Prior probability

In analytical mechanics, specifically the study of the rigid body dynamics of multibody systems, the term generalized coordinates refers to the parameters that describe the configuration of the system relative to some reference configuration. These parameters must uniquely define the configuration of the system relative to the reference configuration. The generalized velocities are the time derivatives of the generalized coordinates of the system.

An example of a generalized coordinate is the angle that locates a point moving on a circle. The adjective "generalized" distinguishes these parameters from the traditional use of the term coordinate to refer to Cartesian coordinates: for example, describing the location of the point on the circle using x and y coordinates.

Although there may be many choices for generalized coordinates for a physical system, parameters are usually selected which are convenient for the specification of the configuration of the system and which make the solution of its equations of motion easier. If these parameters are independent of one another, then number of independent generalized coordinates is defined by the number of degrees of freedom of the system.

Constraint equations

File:Generalized coordinates 1df.svg

Generalized coordinates for one degree of freedom (of a particle moving in a complicated path). Instead of using all three Cartesian coordinates x, y, z (or other standard coordinate systems), only one is needed and is completely arbitrary to define the position. Four possibilities are shown. Top: distances along some fixed line, bottom left: an angle relative to some baseline, bottom right: the arc length of the path the particle takes. All are defined relative to a zero position - again arbitrarily defined.

Generalized coordinates are usually selected to provide the minimum number of independent coordinates that define the configuration of a system, which simplifies the formulation of Lagrange's equations of motion. However, it can also occur that a useful set of generalized coordinates may be dependent, which means that they are related by one or more constraint equations.

Holonomic constraints

If the constraints introduce relations between the generalized coordinates q_i, i=1,..., n and time, of the form,

$f_{j}(q_{1},...,q_{n},t)=0,j=1,...,k,$

are called holonomic. These constraint equations define a manifold in the space of generalized coordinates q_i, i=1,...,n, known as the configuration manifold of the system. The degree of freedom of the system is d=n-k, which is the number of generalized coordinates minus the number of constraints.Primarily based on the most recent URA personal property value index (PPPI) flash estimates, we know that the PPPI, which represents the overall real property price development, has dipped in 2013Q4. That is the first dip the market has seen within the final 2 years.

To give you some perspective, the entire number of personal properties in Singapore (together with govt condominiums) is 297,689 in 2013Q3. Primarily based on the projection that there will be 19,302 units accomplished in 2014, the rise in residential models works out to be more than 6%. With a lot New Ec Launch Singapore provide, buyers might be spoilt for alternative and this in flip will lead to their reluctance to pay a premium for potential models. The complete textual content of the Copyright Act (Cap sixty three) and different statutes regarding IPR might be found on the Singapore Statutes Online Website online The Group's income jumped forty.1 p.c to $324.5 million from $231.6 million in FY 2013, lifted by increased development income and sales of growth properties in Singapore and China. Actual Estate Shopping for

One factor we've on this nation is a big group of "economists," and "market analysts." What's interesting about this group of real property market-watchers is that there are two very other ways wherein they predict Boomers will affect housing markets over the subsequent decade. Let's check out those two opposites and see how every can change the best way real property investors strategy their markets. The good news is that actual property buyers are prepared for either state of affairs, and there's profit in being ready. I'm excited and searching ahead to the alternatives both or each of these conditions will supply; thank you Boomers! Mapletree to further broaden past Asia Why fortune will favour the brave in Asia's closing real property frontier

The story of the 23.2 home begins with a stack of Douglas fir beams salvaged from varied demolished warehouses owned by the consumer's household for a number of generations. Design and structure innovator Omer Arbel, configured them to type a triangulated roof, which makes up one of the placing features of the home. The transient from the entrepreneur-proprietor was not solely to design a house that integrates antique wood beams, however one which erases the excellence between inside and exterior. Built on a gentle slope on a large rural acreage surrounded by two masses of previous-development forests, the indoors movement seamlessly to the outdoors and, from the within looking, one enjoys unobstructed views of the existing natural panorama which is preserved

First, there are typically extra rental transactions than gross sales transactions, to permit AV to be decided for each property primarily based on comparable properties. Second, movements in sale costs are more unstable than leases. Hence, utilizing rental transactions to derive the AV helps to maintain property tax more steady for property homeowners. If you're buying or trying to lease a property. It's tiring to call up individual property agent, organize appointments, coordinate timing and to go for particular person property viewing. What most individuals do is to have a property agent representing them who will arrange and coordinate the viewings for all the properties out there based mostly on your necessities & most well-liked timing. Rent Property District 12 Rent Property District thirteen

