)]$

where s_x² and s_y² are the variances of the x and y variates respectively, m_x and m_y are the means of the x and y variates respectively and s_ab is the covariance of a and b.

Although the approximate variance estimator of the ratio given below is biased, if the sample size is large, the bias in this estimator is negligible.

$\mathrm{var}(r)=\frac{N-n}{N}\frac{1}{m_x^2}\frac{\sum _{i=1}^n(y_i-r{x}_i)}{n-1}$

where N is the population size, n is the sample size and m_x is the mean of the x variate.

Another estimator of the variance based on the Taylor expansion is

$\mathrm{var}(r)=\frac{1}{n}(1-\frac{n-1}{N-1})\frac{r^2{s}_x^2+s_y^2-2r\rho s_x{s}_y}{m_x^2})$

where n is the sample size, N is the population size and ρ is the correlation coefficient between the x and y variates.

An estimate accurate to O( n⁻² ) is

$\mathrm{var}(r)=\frac{1}{n}[\frac{s_y^2}{m_x^2}+\frac{m_y^2{s}_x^2}{m_x^4}-\frac{2m_y{s}_{xy}}{m_x^3}]$

An estimator accurate to O( n⁻³ ) is

$\mathrm{var}(r)=r^2[\frac{1}{n}(\frac{1}{m_x}+\frac{1}{m_y}-\frac{2s_{xy}}{m_x{m}_y})+\frac{1}{n^2}(\frac{6}{m_x^2}+\frac{3}{m_x{m}_y}+s_{xy}[\frac{4}{m_y^2}-\frac{8}{m_x{m}_y}-\frac{16}{m_x^2{m}_y}+\frac{5s_{xy}}{m_x^2{m}_y^2}]+\frac{4s_{x^{2}y}}{m_x^2{m}_y}-\frac{2s_{x{y}^2}}{m_x{m}_y^2})]$

A jackknife estimator of the variance is

$\mathrm{var}(r)=\frac{1}{n(n-1)}\sum _{i\ne j}^n(r_i-r_J)$

where r_i is the ratio with the i^th pair of variates omitted and r_J is the jackknife estimate of the ratio.

Variance of total

The variance of the estimated total is

$\mathrm{var}({\tau }_y)={\tau }_y^2\mathrm{var}(r)$

Variance of mean

The variance of the estimated mean of the y variate is

$\mathrm{var}(\overline{y})=m_x^2\mathrm{var}(r)=\frac{N-n}{N}\frac{1}{m_x^2}\frac{\sum _{i=1}^n(y_i-r{x}_i)}{n-1}=\frac{N-n}{N}\frac{(s_y^2+r^2{s}_x^2-2r\rho s_x{s}_y)}{n}$

where m_x is the mean of the x variate, s_x² and s_y² are the sample variances of the x and y variates respectively and ρ is the sample correlation between the x and y variates.

Skewness

The skewness and the kurtosis of the ratio depend on the distributions of the x and y variates. Estimates have been made of these parameters for normally distributed x and y variates but for other distributions no expressions have yet been derived. It has been found that in general ratio variables are skewed to the right, are leptokurtic and their nonnormality is increased when magnitude of the denominator's coefficient of variation is increased.

For normally distributed x and y variates the skewness of the ratio is approximately

$\gamma =\left(\frac{m_y\omega }{\sqrt{n{m}_x{m}_y{\omega }^2+m_x^2{m}_y}}\right)(6+\frac{1}{n{m}_x}[44+\frac{1}{1+{\omega }^2{m}_y/m_x}])$

where

$\omega =1-m_x\mathrm{cov}(x,y)$

Effect on confidence intervals

Because the ratio estimate is generally skewed confidence intervals created with the variance and symmetrical tests such as the t test are incorrect. These confidence intervals tend to overestimate the size of the left confidence interval and underestimate the size of the right.

If the ratio estimator is unimodal (which is frequently the case) then a conservative estimate of the 95% confidence intervals can be made with the Vysochanskiï–Petunin inequality.

Alternative methods of bias reduction

An alternative method of reducing or eliminating the bias in the ratio estimator is to alter the method of sampling. The variance of the ratio using these methods differs from the estimates given previously.

Lahiri's method

Lahiri introduced the first of these sampling schemes in 1951.

Choose a number M ≥ max( x₁, ..., x_N) where N is the population size. Chose one of these elements (x_i). Chose u at random from a uniform distribution U(0, 1). If uM ≤ x_i, then x_i is retained in the sample. If not then it is rejected and a new element is chosen. Repeat this process N times. The same process is carried out with the y variate. Then the ratio of the sum of the y variates and the sum of the x variates chosen in this fashion is an unbiased estimate of the ratio estimator.

In symbols we have

$r=\frac{\sum y_i}{\sum x_i}$

where x_i and y_i are chosen according to the scheme described above.

Midzuno-Sen's method

In 1952 Midzuno and Sen independently described a sampling scheme that provides an unbiased estimator of the ratio.

The first sample is chosen with probability proportional to the size of the x variate. The remaining n - 1 samples are chosen at random without replacement from the remaining N - 1 members in the population. The probability of selection under this scheme is

$P=\frac{\sum x_i}{(\genfrac{}{}{0ex}{}{N-1}{n-1})X}$

where X is the sum of the N x variates and the x_i are the n members of the sample.

The ratio estimator given by this scheme is unbiased.

Ordinary least squares regression

If a linear relationship between the x and y variates exists and the regression equation passes through the origin then the estimated variance of the regression equation is always less than that of the ratio estimator. The precise relationship between the variances depends on the linearity of the relationship between the x and y variates: when the relationship is other than linear the ratio estimate may have a lower variance than that estimated by regression.

Uses

Although the ratio estimator may be of use in a number of settings it is of particular use in two cases:

• when the variates x and y are highly correlated through the origin

• when the total population size is unknown

History

The first known use of the ratio estimator was by John Graunt in England who in 1662 was the first to estimate the ratio y/x where y represented the total population and x the known total number of registered births in the same areas during the preceding year.

Later Messance (~1765) and Moheau (1778) published very carefully prepared estimates for France based on enumeration of population in certain districts and on the count of births, deaths and marriages as reported for the whole country. The districts from which the ratio of inhabitants to birth was determined only constituted a sample.

In 1802 Laplace wished to estimate the population of France. No population census had been carried out and Laplace lacked the resources to count every individual. Instead he sampled 30 parishes whose total number of inhabitants was 2,037,615. The parish baptismal registrations were considered to be reliable estimates of the number of live births so he used the total number of births over a three year period. The sample estimate was 71,866.333 baptisms per year over this period giving a ratio of one registered baptism for every 28.35 persons. The total number of baptismal registrations for France was also available to him and he assumed that the ratio of live births to population was constant. He then used the ratio from his sample to estimate the population of France.

Karl Pearson noted in 1897 that the ratio estimates are biased and cautioned against their use.

See also

• Ratio distribution

References

43 year old Petroleum Engineer Harry from Deep River, usually spends time with hobbies and interests like renting movies, property developers in singapore new condominium and vehicle racing. Constantly enjoys going to destinations like Camino Real de Tierra Adentro.