Fourier transform
{{#invoke: Gallery  gallery}}
Template:Fourier transforms The Fourier transform decomposes a function of time (a signal) into the frequencies that make it up, similarly to how a musical chord can be expressed as the amplitude (or loudness) of its constituent notes. The Fourier transform of a function of time itself is a complexvalued function of frequency, whose absolute value represents the amount of that frequency present in the original function, and whose complex argument is the phase offset of the basic sinusoid in that frequency. The Fourier transform is called the frequency domain representation of the original signal. The term Fourier transform refers to both the frequency domain representation and the mathematical operation that associates the frequency domain representation to a function of time. The Fourier transform is not limited to functions of time, but in order to have a unified language, the domain of the original function is commonly referred to as the time domain. For many functions of practical interest one can define an operation that reverses this: the inverse Fourier transformation, also called Fourier synthesis, of a frequency domain representation combines the contributions of all the different frequencies to recover the original function of time.
Linear operations performed in one domain (time or frequency) have corresponding operations in the other domain, which are sometimes easier to perform. The operation of differentiation in the time domain corresponds to multiplication by the frequency,^{[note 1]} so some differential equations are easier to analyze in the frequency domain. Also, convolution in the time domain corresponds to ordinary multiplication in the frequency domain. Concretely, this means that any linear timeinvariant system, such as an electronic filter applied to a signal, can be expressed relatively simply as an operation on frequencies.^{[note 2]} So significant simplification is often achieved by transforming time functions to the frequency domain, performing the desired operations, and transforming the result back to time. Harmonic analysis is the systematic study of the relationship between the frequency and time domains, including the kinds of functions or operations that are "simpler" in one or the other, and has deep connections to almost all areas of modern mathematics.
Functions that are localized in the time domain have Fourier transforms that are spread out across the frequency domain and vice versa. The critical case is the Gaussian function, of substantial importance in probability theory and statistics as well as in the study of physical phenomena exhibiting normal distribution (e.g., diffusion), which with appropriate normalizations goes to itself under the Fourier transform. Joseph Fourier introduced the transform in his study of heat transfer, where Gaussian functions appear as solutions of the heat equation.
The Fourier transform can be formally defined as an improper Riemann integral, making it an integral transform, although this definition is not suitable for many applications requiring a more sophisticated integration theory.^{[note 3]} For example, many relatively simple applications use the Dirac delta function, which can be treated formally as if it were a function, but the justification requires a mathematically more sophisticated viewpoint.^{[1]} The Fourier transform can also be generalized to functions of several variables on Euclidean space, sending a function of 3dimensional space to a function of 3dimensional momentum (or a function of space and time to a function of 4momentum). This idea makes the spatial Fourier transform very natural in the study of waves, as well as in quantum mechanics, where it is important to be able to represent wave solutions either as functions either of space or momentum and sometimes both. In general, functions to which Fourier methods are applicable are complexvalued, and possibly vectorvalued.^{[2]} Still further generalization is possible to functions on groups, which, besides the original Fourier transform on ℝ or ℝ^{n} (viewed as groups under addition), notably includes the discretetime Fourier transform (DTFT, group = ℤ), the discrete Fourier transform (DFT, group = ℤ mod N) and the Fourier series or circular Fourier transform (group = S^{1}, the unit circle ≈ closed finite interval with endpoints identified). The latter is routinely employed to handle periodic functions. The Fast Fourier transform (FFT) is an algorithm for computing the DFT.
Definition
There are several common conventions for defining the Fourier transform of an integrable function Template:Harv, Template:Harv. This article will use the following definition:
 for any real number ξ.
When the independent variable x represents time (with SI unit of seconds), the transform variable ξ represents frequency (in hertz). Under suitable conditions, is determined by via the inverse transform:
The statement that can be reconstructed from is known as the Fourier inversion theorem, and was first introduced in Fourier's Analytical Theory of Heat Template:Harv, Template:Harv, although what would be considered a proof by modern standards was not given until much later Template:Harv. The functions and often are referred to as a Fourier integral pair or Fourier transform pair Template:Harv.
For other common conventions and notations, including using the angular frequency ω instead of the frequency ξ, see Other conventions and Other notations below. The Fourier transform on Euclidean space is treated separately, in which the variable x often represents position and ξ momentum.
Introduction
{{#invoke:see alsoseealso}}
The motivation for the Fourier transform comes from the study of Fourier series. In the study of Fourier series, complicated but periodic functions are written as the sum of simple waves mathematically represented by sines and cosines. The Fourier transform is an extension of the Fourier series that results when the period of the represented function is lengthened and allowed to approach infinity Template:Harv.
Due to the properties of sine and cosine, it is possible to recover the amplitude of each wave in a Fourier series using an integral. In many cases it is desirable to use Euler's formula, which states that e^{2πiθ} = cos(2πθ) + i sin(2πθ), to write Fourier series in terms of the basic waves e^{2πiθ}. This has the advantage of simplifying many of the formulas involved, and provides a formulation for Fourier series that more closely resembles the definition followed in this article. Rewriting sines and cosines as complex exponentials makes it necessary for the Fourier coefficients to be complex valued. The usual interpretation of this complex number is that it gives both the amplitude (or size) of the wave present in the function and the phase (or the initial angle) of the wave. These complex exponentials sometimes contain negative "frequencies". If θ is measured in seconds, then the waves e^{2πiθ} and e^{−2πiθ} both complete one cycle per second, but they represent different frequencies in the Fourier transform. Hence, frequency no longer measures the number of cycles per unit time, but is still closely related.
There is a close connection between the definition of Fourier series and the Fourier transform for functions f that are zero outside of an interval. For such a function, we can calculate its Fourier series on any interval that includes the points where f is not identically zero. The Fourier transform is also defined for such a function. As we increase the length of the interval on which we calculate the Fourier series, then the Fourier series coefficients begin to look like the Fourier transform and the sum of the Fourier series of f begins to look like the inverse Fourier transform. To explain this more precisely, suppose that T is large enough so that the interval [−T/2, T/2] contains the interval on which f is not identically zero. Then the nth series coefficient c_{n} is given by:
Comparing this to the definition of the Fourier transform, it follows that since f(x) is zero outside [−T/2,T/2]. Thus the Fourier coefficients are just the values of the Fourier transform sampled on a grid of width 1/T, multiplied by the grid width 1/T.
Under appropriate conditions, the Fourier series of f will equal the function f. In other words, f can be written:
where the last sum is simply the first sum rewritten using the definitions ξ_{n} = n/T, and Δξ = (n + 1)/T − n/T = 1/T.
This second sum is a Riemann sum, and so by letting T → ∞ it will converge to the integral for the inverse Fourier transform given in the definition section. Under suitable conditions this argument may be made precise Template:Harv.
In the study of Fourier series the numbers c_{n} could be thought of as the "amount" of the wave present in the Fourier series of f. Similarly, as seen above, the Fourier transform can be thought of as a function that measures how much of each individual frequency is present in our function f, and we can recombine these waves by using an integral (or "continuous sum") to reproduce the original function.