The Annual Worth of a property is mostly derived based mostly on the estimated annual hire that it may well fetch if it have been rented out. In determining the Annual Worth of a property, IRAS will think about the leases of similar properties within the vicinity, dimension and condition of the property, and different relevant components. The Annual Worth of a property is determined in the identical method regardless of whether the property is let-out, proprietor-occupied or vacant. The Annual Worth of land is determined at 5% of the market price of the land. When a constructing is demolished, the Annual Worth of the land is assessed by this method. Property Tax on Residential Properties Buyer Stamp Responsibility on Buy of Properties – Business and residential properties Rent House District 01

Within the event the Bank's valuation is decrease than the acquisition price, the purchaser has to pay the distinction between the purchase value and the Bank's valuation utilizing money. As such, the money required up-front might be increased so it's at all times essential to know the valuation of the property before making any offer. Appoint Lawyer The Bank will prepare for a proper valuation of the property by way of physical inspection The completion statement will present you the balance of the acquisition price that you must pay after deducting any deposit, pro-rated property tax and utility costs, upkeep prices, and different relevant expenses in addition to any fees payable to the agent and the lawyer. Stamp Responsibility Primarily based on the Purchase Price or Market Value, whichever is larger

It can be advantageous to choose independent generalized coordinates, as is done in Lagrangian mechanics, because this eliminates the need for constraint equations. However, in some situations, it is not possible to identify an unconstrained set. For example, when dealing with nonholonomic constraints or when trying to find the force due to any constraint—holonomic or not, dependent generalized coordinates must be employed. Sometimes independent generalized coordinates are called internal coordinates because they are mutually independent, otherwise unconstrained, and together give the position of the system.

Top: one degree of freedom, bottom: two degrees of freedom, left: an open curve F (parameterized by t) and surface F, right: a closed curve C and closed surface S. The equations shown are the constraint equations. Generalized coordinates are chosen and defined with respect to these curves (one per degree of freedom), and simplify the analysis since even complicated curves are described by the minimum number of coordinates required.

Non-holonomic constraints

A mechanical system can involve constraints on both the generalized coordinates and their derivatives. Constraints of this type are known as non-holonomic, and have the form

$g_{j}(q_{1},...,q_{n},{\dot {q}}_{1},...,{\dot {q}}_{n},t)=0,j=1,....,k.$

An example of a non-holonomic constraint is a rolling wheel or knife-edge that constrains the direction of the velocity vector.

Example: Simple pendulum

Dynamic model of a simple pendulum.

The relationship between the use of generalized coordinates and Cartesian coordinates to characterize the movement of a mechanical system can be illustrated by considering the constrained dynamics of a simple pendulum.

A simple pendulum consists of a mass M hanging from a pivot point so that it is constrained to move on a circle of radius L. The position of the mass is defined by the coordinate vector r=(x, y) measured in the plane of the circle such that y is in the vertical direction. The coordinates x and y are related by the equation of the circle

$f(x,y)=x^{2}+y^{2}-L^{2}=0,$

that constrains the movement of M. This equation also provides a constraint on the velocity components,

${\dot {f}}(x,y)=2x{\dot {x}}+2y{\dot {y}}=0.$

Now introduce the parameter θ, that defines the angular position of M from the vertical direction. It can be used to define the coordinates x and y, such that

$\mathbf {r} =(x,y)=(L\sin \theta ,-L\cos \theta ).$

The use of θ to define the configuration of this system avoids the constraint provided by the equation of the circle.

Virtual work

Notice that the force of gravity acting on the mass m is formulated in the usual Cartesian coordinates,

$\mathbf {F} =(0,-mg),$

where g is the acceleration of gravity.

The virtual work of gravity on the mass m as it follows the trajectory r is given by

$\delta W=\mathbf {F} \cdot \delta \mathbf {r} .$

The variation δr can be computed in terms of the coordinates x and y, or in terms of the parameter θ,

$\delta \mathbf {r} =(\delta x,\delta y)=(L\cos \theta ,L\sin \theta )\delta \theta .$

Thus, the virtual work is given by

$\delta W=-mg\delta y=-mgL\sin \theta \delta \theta .$

Notice that the coefficient of δy is the y-component of the applied force. In the same way, the coefficient of δθ is known as the generalized force along generalized coordinate θ, given by