Example
The following images provide a visual illustration of how the Fourier transform measures whether a frequency is present in a particular function. The function depicted f(t) = cos(6πt) e^{−πt2} oscillates at 3 hertz (if t measures seconds) and tends quickly to 0. (The second factor in this equation is an envelope function that shapes the continuous sinusoid into a short pulse. Its general form is a Gaussian function). This function was specially chosen to have a real Fourier transform that can easily be plotted. The first image contains its graph. In order to calculate we must integrate e^{−2πi(3t)}f(t). The second image shows the plot of the real and imaginary parts of this function. The real part of the integrand is almost always positive, because when f(t) is negative, the real part of e^{−2πi(3t)} is negative as well. Because they oscillate at the same rate, when f(t) is positive, so is the real part of e^{−2πi(3t)}. The result is that when you integrate the real part of the integrand you get a relatively large number (in this case 0.5). On the other hand, when you try to measure a frequency that is not present, as in the case when we look at , you see that both real and imaginairy component of this function vary rapidly between positive and negative values, as plotted in the third image. Therefore in this case, the integrand oscillates fast enough so that the integral is very small and the value for the fourier transform for that frequency is nearly zero.
The general situation may be a bit more complicated than this, but this in spirit is how the Fourier transform measures how much of an individual frequency is present in a function f(t).
Properties of the Fourier transform
Here we assume f(x), g(x) and h(x) are integrable functions, are Lebesguemeasurable on the real line, and satisfy:
We denote the Fourier transforms of these functions by , and respectively.
Basic properties
The Fourier transform has the following basic properties: Template:Harv.
 Linearity
 For any complex numbers a and b, if h(x) = af(x) + bg(x), then
 Translation
 For any real number x_{0}, if then
 Modulation
 For any real number ξ_{0} if then
 Scaling
 For a nonzero real number a, if h(x) = f(ax), then The case a = −1 leads to the timereversal property, which states: if h(x) = f(−x), then
 In particular, if f is real, then one has the reality condition , that is, is a Hermitian function.
 Integration
That is, the evaluation of the Fourier transform in the origin () equals the integral of f all over its domain.
Invertibility and periodicity
Template:Rellink Under suitable conditions on the function f, it can be recovered from its Fourier transform Indeed, denoting the Fourier transform operator by so then for suitable functions, applying the Fourier transform twice simply flips the function: , which can be interpreted as "reversing time". Since reversing time is twoperiodic, applying this twice yields so the Fourier transform operator is fourperiodic, and similarly the inverse Fourier transform can be obtained by applying the Fourier transform three times: In particular the Fourier transform is invertible (under suitable conditions).
More precisely, defining the parity operator that inverts time, :
These equalities of operators require careful definition of the space of functions in question, defining equality of functions (equality at every point? equality almost everywhere?) and defining equality of operators – that is, defining the topology on the function space and operator space in question. These are not true for all functions, but are true under various conditions, which are the content of the various forms of the Fourier inversion theorem.
This fourfold periodicity of the Fourier transform is similar to a rotation of the plane by 90°, particularly as the twofold iteration yields a reversal, and in fact this analogy can be made precise. While the Fourier transform can simply be interpreted as switching the time domain and the frequency domain, with the inverse Fourier transform switching them back, more geometrically it can be interpreted as a rotation by 90° in the time–frequency domain (considering time as the xaxis and frequency as the yaxis), and the Fourier transform can be generalized to the fractional Fourier transform, which involves rotations by other angles. This can be further generalized to linear canonical transformations, which can be visualized as the action of the special linear group SL_{2}(R) on the time–frequency plane, with the preserved symplectic form corresponding to the uncertainty principle, below. This approach is particularly studied in signal processing, under time–frequency analysis.
Units and Duality
In mathematics, one often does not think of any units as being attached to the two variables and . But in physical applications, must have inverse units to the units of . For example, if is measured in seconds, should be in cycles per second for the formulas here to be valid. If the scale of is changed and is measured in units of seconds, then either must be in the socalled "angular frequency", or one must insert some constant scale factor into some of the formulas. If is measured in units of length, then must be in inverse length, e.g., wavenumbers. That is to say, there are two copies of the real line: one measured in one set of units, where ranges, and the other in inverse units to the units of , and which is the range of . So these are two distinct copies of the real line, and cannot be identified with each other. Therefore the Fourier transform goes from one space of functions to a different space of functions: functions which have a different domain of definition.
In general, must always be taken to be a linear form on the space of s, which is to say that the second real line is the dual space of the first real line. See the article on linear algebra for a more formal explanation and for more details. This point of view becomes essential in generalisations of the Fourier transform to general symmetry groups, including the case of Fourier series.
That there is no one preferred way (often, one says "no canonical way") to compare the two copies of the real line which are involved in the Fourier transformfixing the units on one line does not force the scale of the units on the other lineis the reason for the plethora of rival conventions on the definition of the Fourier transform. The various definitions resulting from different choices of units differ by various constants. If the units of are in seconds but the units of are in angular frequency, then the angular frequency variable is often denoted by one or another Greek letter, for example, is quite common. Thus (writing for the alternative definition and for the definition adopted in this article)
as before, but the corresponding alternative inversion formula would then have to be
To have something involving angular frequency but with greater symmetry between the Fourier transform and the inversion formula, one very often sees still another alternative definition of the Fourier transform, with a factor of , thus
and the corresponding inversion formula then has to be
Furthermore, there is no way to fix which square root of negative one will be meant by the symbol (it makes no sense to speak of "the positive square root" since only real numbers can be positive, similarly it makes no sense to say "rotation counterclockwise", because until is chosen, there is no fixed way to draw the complex plane), and hence one occasionally sees the Fourier transform written with in the exponent instead of , and vice versa for the inversion formula, a convention that is equally valid as the one chosen in this article, which is the more usual one.
For example, in probability theory, the characteristic function of the probability density function of a random variable of continuous type is defined without a negative sign in the exponential, and since the units of are ignored, there is no either:
(In probability theory, and in mathematical statistics, the use of the Fourier—Stieltjes transform is preferred, because so many random variables are not of continuous type, and do not possess a density function, and one must treat discontinuous distribution functions, i.e., measures which possess "atoms".)
From the higher point of view of group characters, which is much more abstract, all these arbitrary choices disappear, as will be explained in the later section of this article, on the notion of the Fourier transform of a function on an Abelian locally compact group.
Uniform continuity and the Riemann–Lebesgue lemma
The Fourier transform may be defined in some cases for nonintegrable functions, but the Fourier transforms of integrable functions have several strong properties.
The Fourier transform, , of any integrable function f is uniformly continuous and Template:Harv. By the Riemann–Lebesgue lemma Template:Harv,
However, need not be integrable. For example, the Fourier transform of the rectangular function, which is integrable, is the sinc function, which is not Lebesgue integrable, because its improper integrals behave analogously to the alternating harmonic series, in converging to a sum without being absolutely convergent.
It is not generally possible to write the inverse transform as a Lebesgue integral. However, when both f and are integrable, the inverse equality
holds almost everywhere. That is, the Fourier transform is injective on L^{1}(R). (But if f is continuous, then equality holds for every x.)
Plancherel theorem and Parseval's theorem
Let f(x) and g(x) be integrable, and let and be their Fourier transforms. If f(x) and g(x) are also squareintegrable, then we have Parseval's Formula Template:Harv:
where the bar denotes complex conjugation.
The Plancherel theorem, which follows from the above, states that Template:Harv
Plancherel's theorem makes it possible to extend the Fourier transform, by a continuity argument, to a unitary operator on L^{2}(R). On L^{1}(R)∩L^{2}(R), this extension agrees with original Fourier transform defined on L^{1}(R), thus enlarging the domain of the Fourier transform to L^{1}(R) + L^{2}(R) (and consequently to L^{p}(R) for 1 ≤ p ≤ 2). Plancherel's theorem has the interpretation in the sciences that the Fourier transform preserves the energy of the original quantity. The terminology of these formulas is not quite standardised. Parseval's theorem was proved only for Fourier series, and was first proved by Liapounoff. But Parseval's formula makes sense for the Fourier transform as well, and so even though in the context of the Fourier transform it was proved by Plancherel, it is still often referred to as Parseval's formula, or Parseval's relation, or even Parseval's theorem.
See Pontryagin duality for a general formulation of this concept in the context of locally compact abelian groups.
Poisson summation formula
{{#invoke:mainmain}}
The Poisson summation formula (PSF) is an equation that relates the Fourier series coefficients of the periodic summation of a function to values of the function's continuous Fourier transform. The Poisson summation formula says that for sufficiently regular functions ,
It has a variety of useful forms that are derived from the basic one by application of the Fourier transform's scaling and timeshifting properties. The formula has applications in engineering, physics, and number theory. The frequencydomain dual of the standard Poisson summation formula is also called the discretetime Fourier transform.
Poisson summation is generally associated with the physics of periodic media, such as heat conduction on a circle. The fundamental solution of the heat equation on a circle is called a theta function. It is used in number theory to prove the transformation properties of theta functions, which turn out to be a type of modular form, and it is connected more generally to the theory of automorphic forms where it appears on one side of the Selberg trace formula.
Convolution theorem
{{#invoke:mainmain}}
The Fourier transform translates between convolution and multiplication of functions. If f(x) and g(x) are integrable functions with Fourier transforms and respectively, then the Fourier transform of the convolution is given by the product of the Fourier transforms and (under other conventions for the definition of the Fourier transform a constant factor may appear).
This means that if:
where ∗ denotes the convolution operation, then:
In linear time invariant (LTI) system theory, it is common to interpret g(x) as the impulse response of an LTI system with input f(x) and output h(x), since substituting the unit impulse for f(x) yields h(x) = g(x). In this case, represents the frequency response of the system.
Conversely, if f(x) can be decomposed as the product of two square integrable functions p(x) and q(x), then the Fourier transform of f(x) is given by the convolution of the respective Fourier transforms and .
Crosscorrelation theorem
{{#invoke:mainmain}}
In an analogous manner, it can be shown that if h(x) is the crosscorrelation of f(x) and g(x):
then the Fourier transform of h(x) is:
As a special case, the autocorrelation of function f(x) is:
for which
Eigenfunctions
One important choice of an orthonormal basis for L^{2}(R) is given by the Hermite functions
where He_{n}(x) are the "probabilist's" Hermite polynomials, defined by
Under this convention for the Fourier transform, we have that
In other words, the Hermite functions form a complete orthonormal system of eigenfunctions for the Fourier transform on L^{2}(R) Template:Harv. However, this choice of eigenfunctions is not unique. There are only four different eigenvalues of the Fourier transform (±1 and ±i) and any linear combination of eigenfunctions with the same eigenvalue gives another eigenfunction. As a consequence of this, it is possible to decompose L^{2}(R) as a direct sum of four spaces H_{0}, H_{1}, H_{2}, and H_{3} where the Fourier transform acts on He_{k} simply by multiplication by i^{k}.
Since the complete set of Hermite functions provides a resolution of the identity, the Fourier transform can be represented by such a sum of terms weighted by the above eigenvalues, and these sums can be explicitly summed. This approach to define the Fourier transform was first done by Norbert Wiener Template:Harv. Among other properties, Hermite functions decrease exponentially fast in both frequency and time domains, and they are thus used to define a generalization of the Fourier transform, namely the fractional Fourier transform used in timefrequency analysis Template:Harv. In physics, this transform was introduced by Edward Condon Template:Harv.
The Fourier Transform in the Complex Domain
The integral for the Fourier transform
can be studied for complex values of its argument . Depending on the properties of , this might not converge off the real axis at all, or it might converge to a complex analytic function for all values of , or something in between. ^{[3]}
The PaleyWiener theorem says that is smooth (i.e., times differentiable for all positive integers ) and compactly supported if and only if is a holomorphic function for which there exists a constant such that for any integer ,
for some constant . (In this case, is supported on .) This can be expressed by saying that is an entire function which is rapidly decreasing in (for fixed ) and of exponential growth in (uniformly in ). ^{[4]}
(If is not smooth, but only $L^2$, the statement still holds provided .) ^{[5]} The space of such functions of a complex variable is called the PaleyWiener space. This theorem has been generalised to semisimple Lie groups. ^{[6]}
If is supported on the halfline , then is said to be "causal" because the impulse response function of a physically realisable filter must have this property, as no effect can precede its cause. Paley and Wiener showed that then extends to a holomorphic function on the complex lower halfplane which tends to zero as goes to infinity. ^{[7]} The converse is false and it is not known how to characterise the Fourier transform of a causal function. ^{[8]}
The Laplace Transform
The Fourier transform is intimately related with the Laplace transform , which is also used for the solution of differential equations and the analysis of filters. Chatfield, indeed, has said that "... the Laplace and the Fourier transforms [of a causal function] are the same, provided that the real part of is zero." ^{[9]}
It may happen that a function for which the Fourier integral does not converge on the real axis at all, nevertheless has a complex Fourier transform defined in some region of the complex plane.
For example, if is of exponential growth, i.e.,
for some constants , then ^{[10]}
convergent for all , is the twosided Laplace transform of .
The more usual version ("onesided") of the Laplace transform is
Thus, extending the Fourier transform to the complex domain means it includes the Laplace transform as a special casethe case of causal functionsbut with the change of variable .
Inversion
by Cauchy's integral theorem. Therefore, the Fourier inversion formula can use integration along different lines, parallel to the real axis. ^{[11]}
Theorem: If for , and for some constants , then
This theorem implies the Mellin inversion formula for the Laplace transformation, ^{[12]}
for any , where is the Laplace transform of .