$F_{\theta }=-mgL\sin \theta .$

Kinetic energy

To complete the analysis consider the kinetic energy T of the mass, using the velocity,

$\mathbf {v} =({\dot {x}},{\dot {y}})=(L\cos \theta ,L\sin \theta ){\dot {\theta }},$

so,

$T={\frac {1}{2}}m\mathbf {v} \cdot \mathbf {v} ={\frac {1}{2}}m({\dot {x}}^{2}+{\dot {y}}^{2})={\frac {1}{2}}mL^{2}{\dot {\theta }}^{2}.$

Lagrange's equations

Lagrange's equations for the pendulum in terms of the coordinates x and y are given by,

${\frac {d}{dt}}{\frac {\partial T}{\partial {\dot {x}}}}-{\frac {\partial T}{\partial x}}=F_{x}+\lambda {\frac {\partial f}{\partial x}},\quad {\frac {d}{dt}}{\frac {\partial T}{\partial {\dot {y}}}}-{\frac {\partial T}{\partial y}}=F_{y}+\lambda {\frac {\partial f}{\partial y}}.$

This yields the three equations

$m{\ddot {x}}=\lambda (2x),\quad m{\ddot {y}}=-mg+\lambda (2y),\quad x^{2}+y^{2}-L^{2}=0,$

in the three unknowns, x, y and λ.

Using the parameter θ, Lagrange's equations take the form

${\frac {d}{dt}}{\frac {\partial T}{\partial {\dot {\theta }}}}-{\frac {\partial T}{\partial \theta }}=F_{\theta },$

which becomes,

$mL^{2}{\ddot {\theta }}=-mgL\sin \theta ,$

or

${\ddot {\theta }}+{\frac {g}{L}}\sin \theta =0.$

This formulation yields one equation because there is a single parameter and no constraint equation.

This shows that the parameter θ is a generalized coordinate that can be used in the same way as the Cartesian coordinates x and y to analyze the pendulum.

Example: Double pendulum

A double pendulum

The benefits of generalized coordinates become apparent with the analysis of a double pendulum. For the two masses m_i, i=1, 2, let r_i=(x_i, y_i), i=1, 2 define their two trajectories. These vectors satisfy the two constraint equations,

$f_{1}(x_{1},y_{1},x_{2},y_{2})=\mathbf {r} _{1}\cdot \mathbf {r} _{1}-L_{1}^{2}=0,\quad f_{2}(x_{1},y_{1},x_{2},y_{2})=(\mathbf {r} _{2}-\mathbf {r} _{1})\cdot (\mathbf {r} _{2}-\mathbf {r} _{1})-L_{2}^{2}=0.$

The formulation of Lagrange's equations for this system yields six equations in the four Cartesian coordinates x_i, y_i i=1, 2 and the two Lagrange multipliers λ_i, i=1, 2 that arise from the two constraint equations.

Coordinates

Now introduce the generalized coordinates θ_i i=1,2 that define the angular position of each mass of the double pendulum from the vertical direction. In this case, we have

$\mathbf {r} _{1}=(L_{1}\sin \theta _{1},-L_{1}\cos \theta _{1}),\quad \mathbf {r} _{2}=(L_{1}\sin \theta _{1},-L_{1}\cos \theta _{1})+(L_{2}\sin \theta _{2},-L_{2}\cos \theta _{2}).$

The force of gravity acting on the masses is given by,

$\mathbf {F} _{1}=(0,-m_{1}g),\quad \mathbf {F} _{2}=(0,-m_{2}g)$

where g is the acceleration of gravity. Therefore, the virtual work of gravity on the two masses as they follow the trajectories r_i, i=1,2 is given by

$\delta W=\mathbf {F} _{1}\cdot \delta \mathbf {r} _{1}+\mathbf {F} _{2}\cdot \delta \mathbf {r} _{2}.$

The variations δr_i i=1, 2 can be computed to be

$\delta \mathbf {r} _{1}=(L_{1}\cos \theta _{1},L_{1}\sin \theta _{1})\delta \theta _{1},\quad \delta \mathbf {r} _{2}=(L_{1}\cos \theta _{1},L_{1}\sin \theta _{1})\delta \theta _{1}+(L_{2}\cos \theta _{2},L_{2}\sin \theta _{2})\delta \theta _{2}$

Virtual work

Thus, the virtual work is given by

$\delta W=-(m_{1}+m_{2})gL_{1}\sin \theta _{1}\delta \theta _{1}-m_{2}gL_{2}\sin \theta _{2}\delta \theta _{2},$

and the generalized forces are

$F_{\theta _{1}}=-(m_{1}+m_{2})gL\sin \theta _{1},\quad F_{\theta _{2}}=-m_{2}gL\sin \theta _{2}.$