The hypotheses can be weakened, as in the results of Carleman and Hunt, to being , provided that is in the interior of a closed interval on which is continuous and of bounded variation, and provided that the integrals are taken in the sense of Cauchy principal values. ^{[13]}
versions of these inversion formulas are also available.^{[14]}
Fourier transform on Euclidean space
The Fourier transform can be defined in any arbitrary number of dimensions n. As with the onedimensional case, there are many conventions. For an integrable function f(x), this article takes the definition:
where x and ξ are ndimensional vectors, and x · ξ is the dot product of the vectors. The dot product is sometimes written as .
All of the basic properties listed above hold for the ndimensional Fourier transform, as do Plancherel's and Parseval's theorem. When the function is integrable, the Fourier transform is still uniformly continuous and the Riemann–Lebesgue lemma holds. Template:Harv
Uncertainty principle
Template:Rellink Generally speaking, the more concentrated f(x) is, the more spread out its Fourier transform must be. In particular, the scaling property of the Fourier transform may be seen as saying: if we "squeeze" a function in x, its Fourier transform "stretches out" in ξ. It is not possible to arbitrarily concentrate both a function and its Fourier transform.
The tradeoff between the compaction of a function and its Fourier transform can be formalized in the form of an uncertainty principle by viewing a function and its Fourier transform as conjugate variables with respect to the symplectic form on the time–frequency domain: from the point of view of the linear canonical transformation, the Fourier transform is rotation by 90° in the time–frequency domain, and preserves the symplectic form.
Suppose f(x) is an integrable and squareintegrable function. Without loss of generality, assume that f(x) is normalized:
It follows from the Plancherel theorem that is also normalized.
The spread around x = 0 may be measured by the dispersion about zero Template:Harv defined by
In probability terms, this is the second moment of f(x)^{2} about zero.
The Uncertainty principle states that, if f(x) is absolutely continuous and the functions x·f(x) and f′(x) are square integrable, then
The equality is attained only in the case (hence ) where σ > 0 is arbitrary and so that f is L^{2}–normalized Template:Harv. In other words, where f is a (normalized) Gaussian function with variance σ^{2}, centered at zero, and its Fourier transform is a Gaussian function with variance σ^{−2}.
In fact, this inequality implies that:
for any x_{0}, ξ_{0} ∈ R Template:Harv.
In quantum mechanics, the momentum and position wave functions are Fourier transform pairs, to within a factor of Planck's constant. With this constant properly taken into account, the inequality above becomes the statement of the Heisenberg uncertainty principle Template:Harv.
A stronger uncertainty principle is the Hirschman uncertainty principle, which is expressed as:
where H(p) is the differential entropy of the probability density function p(x):
where the logarithms may be in any base that is consistent. The equality is attained for a Gaussian, as in the previous case.
Sine and cosine transforms
{{#invoke:mainmain}}
Fourier's original formulation of the transform did not use complex numbers, but rather sines and cosines. Statisticians and others still use this form. An absolutely integrable function for which Fourier inversion holds good can be expanded in terms of genuine frequencies (avoiding negative frequencies, which are sometimes considered hard to interpret physically^{[15]}) by
This is called an expansion as a trigonometric integral, or a Fourier integral expansion. The coefficient functions and can be found by using variants of the Fourier cosine transform and the Fourier sine transform (the normalisations are, again, not standardised):
and
Older literature refers to the two transform functions, the Fourier cosine transform, , and the Fourier sine transform, .
The function f can be recovered from the sine and cosine transform using
together with trigonometric identities. This is referred to as Fourier's integral formula.^{[16]}
Spherical harmonics
Let the set of homogeneous harmonic polynomials of degree k on R^{n} be denoted by A_{k}. The set A_{k} consists of the solid spherical harmonics of degree k. The solid spherical harmonics play a similar role in higher dimensions to the Hermite polynomials in dimension one. Specifically, if f(x) = e^{−πx2}P(x) for some P(x) in A_{k}, then . Let the set H_{k} be the closure in L^{2}(R^{n}) of linear combinations of functions of the form f(x)P(x) where P(x) is in A_{k}. The space L^{2}(R^{n}) is then a direct sum of the spaces H_{k} and the Fourier transform maps each space H_{k} to itself and is possible to characterize the action of the Fourier transform on each space H_{k} Template:Harv. Let f(x) = f_{0}(x)P(x) (with P(x) in A_{k}), then where
Here J_{(n + 2k − 2)/2} denotes the Bessel function of the first kind with order (n + 2k − 2)/2. When k = 0 this gives a useful formula for the Fourier transform of a radial function Template:Harv. Note that this is essentially the Hankel transform. Moreover, there is a simple recursion relating the cases n+2 and n Template:Harv allowing to compute, e.g., the threedimensional Fourier transform of a radial function from the onedimensional one.
Restriction problems
In higher dimensions it becomes interesting to study restriction problems for the Fourier transform. The Fourier transform of an integrable function is continuous and the restriction of this function to any set is defined. But for a squareintegrable function the Fourier transform could be a general class of square integrable functions. As such, the restriction of the Fourier transform of an L^{2}(R^{n}) function cannot be defined on sets of measure 0. It is still an active area of study to understand restriction problems in L^{p} for 1 < p < 2. Surprisingly, it is possible in some cases to define the restriction of a Fourier transform to a set S, provided S has nonzero curvature. The case when S is the unit sphere in R^{n} is of particular interest. In this case the TomasStein restriction theorem states that the restriction of the Fourier transform to the unit sphere in R^{n} is a bounded operator on L^{p} provided 1 ≤ p ≤ (2n + 2) / (n + 3).
One notable difference between the Fourier transform in 1 dimension versus higher dimensions concerns the partial sum operator. Consider an increasing collection of measurable sets E_{R} indexed by R ∈ (0,∞): such as balls of radius R centered at the origin, or cubes of side 2R. For a given integrable function f, consider the function f_{R} defined by:
Suppose in addition that f ∈ L^{p}(R^{n}). For n = 1 and 1 < p < ∞, if one takes E_{R} = (−R, R), then f_{R} converges to f in L^{p} as R tends to infinity, by the boundedness of the Hilbert transform. Naively one may hope the same holds true for n > 1. In the case that E_{R} is taken to be a cube with side length R, then convergence still holds. Another natural candidate is the Euclidean ball E_{R} = {ξ : ξ < R}. In order for this partial sum operator to converge, it is necessary that the multiplier for the unit ball be bounded in L^{p}(R^{n}). For n ≥ 2 it is a celebrated theorem of Charles Fefferman that the multiplier for the unit ball is never bounded unless p = 2 Template:Harv. In fact, when p ≠ 2, this shows that not only may f_{R} fail to converge to f in L^{p}, but for some functions f ∈ L^{p}(R^{n}), f_{R} is not even an element of L^{p}.
Fourier transform on function spaces
On L^{p} spaces
 On L^{1}
The definition of the Fourier transform by the integral formula
is valid for Lebesgue integrable functions f; that is, f ∈ L^{1}(R^{n}).
The Fourier transform : L^{1}(R^{n}) → L^{∞}(R^{n}) is a bounded operator. This follows from the observation that
which shows that its operator norm is bounded by 1. Indeed it equals 1, which can be seen, for example, from the transform of the rect function. The image of L^{1} is a subset of the space C_{0}(R^{n}) of continuous functions that tend to zero at infinity (the Riemann–Lebesgue lemma), although it is not the entire space. Indeed, there is no simple characterization of the image.
 On L^{2}
Since compactly supported smooth functions are integrable and dense in L^{2}(R^{n}), the Plancherel theorem allows us to extend the definition of the Fourier transform to general functions in L^{2}(R^{n}) by continuity arguments. The Fourier transform in L^{2}(R^{n}) is no longer given by an ordinary Lebesgue integral, although it can be computed by an improper integral, here meaning that for an L^{2} function f,
where the limit is taken in the L^{2} sense. Many of the properties of the Fourier transform in L^{1} carry over to L^{2}, by a suitable limiting argument.
Furthermore : L^{2}(R^{n}) → L^{2}(R^{n}) is a unitary operator Template:Harv. For an operator to be unitary it is sufficient to show that it is bijective and preserves the inner product, so in this case these follow from the Fourier inversion theorem combined with the fact that for any f,g∈L^{2}(R^{n}) we have
In particular, the image of L^{2}(R^{n}) is itself under the Fourier transform.
 On other L^{p}
The definition of the Fourier transform can be extended to functions in L^{p}(R^{n}) for 1 ≤ p ≤ 2 by decomposing such functions into a fat tail part in L^{2} plus a fat body part in L^{1}. In each of these spaces, the Fourier transform of a function in L^{p}(R^{n}) is in L^{q}(R^{n}), where is the Hölder conjugate of p. by the Hausdorff–Young inequality. However, except for p = 2, the image is not easily characterized. Further extensions become more technical. The Fourier transform of functions in L^{p} for the range 2 < p < ∞ requires the study of distributions Template:Harv. In fact, it can be shown that there are functions in L^{p} with p > 2 so that the Fourier transform is not defined as a function Template:Harv.
Tempered distributions
{{#invoke:mainmain}} One might consider enlarging the domain of the Fourier transform from L^{1}+L^{2} by considering generalized functions, or distributions. A distribution on R^{n} is a continuous linear functional on the space C_{c}(R^{n}) of compactly supported smooth functions, equipped with a suitable topology. The strategy is then to consider the action of the Fourier transform on C_{c}(R^{n}) and pass to distributions by duality. The obstruction to do this is that the Fourier transform does not map C_{c}(R^{n}) to C_{c}(R^{n}). In fact the Fourier transform of an element in C_{c}(R^{n}) can not vanish on an open set; see the above discussion on the uncertainty principle. The right space here is the slightly larger space of Schwartz functions. The Fourier transform is an automorphism on the Schwartz space, as a topological vector space, and thus induces an automorphism on its dual, the space of tempered distributions Template:Harv. The tempered distributions include all the integrable functions mentioned above, as well as wellbehaved functions of polynomial growth and distributions of compact support.
For the definition of the Fourier transform of a tempered distribution, let f and g be integrable functions, and let and be their Fourier transforms respectively. Then the Fourier transform obeys the following multiplication formula Template:Harv,
Every integrable function f defines (induces) a distribution T_{f} by the relation
So it makes sense to define Fourier transform of T_{f} by
for all Schwartz functions φ. Extending this to all tempered distributions T gives the general definition of the Fourier transform.
Distributions can be differentiated and the abovementioned compatibility of the Fourier transform with differentiation and convolution remains true for tempered distributions.
Generalizations
Fourier–Stieltjes transform
The Fourier transform of a finite Borel measure μ on R^{n} is given by Template:Harv:
This transform continues to enjoy many of the properties of the Fourier transform of integrable functions. One notable difference is that the Riemann–Lebesgue lemma fails for measures Template:Harv. In the case that dμ = f(x)dx, then the formula above reduces to the usual definition for the Fourier transform of f. In the case that μ is the probability distribution associated to a random variable X, the FourierStieltjes transform is closely related to the characteristic function, but the typical conventions in probability theory take e^{ix·ξ} instead of e^{−2πix·ξ} Template:Harv. In the case when the distribution has a probability density function this definition reduces to the Fourier transform applied to the probability density function, again with a different choice of constants.
The Fourier transform may be used to give a characterization of measures. Bochner's theorem characterizes which functions may arise as the Fourier–Stieltjes transform of a positive measure on the circle Template:Harv.
Furthermore, the Dirac delta function is not a function but it is a finite Borel measure. Its Fourier transform is a constant function (whose specific value depends upon the form of the Fourier transform used).
Locally compact abelian groups
{{#invoke:mainmain}} The Fourier transform may be generalized to any locally compact abelian group. A locally compact abelian group is an abelian group that is at the same time a locally compact Hausdorff topological space so that the group operation is continuous. If G is a locally compact abelian group, it has a translation invariant measure μ, called Haar measure. For a locally compact abelian group G, the set of irreducible, i.e. onedimensional, unitary representations are called its characters. With its natural group structure and the topology of pointwise convergence, the set of characters is itself a locally compact abelian group, called the Pontryagin dual of G. For a function f in L^{1}(G), its Fourier transform is defined by Template:Harv:
The RiemannLebesgue lemma holds in this case; is a function vanishing at infinity on .
Gelfand transform
{{#invoke:mainmain}} The Fourier transform is also a special case of Gelfand transform. In this particular context, it is closely related to the Pontryagin duality map defined above.
Given an abelian locally compact Hausdorff topological group G, as before we consider space L^{1}(G), defined using a Haar measure. With convolution as multiplication, L^{1}(G) is an abelian Banach algebra. It also has an involution * given by
Taking the completion with respect to the largest possibly C*norm gives its enveloping C*algebra, called the group C*algebra C*(G) of G. (Any C*norm on L^{1}(G) is bounded by the L^{1} norm, therefore their supremum exists.)
Given any abelian C*algebra A, the Gelfand transform gives an isomorphism between A and C_{0}(A^), where A^ is the multiplicative linear functionals, i.e. onedimensional representations, on A with the weak* topology. The map is simply given by
It turns out that the multiplicative linear functionals of C*(G), after suitable identification, are exactly the characters of G, and the Gelfand transform, when restricted to the dense subset L^{1}(G) is the FourierPontryagin transform.
Compact nonabelian groups
The Fourier transform can also be defined for functions on a nonabelian group, provided that the group is compact. Removing the assumption that the underlying group is abelian, irreducible unitary representations need not always be onedimensional. This means the Fourier transform on a nonabelian group takes values as Hilbert space operators Template:Harv. The Fourier transform on compact groups is a major tool in representation theory Template:Harv and noncommutative harmonic analysis.
Let G be a compact Hausdorff topological group. Let Σ denote the collection of all isomorphism classes of finitedimensional irreducible unitary representations, along with a definite choice of representation U^{(σ)} on the Hilbert space H_{σ} of finite dimension d_{σ} for each σ ∈ Σ. If μ is a finite Borel measure on G, then the Fourier–Stieltjes transform of μ is the operator on H_{σ} defined by
where is the complexconjugate representation of U^{(σ)} acting on H_{σ}. If μ is absolutely continuous with respect to the leftinvariant probability measure λ on G, represented as
for some f ∈ L^{1}(λ), one identifies the Fourier transform of f with the Fourier–Stieltjes transform of μ.