Kinetic energy

Compute the kinetic energy of this system to be

$T={\frac {1}{2}}m_{1}\mathbf {v} _{1}\cdot \mathbf {v} _{1}+{\frac {1}{2}}m_{2}\mathbf {v} _{2}\cdot \mathbf {v} _{2}={\frac {1}{2}}(m_{1}+m_{2})L_{1}^{2}{\dot {\theta }}_{1}^{2}+{\frac {1}{2}}m_{2}L_{2}^{2}{\dot {\theta }}_{2}^{2}+m_{2}L_{1}L_{2}\cos(\theta _{2}-\theta _{1}){\dot {\theta }}_{1}{\dot {\theta }}_{2}.$

Lagrange's equations

Lagrange's equations yield two equations in the unknown generalized coordinates θ_i i=1, 2, given by

$(m_{1}+m_{2})L_{1}{\ddot {\theta }}_{1}+m_{2}L_{1}L_{2}{\ddot {\theta }}_{2}\cos(\theta _{2}-\theta _{1})+m_{2}L_{1}L_{2}\sin(\theta _{2}-\theta _{1})=-(m_{1}+m_{2})gL_{1}\sin \theta _{1},$

and

$m_{2}L_{2}{\ddot {\theta }}^{2}+m_{2}L_{1}L_{2}{\ddot {\theta }}_{1}\cos(\theta _{2}-\theta _{1})-m_{2}L_{1}L_{2}\sin(\theta _{2}-\theta _{1})=-m_{2}gL_{2}\sin \theta _{2}.$

The use of the generalized coordinates θ_i i=1, 2 provides an alternative to the Cartesian formulation of the dynamics of the double pendulum.

Generalized coordinates and virtual work

The principle of virtual work states that if a system is in static equilibrium, the virtual work of the applied forces is zero for all virtual movements of the system from this state, that is, δW=0 for any variation δr. When formulated in terms of generalized coordinates, this is equivalent to the requirement that the generalized forces for any virtual displacement are zero, that is F_i=0.

Let the forces on the system be F_j, j=1, ..., m be applied to points with Cartesian coordinates r_j, j=1,..., m, then the virtual work generated by a virtual displacement from the equilibrium position is given by

$\delta W=\sum _{j=1}^{m}\mathbf {F} _{j}\cdot \delta \mathbf {r} _{j}.$

where δr_j, j=1, ..., m denote the virtual displacements of each point in the body.

Now assume that each δr_j depends on the generalized coordinates q_i, i=1, ..., n, then

$\delta \mathbf {r} _{j}={\frac {\partial \mathbf {r} _{j}}{\partial q_{1}}}\delta {q}_{1}+\ldots +{\frac {\partial \mathbf {r} _{j}}{\partial q_{n}}}\delta {q}_{n},$

and

$\delta W=\left(\sum _{j=1}^{m}\mathbf {F} _{j}\cdot {\frac {\partial \mathbf {r} _{j}}{\partial q_{1}}}\right)\delta {q}_{1}+\ldots +\left(\sum _{j=1}^{m}\mathbf {F} _{j}\cdot {\frac {\partial \mathbf {r} _{j}}{\partial q_{n}}}\right)\delta {q}_{n}.$

The n terms

$F_{i}=\sum _{j=1}^{m}\mathbf {F} _{j}\cdot {\frac {\partial \mathbf {r} _{j}}{\partial q_{i}}},\quad i=1,\ldots ,n,$

are the generalized forces acting on the system. Kane shows that these generalized forces can also be formulated in terms of the ratio of time derivatives,

$F_{i}=\sum _{j=1}^{m}\mathbf {F} _{j}\cdot {\frac {\partial \mathbf {v} _{j}}{\partial {\dot {q}}_{i}}},\quad i=1,\ldots ,n,$

where v_j is the velocity of the point of application of the force F_j.

In order for the virtual work to be zero for an arbitrary virtual displacement, each of the generalized forces must be zero, that is

$\delta W=0\quad \Rightarrow \quad F_{i}=0,i=1,\ldots ,n.$

See also

• Hamiltonian mechanics
• Virtual work
• Orthogonal coordinates
• Curvilinear coordinates
• Frenet-Serret formulas
• Mass matrix
• Stiffness matrix
• Generalized forces