The mapping defines an isomorphism between the Banach space M(G) of finite Borel measures (see rca space) and a closed subspace of the Banach space C_{∞}(Σ) consisting of all sequences E = (E_{σ}) indexed by Σ of (bounded) linear operators E_{σ}: H_{σ} → H_{σ} for which the norm
is finite. The "convolution theorem" asserts that, furthermore, this isomorphism of Banach spaces is in fact an isometric isomorphism of C* algebras into a subspace of C_{∞}(Σ). Multiplication on M(G) is given by convolution of measures and the involution * defined by
and C_{∞}(Σ) has a natural C*algebra structure as Hilbert space operators.
The Peter–Weyl theorem holds, and a version of the Fourier inversion formula (Plancherel's theorem) follows: if f ∈ L^{2}(G), then
where the summation is understood as convergent in the L^{2} sense.
The generalization of the Fourier transform to the noncommutative situation has also in part contributed to the development of noncommutative geometry.{{ safesubst:#invoke:Unsubstdate=__DATE__ $B= {{#invoke:Category handlermain}}{{#invoke:Category handlermain}}^{[citation needed]} }} In this context, a categorical generalization of the Fourier transform to noncommutative groups is Tannaka–Krein duality, which replaces the group of characters with the category of representations. However, this loses the connection with harmonic functions.
Alternatives
In signal processing terms, a function (of time) is a representation of a signal with perfect time resolution, but no frequency information, while the Fourier transform has perfect frequency resolution, but no time information: the magnitude of the Fourier transform at a point is how much frequency content there is, but location is only given by phase (argument of the Fourier transform at a point), and standing waves are not localized in time – a sine wave continues out to infinity, without decaying. This limits the usefulness of the Fourier transform for analyzing signals that are localized in time, notably transients, or any signal of finite extent.
As alternatives to the Fourier transform, in timefrequency analysis, one uses timefrequency transforms or timefrequency distributions to represent signals in a form that has some time information and some frequency information – by the uncertainty principle, there is a tradeoff between these. These can be generalizations of the Fourier transform, such as the shorttime Fourier transform or fractional Fourier transform, or other functions to represent signals, as in wavelet transforms and chirplet transforms, with the wavelet analog of the (continuous) Fourier transform being the continuous wavelet transform. Template:Harv.
Applications
{{#invoke:see alsoseealso}}
Analysis of differential equations
Perhaps the most important use of the Fourier transformation is to solve partial differential equations. Many of the equations of the mathematical physics of the nineteenth century can be treated this way. Fourier studied the heat equation, which in one dimension and in dimensionless units is
The example we will give, a slightly more difficult one, is the wave equation in one dimension,
As usual, the problem is not to find a solution: there are infinitely many. The problem is that of the socalled "boundary problem": find a solution which satisfies the "boundary conditions"
Here, and are given functions. For the heat equation, only one boundary condition can be required (usually the first one). But for the wave equation, there are still infinitely many solutions which satisfy the first boundary condition. But when one imposes both conditions, there is only one possible solution.
It is easier to find the Fourier transform of the solution than to find the solution directly. This is because the Fourier transformation takes differentiation into multiplication by the variable, and so a partial differential equation applied to the original function is transformed into multiplication by polynomial functions of the dual variables applied to the transformed function. After is determined, we can apply the inverse Fourier transformation to find .
Fourier's method is as follows. First, note that any function of the forms
satisfies the wave equation. These are called "the elementary solutions."
Second, note that therefore any integral
(for arbitrary , , , and ) satisfies the wave equation. (This integral is just a kind of continuous linear combination, and the equation is linear.)
Now this resembles the formula for the Fourier synthesis of a function. In fact, this is the real inverse Fourier transform of and in the variable .
The third step is to examine how to find the specific unknown coefficient functions and that will lead to 's satisfying the boundary conditions. We are interested in the values of these solutions at . So we will set . Assuming that the conditions needed for Fourier inversion are satisfied, we can then find the Fourier sine and cosine transforms (in the variable ) of both sides and obtain
and
Similarly, taking the derivative of with respect to and then applying the Fourier sine and cosine transformations yields
and
These are four linear equations for the four unknowns and , in terms of the Fourier sine and cosine transforms of the boundary conditions, which are easily solved by elementary algebra, provided that these transforms can be found.
In summary, we chose a set of elementary solutions, parametrised by , of which the general solution would be a (continuous) linear combination in the form of an integral over the parameter . But this integral was in the form of a Fourier integral. The next step was to express the boundary conditions in terms of these integrals, and set them equal to the given functions and . But these expressions also took the form of a Fourier integral because of the properties of the Fourier transform of a derivative. The last step was to exploit Fourier inversion by applying the Fourier transformation to both sides, thus obtaining expressions for the coefficient functions and in terms of the given boundary conditions and .
George Mackey has called this procedure "Fourier's algorithm." "Harmonic Analysis as the Exploitation of SymmetryA Historical Survey." Rice University Studies Volume 64 (1978), Numbers 2 and 3, pp. 73–228. Reprinted in Bulletin of the American Mathematical Society (New Series) Volume 3 (1980), Number 1 (July—November), pp. 543–698.
In fact, one can perform further manipulations on the answer obtained, but those belong rather to the subject of partial differential equations than to the subject of the Fourier transformation itself.
From a higher point of view, Fourier's procedure can be reformulated more conceptually. Since there are two variables, we will use the Fourier transformation in both and rather than operate as Fourier did, who only transformed in the spatial variables. Note that must be considered in the sense of a distribution since is not going to be : as a wave, it will persist through time and thus is not a transient phenomenon. But it will be bounded and so its Fourier transform can be defined as a distribution. The operational properties of the Fourier transformation that are relevant to this equation are that it takes differentiation in to multiplication by and differentiation with respect to to multiplication by where is the frequency. Then the wave equation becomes an algebraic equation in :
This is equivalent to requiring unless . Right away, this explains why the choice of elementary solutions we made earlier worked so well: obviously will be solutions. Applying Fourier inversion to these delta functions, we obtain the elementary solutions we picked earlier. But from the higher point of view, one does not pick elementary solutions, but rather considers the space of all distributions which are supported on the (degenerate) conic .
We may as well consider the distributions supported on the conic that are given by distributions of one variable on the line plus distributions on the line as follows: if is any test function,
where , and , are distributions of one variable.
Then Fourier inversion gives, for the boundary conditions, something very similar to what we had more concretely above (put , which is clearly of polynomial growth):
and
Now, as before, applying the onevariable Fourier transformation in the variable to these functions of yields two equations in the two unknown distributions (which can be taken to be ordinary functions if the boundary conditions are or ).
From a calculational point of view, the drawback of course is that one must first calculate the Fourier transforms of the boundary conditions, then assemble the solution from these, and then calculate an inverse Fourier transform. Closed form formulas are rare, except when there is some geometric symmetry that can be exploited, and the numerical calculations are difficult because of the oscillatory nature of the integrals, which makes convergence slow and hard to estimate. For practical calculations, other methods are often used.
The twentieth century has seen the extension of these methods to all linear partial differential equations with polynomial coefficients, and by extending the notion of Fourier transformation to include Fourier integral operators, some nonlinear equations as well.
Fourier transform spectroscopy
{{#invoke:mainmain}} The Fourier transform is also used in nuclear magnetic resonance (NMR) and in other kinds of spectroscopy, e.g. infrared (FTIR). In NMR an exponentially shaped free induction decay (FID) signal is acquired in the time domain and Fouriertransformed to a Lorentzian lineshape in the frequency domain. The Fourier transform is also used in magnetic resonance imaging (MRI) and mass spectrometry.
Quantum mechanics
The Fourier transform is useful in Quantum Mechanics in two different ways. To begin with, the basic conceptual structure of Quantum Mechanics postulates the existence of pairs of complementary variables, connected by the Heisenberg uncertainty principle. For example, in one dimension, the spatial variable of, say, a particle, can only be measured by the quantum mechanical "position operator" at the cost of losing information about the momentum of the particle. Therefore the physical state of the particle can either be described by a function, called "the wave function", of or by a function of but not by a function of both variables. The variable is called the conjugate variable to . In Classical Mechanics, the physical state of a particle (existing in one dimension, for simplicityof exposition) would be given by assigning definite values to both and simultaneously. Thus, the set of all possible physical states is the twodimensional real vector space with a axis and a axis.
In contrast, Quantum Mechanics chooses a polarisation of this space in the sense that it picks a subspace of onehalf the dimension, for example, the axis alone, but instead of considering only points, takes the set of all complexvalued "wave function" on this axis. Nevertheless, choosing the axis is an equally valid polarisation, yielding a different representation of the set of possible physical states of the particle which is related to the first representation by the Fourier transformation
Physically realisable states are , and so by the Plancherel theorem, their Fourier transforms are also . (Note that since is in units of distance and is in units of momentum, the presence of Planck's constant in the exponent makes the exponent dimensionless, as it should be.)
Therefore, the Fourier transform can be used to pass from one way of representing the state of the particle, by a wave function of position, to another way of representing the state of the particle: by a wave function of momentum. Infinitely many different polarisations are possible, and all are equally valid. Being able to transform states from one representation to another is sometimes convenient.
The other use of the Fourier transform in both Quantum Mechanics and Quantum Field Theory is to solve the applicable wave equation. In nonrelativistic Quantum Mechanics, Schroedinger's equation for a timevarying wave function in onedimension, not subject to external forces, is
This is the same as the heat equation except for the presence of the imaginary unit . Fourier methods can be used to solve this equation.
In the presence of a potential, given by the potential energy function , the equation becomes
The "elementary solutions", as we referred to them above, are the socalled "stationary states" of the particle, and Fourier's algorithm, as described above, can still be used to solve the boundary value problem of the future evolution of given its values for . Neither of these approaches is of much practical use in Quantum Mechanics. Boundary value problems and the timeevolution of the wave function is not of much practical interest: it is the stationary states that are most important.
In relativistic Quantum Mechanics, Schroedinger's equation becomes a wave equation as was usual in classical physics, except that complexvalued waves are considered. A simple example, in the absence of interactions with other particles or fields, is the free onedimensional KleinGordonSchroedingerFock equation, this time in dimensionless units,
This is, from the mathematical point of view, the same as the wave equation of classical physics solved above (but with a complexvalued wave, which makes no difference in the methods). This is of great use in Quantum Field Theory: each separate Fourier component of a wave can be treated as a separate harmonic oscillator and then quantised, a procedure known as "second quantisation". Fourier methods have been adapted to also deal with nontrivial interactions.
Signal processing
The Fourier transform is used for the spectral analysis of timeseries. The subject of statistical signal processing does not, however, usually apply the Fourier transformation to the signal itself. Even if a real signal is indeed transient in that it began after 4004 B.C. and will end before the next millennium, it has been found in practice advisable to model a signal by a function (or, alternatively, a stochastic process) which is stationary in the sense that its characteristic properties are constant over all time. The Fourier transform of such a function does not exist in the usual sense, and it has been found more useful for the analysis of signals to instead take the Fourier transform of its autocorrelation function.
The autocorrelation function of a function is defined by
This function is a function of the timelag elapsing between the values of to be correlated.
For most functions that occur in practice, is a bounded even function of the timelag and for typical noisy signals it turns out to be uniformly continuous with a maximum at zero.
The autocorrelation function, more properly called the autocovariance function unless it is normalised in some appropriate fashion, measures the strength of the correlation between the values of separated by a timelag. This is a way of searching for the correlation of with its own past. It is useful even for other statistical tasks besides the analysis of signals. For example, if represents the temperature at time , one expects a strong correlation with the temperature at a timelag of 24 hours.
It possesses a Fourier transform,
This Fourier transform is called the power spectral density function of . (Unless all periodic components are first filtered out from , this integral will diverge, but it is easy to filter out such periodicities.)
The power spectrum, as indicated by this density function , measures the amount of variance contributed to the data by the frequency . In electrical signals, the variance is proportional to the average power (energy per unit time), and so the power spectrum describes how much the different frequencies contribute to the average power of the signal. This process is called the spectral analysis of timeseries and is analogous to the usual analysis of variance of data that is not a timeseries (ANOVA).
Knowledge of which frequencies are "important" in this sense is crucial for the proper design of filters and for the proper evaluation of measuring apparatuses. It can also be useful for the scientific analysis of the phenomena responsible for producing the data.
The power spectrum of a signal can also be approximately measured directly by measuring the average power that remains in a signal after all the frequencies outside a narrow band have been filtered out.
Spectral analysis is carried out for visual signals as well. The power spectrum ignores all phase relations, which is good enough for many purposes, but for video signals other types of spectral analysis must also be employed, still using the Fourier transform as a tool.
Other notations
Other common notations for include:
Denoting the Fourier transform by a capital letter corresponding to the letter of function being transformed (such as f(x) and F(ξ)) is especially common in the sciences and engineering. In electronics, the omega (ω) is often used instead of ξ due to its interpretation as angular frequency, sometimes it is written as F(jω), where j is the imaginary unit, to indicate its relationship with the Laplace transform, and sometimes it is written informally as F(2πf) in order to use ordinary frequency.
The interpretation of the complex function may be aided by expressing it in polar coordinate form
in terms of the two real functions A(ξ) and φ(ξ) where:
is the amplitude and
is the phase (see arg function).
Then the inverse transform can be written:
which is a recombination of all the frequency components of f(x). Each component is a complex sinusoid of the form e^{2πixξ} whose amplitude is A(ξ) and whose initial phase angle (at x = 0) is φ(ξ).
The Fourier transform may be thought of as a mapping on function spaces. This mapping is here denoted and is used to denote the Fourier transform of the function f. This mapping is linear, which means that can also be seen as a linear transformation on the function space and implies that the standard notation in linear algebra of applying a linear transformation to a vector (here the function f) can be used to write instead of . Since the result of applying the Fourier transform is again a function, we can be interested in the value of this function evaluated at the value ξ for its variable, and this is denoted either as or as . Notice that in the former case, it is implicitly understood that is applied first to f and then the resulting function is evaluated at ξ, not the other way around.
In mathematics and various applied sciences, it is often necessary to distinguish between a function f and the value of f when its variable equals x, denoted f(x). This means that a notation like formally can be interpreted as the Fourier transform of the values of f at x. Despite this flaw, the previous notation appears frequently, often when a particular function or a function of a particular variable is to be transformed.
For example, is sometimes used to express that the Fourier transform of a rectangular function is a sinc function,
or is used to express the shift property of the Fourier transform.
Notice, that the last example is only correct under the assumption that the transformed function is a function of x, not of x_{0}.
Other conventions
The Fourier transform can also be written in terms of angular frequency: ω = 2πξ whose units are radians per second.
The substitution ξ = ω/(2π) into the formulas above produces this convention:
Under this convention, the inverse transform becomes:
Unlike the convention followed in this article, when the Fourier transform is defined this way, it is no longer a unitary transformation on L^{2}(R^{n}). There is also less symmetry between the formulas for the Fourier transform and its inverse.
Another convention is to split the factor of (2π)^{n} evenly between the Fourier transform and its inverse, which leads to definitions:
Under this convention, the Fourier transform is again a unitary transformation on L^{2}(R^{n}). It also restores the symmetry between the Fourier transform and its inverse.
Variations of all three conventions can be created by conjugating the complexexponential kernel of both the forward and the reverse transform. The signs must be opposites. Other than that, the choice is (again) a matter of convention.
ordinary frequency ξ (hertz)  unitary  

angular frequency ω (rad/s)  unitary  
nonunitary  
As discussed above, the characteristic function of a random variable is the same as the Fourier–Stieltjes transform of its distribution measure, but in this context it is typical to take a different convention for the constants. Typically characteristic function is defined .
As in the case of the "nonunitary angular frequency" convention above, there is no factor of 2π appearing in either of the integral, or in the exponential. Unlike any of the conventions appearing above, this convention takes the opposite sign in the exponential.
Tables of important Fourier transforms
Template:Split section The following tables record some closedform Fourier transforms. For functions f(x), g(x) and h(x) denote their Fourier transforms by , , and respectively. Only the three most common conventions are included. It may be useful to notice that entry 105 gives a relationship between the Fourier transform of a function and the original function, which can be seen as relating the Fourier transform and its inverse.
Functional relationships
The Fourier transforms in this table may be found in Template:Harvtxt or Template:Harvtxt.
Function  Fourier transform unitary, ordinary frequency 
Fourier transform unitary, angular frequency 
Fourier transform nonunitary, angular frequency 
Remarks  




Definition  
101  Linearity  
102  Shift in time domain  
103  Shift in frequency domain, dual of 102  
104  Scaling in the time domain. If is large, then is concentrated around 0 and spreads out and flattens.  
105  Duality. Here needs to be calculated using the same method as Fourier transform column. Results from swapping "dummy" variables of and or or .  
106  
107  This is the dual of 106  
108  The notation denotes the convolution of and — this rule is the convolution theorem  
109  This is the dual of 108  
110  For purely real  Hermitian symmetry. indicates the complex conjugate.  
111  For a purely real even function  , and are purely real even functions.  
112  For a purely real odd function  , and are purely imaginary odd functions.  
113  Complex conjugation, generalization of 110 
Squareintegrable functions
The Fourier transforms in this table may be found in Template:Harv, Template:Harv, or the appendix of Template:Harv.
Function  Fourier transform unitary, ordinary frequency 
Fourier transform unitary, angular frequency 
Fourier transform nonunitary, angular frequency 
Remarks  





main}} 201  The rectangular pulse and the normalized sinc function, here defined as sinc(x) = sin(πx)/(πx)  
202  Dual of rule 201. The rectangular function is an ideal lowpass filter, and the sinc function is the noncausal impulse response of such a filter. The sinc function is defined here as sinc(x) = sin(πx)/(πx)  
203  The function tri(x) is the triangular function  
204  Dual of rule 203.  
205  The function u(x) is the Heaviside unit step function and a>0.  
206  This shows that, for the unitary Fourier transforms, the Gaussian function exp(−αx^{2}) is its own Fourier transform for some choice of α. For this to be integrable we must have Re(α)>0.  
207  For a>0. That is, the Fourier transform of a twosided decaying exponential function is a Lorentzian function.  
208  Hyperbolic secant is its own Fourier transform  
209  is the Hermite's polynomial. If a = 1 then the GaussHermite functions are eigenfunctions of the Fourier transform operator. For a derivation, see Hermite polynomial. The formula reduces to 206 for n = 0. 
Distributions
The Fourier transforms in this table may be found in Template:Harv or the appendix of Template:Harv.
Function  Fourier transform unitary, ordinary frequency 
Fourier transform unitary, angular frequency 
Fourier transform nonunitary, angular frequency 
Remarks  





301  The distribution δ(ξ) denotes the Dirac delta function.  
302  Dual of rule 301.  
303  This follows from 103 and 301.  
304  This follows from rules 101 and 303 using Euler's formula:  
305  This follows from 101 and 303 using  
306  
307  
308  Here, n is a natural number and is the nth distribution derivative of the Dirac delta function. This rule follows from rules 107 and 301. Combining this rule with 101, we can transform all polynomials.  
309  Here sgn(ξ) is the sign function. Note that 1/x is not a distribution. It is necessary to use the Cauchy principal value when testing against Schwartz functions. This rule is useful in studying the Hilbert transform.  
310  
1/x^{n} is the homogeneous distribution defined by the distributional derivative  
311  This formula is valid for 0 > α > −1. For α > 0 some singular terms arise at the origin that can be found by differentiating 318. If Re α > −1, then is a locally integrable function, and so a tempered distribution. The function is a holomorphic function from the right halfplane to the space of tempered distributions. It admits a unique meromorphic extension to a tempered distribution, also denoted for α ≠ −2, −4, ... (See homogeneous distribution.)  
Special case of 311.  
312  The dual of rule 309. This time the Fourier transforms need to be considered as Cauchy principal value.  
313  The function u(x) is the Heaviside unit step function; this follows from rules 101, 301, and 312.  
314  This function is known as the Dirac comb function. This result can be derived from 302 and 102, together with the fact that  
315  The function J_{0}(x) is the zeroth order Bessel function of first kind.  
316  This is a generalization of 315. The function J_{n}(x) is the nth order Bessel function of first kind. The function T_{n}(x) is the Chebyshev polynomial of the first kind.  
317  is the Euler–Mascheroni constant.  
318 